This commit fixes ticker cross-schedule bug in test_case_2x_callbacks subtest
In effect of this bug:
ticker_callback_1_switch_to_2 was called only once
ticker2 was never been fired because it was repeatedly detached just before fire and attached again
The current 0.1% clock tolerance is too small for certain platforms
which natural variance is larger than this. This commit increases the
tolerance to 0.5% instead.
Sample output from time_cpu_cycles called repeatedly in init,
before running any flash tests:
[1515706585.63][CONN][RXD] diff: 49316
[1515706585.69][CONN][RXD] diff: 49256
[1515706585.75][CONN][RXD] diff: 49286
[1515706585.81][CONN][RXD] diff: 49256
[1515706585.87][CONN][RXD] diff: 49225
[1515706585.94][CONN][RXD] diff: 49286
[1515706585.99][CONN][RXD] diff: 49317
[1515706586.06][CONN][RXD] diff: 49255
[1515706586.12][CONN][RXD] diff: 49286
[1515706586.18][CONN][RXD] diff: 49285
[1515706586.24][CONN][RXD] diff: 49286
[1515706586.31][CONN][RXD] diff: 49347
[1515706586.36][CONN][RXD] diff: 49347
[1515706586.43][CONN][RXD] diff: 49286
[1515706586.49][CONN][RXD] diff: 49286
[1515706586.55][CONN][RXD] diff: 49256
[1515706586.61][CONN][RXD] diff: 49286
[1515706586.68][CONN][RXD] diff: 49346
[1515706586.74][CONN][RXD] diff: 49347
[1515706586.80][CONN][RXD] diff: 49256
Notice the outliers will cause intermittent CI failures.
For each of the following years test example time of the first and last day of each month:
- first - 1970
- example not leap year (not divisible by 4)
- example leap year (divisible by 4 and by 100 and by 400)
- example leap year (divisible by 4 and not by 100)
- example not leap year (divisible by 4 and by 100)
- last fully supported - 2105
Test execution time on K64F is now ~39 sec.
In pararell threads of "thread" test is a simple thread, but it seems that there is a difference in the stack used between Cortex-A and Cortex-M.
As a result of check, in Cortex-A, program aborts because of the lack of stack when PARALLEL_THREAD_STACK_SIZE is 384, workes properly when PARALLEL_THREAD_STACK_SIZE is 512 at least.
"malloc" test is used a simple thread that executes only malloc and free, but it seems that there is a difference in the stack used between Cortex-A and Cortex-M.
As a result of check, in Cortex-A, program aborts because of the lack of stack when THREAD_STACK_SIZE is 256, workes properly when THREAD_STACK_SIZE is 512 at least. Since it seems that the definition processing of "DEFAULT_STACK_SIZE" was gone from Mbed OS by updating CMSIS5/RTX5, I setted 512 directly for Cortex-A.
Most of our IP stacks don't allow removal of interfaces so
interface destructor can not reliably clean up. Therefore we
cannot rely its behaviours in test case.
Instead run interface->disconnect() in case interface was already
created.
HTTP_SERVER_NAME and HTTP_SERVER_FILE_PATH are replaced by
MBED_CONF_APP_HTTP_SERVER_NAME and MBED_CONF_APP_HTTP_SERVER_FILE_PATH
to allow user to make local tests
Test on HTTP connect added as test was always OK even with no connection...
HTTP_SERVER_NAME and HTTP_SERVER_FILE_PATH are replaced by
MBED_CONF_APP_HTTP_SERVER_NAME and MBED_CONF_APP_HTTP_SERVER_FILE_PATH
to allow user to make local tests
UUID lines are removed as they were not used
default case:
If MBED_CONF_APP_ECHO_SERVER_ADDR and MBED_CONF_APP_ECHO_SERVER_PORT are not defined
test is using Greentea to get server information (code before OS 5.6.1 version)
TCP_ECHO_PREFIX is no more a mandatory step
UUID lines are removed as they were not used
default case:
If MBED_CONF_APP_ECHO_SERVER_ADDR and MBED_CONF_APP_ECHO_SERVER_PORT are not defined
test is using Greentea to get server information (code before OS 5.6.1 version)
The test for construction of local static objects doesn't check
to see if the object returned has been fully initialized. Because
of this, an error with ARMCC was not detected.
This patch adds an assert to the race_test to ensure that the
object has been properly initialized.
LowPoterTimer test gives sometimes failed result while testing measured time accumulation. The check which verifies if total number of elapsed milliseconds is valid fails. Test assumes that delta value equal to 1 ms is sufficient for all test cases, which is not true since in case where time measurement is performed few times in sequence the measurement error also accumulates and 1 ms might be not enough. To solve this problem delta value for milliseconds tests must be updated.
1) if we receive more than one __sync, previous handshake would consider
it as echo_count and try to decode the value. Now we skip superfluous __sync.
2) reduce the uart load produced by the test, as we are heavily running tests in
parallel and not one-to-one this update was required.
Allow tickers to specify their native frequency and number of bits.
This allows the conversion to happen in common code rather than in
each vendor's implementation.
In test_case_2x_callbacks two tickers are setup to repeatedly
reschedule each other. When these tickers are deleted this
rescheduling is still occurring and can lead to a deleted ticker
being scheduled.
When this happens the following error message is displayed:
Thread 0x0 error -6: Not allowed in ISR context
Note - this problem was not detected by CI since the test reported
the correct results back to the host test and only experienced this
error on tear down.
This problem can be reproduced on an nrf51 by first building the ticker
test with:
"mbed test -t GCC_ARM -m NRF51_DK -n tests-mbed_drivers-ticker
--compile -DMBED_TRAP_ERRORS_ENABLED=1
-DMBED_HEAP_STATS_ENABLED=1 -DMBED_STACK_STATS_ENABLED=1"
And then running testing with:
"mbed test -t GCC_ARM -m NRF51_DK -n tests-mbed_drivers-ticker --run"
This commit reverts commit c1c0f1ea57
because it causes nightly builds to fail. This is because extra tests
added in tests-mbed_drivers-ticker fail on some targets, such as the
KL46Z, MAX32625MBED, MAX32630FTHR, NCS36510, NRF51 and NRF52_DK.
Remove the direct use of the microsecond and low power ticker from
the tests. This enforces that sleep mode is properly locked when
using timers. Furthermore, this prepares the codebase for new ticker
changes which allow differing clock frequencies and timer bit widths.
The lp_ticker test overrides the default ticker handler for the
low power ticker. This stops all other low power TimerEvents in the
system, including the ones for tickless, from getting called. Because
of this devices with tickless enabled malfunction during this test.
This patch fixes this problem by passing all lp ticker events it did
not trigger on to the TimerEvent irq handler.
Increase the Timeout period from 1ms to 10ms so interrupt latency has
1/10th the effect on the measurement. This prevents failures due to
interrupt latency causing a drift.
In case the target supports a page size of 1 byte, i.e. is able to
program flash 1 byte at a time, which is the case of STM32 F4 targets,
there is no reason for flash_device.program to return an error when
trying to write on an "unaligned" address.
This test exercises ticker API
- init should be executed just once
- read timestamp
Set interrupt should be tested via upper layer, as it does not provide
API to change handler that is invoked in the ISR ticker handler.
The test assumed that data written to flash would be memory mapped
and directly accessible. On some platform this is not the case
and data has to read back through an explicit read command.
The test has been changed to use the flash read command instead
of direct memory access.
2 test cases added, one for event in the past, one for event in future but very close
to the current time, thus once is set, it is already in the past, and we fire
interrupt immediately.
1) mbed-os-tests-mbedmicro-rtos-mbed-basic tests use to fail when run in loop
after 20-25, This was because the stack used by test application was in range of
744-840 bytes. So bumped the stack size to 1024 bytes.
2) Corrected the assert and taken out the assert which was not required.
In the new approach the host controls the device activity when the test
should start, finish and pass/fail status is send to device. Also deprecate
the test cases which can't accurately test.
Initialize all values of timeinfo in make_time_info. This prevents
the field 'tm_isdst' from getting inadvertently set to 1 causing
time to be off by 1 hour.
The use of mktime was causing a fault when called in interrupt handler because on GCC it lock the mutex protecting the environment, To overcome this issue, this patch add dedicated routine to convert a time_t into a tm and vice versa.
In the process mktime has been optimized and is now an order of magnitude faster than the routines present in the C library.
This test was removed because of its memory footprint.
Most of the memory consummed by the test itself was related to the instantion of test cases in RAM.
With the introduction of case_t which allows tests cases to live in FLASH, the memory footprint has been drastically reduced (860 bytes of RAM saved) and the ticker test can be reintroduced in the code base.
This is temporary, as this test does not fit to some 16kB RAM devices. This requires few more steps: some small devices are using big async HAL structures, RTX changes increased the RAM footprint, plus this test seems to be too big. With all these, it won't fit in RAM regions for some devices.
Maciej Bocianski
Cruz Monrreal
Przemyslaw Stekiel
Marcus Chang
Senthil Ramakrishnan
Jimmy Brisson
Martin Kojtal
jeromecoutant
Anna Bridge
Veijo Pesonen
TomoYamanaka
Seppo Takalo
Russ Butler
Wolfgang Betz
Mika Leppänen
Bartek Szatkowski
Sarah Marsh
Filip Jagodzinski
Russ Butler
Przemyslaw Stekiel
Shrikant Tudavekar
YarivCol
Deepika
Shrikant Tudavekar
Laurent MEUNIER
Christopher Haster
Chris
adustm
Sam Grove
Vincent Coubard