STM32F303ZE was introduced in parallel to the changes which consist in
having family wide definitions like device.h file and a common objects
definition.
This target is updated accordingly now to benefit of SPI definitions.
Now that SPI_ASYNCH is supported on all STM32 based boards,
let's activate the feature.
Using a default SPI QUEUE of size 2 - this can be later modified if this
prives to be to low. (or too high)
ASYNCH SPI transfer support has been added based on STM HAL services.
To have both ASYNCH and SYNCH work together, we're also moving the
write API to STM HAL instead of direct registers access.
the SPI_ASYNCH feature has been already activated for STM32F4.
This patchset makes it supported on all STM32 families by:
- moving spi_s structure at family level instead of board level
- using the F4 spi_api.c reference implementation and making it a common
stm_spi_api.c file which makes maintenance a lot easier.
- the only part that needs to be implemented for each family is the computation
of the clock frequency input to the spi peripheral which is not the same
accross families. So this is what remains in the spi_api.c of each family.
Because of the introduction of the common file, all the above modifications
needs to be done at once.
- Remove waiting for 'BTF' flag in 'i2c_stop()':
When 'i2c_stop()' is called from 'i2c_read()' or 'i2c_write()' flag 'BTF'
has already been cleared (indirectly) by the calling functions and therefore
'i2c_stop()' would mistakenly always run into a timeout.
- Delay clock enabling until pins are configured:
Enabling the I2C bus clock before configuring its pins might in rare
cases lead to HW faults on the bus.
- Move initialization of 'handle->Instance' to function 'i2c_reset()':
As 'i2c_reset()' uses '__HAL_I2C_GET_FLAG(handle, I2C_FLAG_BUSY)' field
'handle->Instance' must have been initialized before doing so. Therefore,
this operation has been anticipated by moving it from function
'i2c_frequency()' to function 'i2c_reset()'.
1. Move M451Series.h to device.
2. Move StdDriver to device.
3. Move TOOLCHAIN_* to device.
4. Move cmsis*, startup_M451Series.c, and system_M451Series.c/h to device.
Sam Grove
Mahadevan Mahesh
Laurent MEUNIER
Laurent MEUNIER
Russ Butler
Jeremy Brodt
Kevin Gillespie
pradeep-gr
jeromecoutant
Wolfgang Betz
Bartek Szatkowski
Sarah Marsh
ccli8
cyliangtw