Patch to LPC546XX SDK code - write the low Ethernet MAC address
register last, as that synchronises the update.
Without this change, the ENET_SetMacAddr call only seems to work prior
to MAC initialisation, causing problems for the new mbed OS EMAC system,
which expects it to be changable later.
Updated emac greentea tests #6851.
Implementation of unified EMAC driver for Renesas mbed boards
Based on the driver so far, Renesas implemented the emac driver for GR-PEACH and VK-RZ/A1H.
The mainly changes is below.
- Add the connection part with LWIP according to the unified emac specification.
- Add three new multicast functions(add, remove, set_all).
The Greentea test netsocket and emac test passed.
Just checking "does the chip have an EMAC" doesn't work - there are
targets using those chips which do not have an Ethernet connector and
don't provide the necessary surrounding infrastructure (eg DISCO_F429ZI,
not providing the board emac config call, and HEXIWEAR not providing PHY
info).
Make the targets that actually do want EMAC define their own local
Freescale_EMAC and STM_EMAC labels, and move the drivers into
the corresponding TARGET_ directories, removing the #ifdefs.
Initial work by Bartek Szatkowski in https://github.com/ARMmbed/mbed-os/pull/4079,
reworked following review of https://github.com/ARMmbed/mbed-os/pull/5202 to
transform the entire system into C++, retaining the basic functionality.
Bartek's summary:
* Porting ethernet to EMAC
* Updating EMAC to enable multiple interfaces
* Untangling networking classes, making the abstractions a bit clearer to follow, etc
* General refactoring
* Removal of DEVICE_EMAC flag and introducing DEVICE_ETH and DEVICE_WIFI
Revisions since initial branch:
* Remove lwip depencies
* Correct doxygen warnings
* Remove emac_api.h, replace with C++ EMAC abstract class.
* Create OnboardNetworkInterface, and LWIP implementation.
* Mappings since #4079
lwip-interface/nsapi_stack_lwip.c -> LWIPStack.cpp
lwip-interface/ipstack_lwip.c -> LWIPInterface.cpp
netsocket/mbed_ipstack.h -> OnboardNetworkStack.h
hal/emac_api.h -> EMAC.h
* Reinstate use of EthInterface abstraction
* Correct and clarify HW address EMAC ops
* Restore MBED_MAC_ADDR implementation
* Integrate PPP support with LWIP::Interface.
* Convert K64F lwIP driver to K64F_EMAC.
To do:
* Convert emac_stack_mem.h to follow this pattern.
* Figure out DEVICE_ETH/EMAC
* Update all drivers to use EMAC
New directory structure:
* TARGET_SOFTDEVICE_COMMON
* TARGET_SOFTDEVICE_S112
* TARGET_SOFTDEVICE_S132_FULL (MBR + SoftDevice, default)
* TARGET_SOFTDEVICE_S132_OTA (SoftDevice only, for firmware updates)
* TARGET_SOFTDEVICE_S132_MBR (MBR only, for bootloader builds)
* TARGET_SOFTDEVICE_S140_FULL (MBR + SoftDevice, default)
* TARGET_SOFTDEVICE_S140_OTA (SoftDevice only, for firmware updates)
* TARGET_SOFTDEVICE_S140_MBR (MBR only, for bootloader builds)
* TARGET_SOFTDEVICE_NONE
The X_OTA and X_MBR binaries are obtained from the original x_FULL SoftDevice
by splitting it in an MBR part and a SoftDevice part. The MBR is needed for
the bootloader and the SoftDevice for firmware updates.
Build application without SoftDevice:
"target_overrides": {
"*": {
"target.extra_labels_remove": ["SOFTDEVICE_COMMON", "SOFTDEVICE_X_FULL"],
"target.extra_labels_add": ["SOFTDEVICE_NONE"]
}
}
Build application for firmware update using SoftDevice X:
"target_overrides": {
"*": {
"target.extra_labels_remove": ["SOFTDEVICE_X_FULL"],
"target.extra_labels_add": ["SOFTDEVICE_X_OTA"]
}
}
Build bootloader without SoftDevice X:
"target_overrides": {
"*": {
"target.extra_labels_remove": ["SOFTDEVICE_COMMON", "SOFTDEVICE_X_FULL"],
"target.extra_labels_add": ["SOFTDEVICE_X_MBR"]
}
}
In current implementation `rtc_read` function returns number of elapsed us and `rtc_write` function sets RTC time to specified value in us.
Mbed HAL API expects that these functions operate on seconds.
Since lp ticker is also based on RTC provide mechanism to trace elapsed seconds without modifying RTC registers.
The unified NRF51 target and feature BLE directories have been
reorganized to follow the naming and directory structure of the
NRF52 implementation.
This reorganization does not include TARGET_MCU_NRF51822 and
derived targets.
The MBR VTOR state depends on how the application is booted.
This makes it difficult to initialize the MBR correctly since a
bug prevents the MBR from being initialized more than once.
This commit resets the MBR and SoftDevice to a known state before
initializing the MBR and setting the VTOR through the SoftDevice.
Delayed initialization can cause problems when both UARTE instances
are in use. This change causes each UART object to initialize the
underlying UARTE instance immediately.
Certain instances of the TPM are missing some registers, updated
TPM driver handles this variation. This issue was discovered when
running the PWMOUT tests using the ci-test-shield
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Asif Rizwan
Kevin Bracey
Mahesh Mahadevan
Michael Zhang
TomoYamanaka
cyliangtw
Mika Leppänen
Cruz Monrreal
bcostm
Marcus Chang
Przemyslaw Stekiel
Keyur Hariya
Martin Kojtal