Inherit methods gethostbyname, gethostbyname_async and get_dns_server
to Nanostack class. Methods will try to find DNS server address
or DNS query results from Nanostack DNS cache.
Added support for external RADIUS server configuration to Wi-SUN Border Router.
Added configuration functions and .json configuration options for:
- external RADIUS server IPv6 address
- RADIUS shared secret.
PAE supplicant did not detect correctly that network name or PAN ID
was changed on authentication start. This causes the supplicant to
use old keys and old BR EUI-64 during authentication, which resulted
to BR EUI-64 mismatch on 4WH.
* upstream/mbed-os-5.15: (47 commits)
Update mbed version to 5.15.4
Squashed 'features/nanostack/sal-stack-nanostack/' changes from cc03296c27..b3fe5744d1
Squashed 'features/frameworks/nanostack-libservice/' changes from 9a61e73787..c6cae6992a
802.15.4 MCR20A RF driver update
802.15.4 Atmel RF driver update
802.15.4 STM S2LP driver update
Added Wi-SUN statistics interface
Allowed to set Wi-SUN certificates in DISCONNECTED state
Change unrecognised features to a warning, rather than error
Fix assertation ordering in tests
Define mbedtls_ecc_group_to_psa inline for NS world
Remove references to mbed-crypto
Move Mbed Crypto Greentea tests to Mbed TLS
Update Mbed TLS to latest version
Adjust Mbed TLS importer and config script
tls: Remove apache-2.0.txt from importer script
tools: Fix grammar in feature error message
M2351: Enable non-PSA minimal secure build
Cellular: Enable tac info for ALT1250
Nuvoton: Change WDT clock source to LXT
...
-Taken modification for adding IID in BR info structure.
-Added API to get RPL info for Wi-SUN router and BR.
-Added API to get routing table info from BR.
Mbed Crypto has been remerged back into Mbed TLS. Update the
Mbed TLS importer script with the relevant parts of the
Mbed Crypto importer.
Signed-off-by: Darryl Green <darryl.green@arm.com>
Both Mbed TLS and Mbed Crypto libraries doesn't contain
`apache-2.0.txt` anymore. Do not access those files in the importer
script.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Add getsockopt options NSAPI_LATENCY and NSAPI_STAGGER to read
network specific timing constraints from socket.
-NS_LATENCY returns estimated latency to given address.
-NSAPI_STAGGER returns estimated initial delay that application
should wait before transmitting data to network.
Application can use the new options to avoid network congestion by
adjusting transmission delays and retry timeouts.
Add wrappers to make API usage easier:
-get_rtt_estimate_to_address
-get_stagger_estimate_to_address
This is backport of the https://github.com/ARMmbed/mbed-os/pull/12522
Add getsockopt options NSAPI_LATENCY and NSAPI_STAGGER to read
network specific timing constraints from socket.
-NS_LATENCY returns estimated latency to given address.
-NSAPI_STAGGER returns estimated initial delay that application
should wait before transmitting data to network.
Application can use the new options to avoid network congestion by
adjusting transmission delays and retry timeouts.
Add wrappers to make API usage easier:
-get_rtt_estimate_to_address
-get_stagger_estimate_to_address
This is backport of the https://github.com/ARMmbed/mbed-os/pull/12522
BLOCK2 code-branch was missing handling for duplicate packets. As part of the fix, added also
a call to update the duplicate package data via a new function
sn_coap_protocol_update_duplicate_package_data_all.
The new implementation handles all CoAP messages, not just those with COAP_MSG_TYPE_ACKNOWLEDGEMENT.
Add also 4.13 (Request Entity Too Large) responses to duplicate info list.
Add client library configurations for DEFAULT_RESPONSE_TIMEOUT and SN_COAP_DUPLICATION_MAX_TIME_MSGS_STORED.
Increased the default timeouts of DEFAULT_RESPONSE_TIMEOUT and SN_COAP_DUPLICATION_MAX_TIME_MSGS_STORED to 300 seconds.
These two are critical parameters for low-bandwidth high-latency networks. The defaults should be more geared towards such networks that are likely to have issues with transmissions.
The increased defaults can increase the runtime HEAP usage when there is a lot of duplicates or retransmissions.
BLOCK2 code-branch was missing handling for duplicate packets. As part of the fix, added also
a call to update the duplicate package data via a new function
sn_coap_protocol_update_duplicate_package_data_all.
The new implementation handles all CoAP messages, not just those with COAP_MSG_TYPE_ACKNOWLEDGEMENT.
Add also 4.13 (Request Entity Too Large) responses to duplicate info list.
Add client library configurations for DEFAULT_RESPONSE_TIMEOUT and SN_COAP_DUPLICATION_MAX_TIME_MSGS_STORED.
Increased the default timeouts of DEFAULT_RESPONSE_TIMEOUT and SN_COAP_DUPLICATION_MAX_TIME_MSGS_STORED to 300 seconds.
These two are critical parameters for low-bandwidth high-latency networks. The defaults should be more geared towards such networks that are likely to have issues with transmissions.
The increased defaults can increase the runtime HEAP usage when there is a lot of duplicates or retransmissions.
This change is provided by Packetcraft (which maintains the
Cordio BLE stack) to address possible Sweyntooth vulnerabilities.
(cherry picked from commit c927773115)
This change is provided by Packetcraft (which maintains the
Cordio BLE stack) to address possible Sweyntooth vulnerabilities.
(cherry picked from commit 0402fe4efb)
Issue: The problem is that there is a race condition introduced in that the LWIP thread is relying on the
interface as it is taken down by a application thread while calling disconnect.
In disconnect api called from application context, whd_emac_wifi_link_state_changed() will refer to netif interface
structure in its callback api netif_link_irq(netif). This netif will be cleared by remove_etherent_interface().
whd_emac_wifi_link_state_changed will post message to tcpip_thread. tcpip_thread will process the message and
call the callback api netif_link_irq(netif)
Calling sequence is whd_emac_wifi_link_state_changed -> remove_etherent_interface(). Hence there is a timing issue
that netif might be cleared first before tcpip thread process the message netif_link_irq(netif)
Fix: remove_etherent_interface() will post message to tcpip thread and tcpip:
thread process the message delete_interface()
which will actually remove the inferface from the netif_list.
Calling sequence is whd_emac_wifi_link_state_changed() message post -> remove_etherent_interface() message post.
message processing order netif_link_irq(netif) -> delete_interface().
Since both the processing is handled in single thread, processing of message is handled sequentially.
5aa54b8e62 Merge pull request #127 from ARMmbed/sync_with_mbedos
6fe78412d2 Follow Mbed OS coding style
2b708be451 trace group defiined for shared_rng
d4c2caca41 more error handling added for ctr and hmac
cace1e9c22 Added missing optimizations based on mbedtls/baremetal.h config
2cc7442ba5 Added new global rng, needed for MbedTLS optimisations
f861157576 Prepare for upcoming MbedTLS changes
git-subtree-dir: features/nanostack/coap-service
git-subtree-split: 5aa54b8e622ec2b44bdf323cc02bd1cfc5ffd904
DISCO_F769NI EMAC driver may return ethernet packet with illegal
length when driver is under heavy load. In one case, the received
bytes indicate frame length of 53 bytes but advertised data length
was 65518 bytes. In another case EMAC driver variable
`EthHandle.RxFrameInfos.length` contained value 0xFFFF FFFC.
As a work-around accept only 1-1500 bytes long ethernet packets.
This assert in WhdSTAInterface.cpp causes rssi greentea test to fail
on Cypress parts. This is because the rssi GT test expects the negative
test case to return 0 and not assert.
- Remove wounding for the hardware CRYPTO block. The PSoC 6 MPN CYW9P62S1_43012EVB_01 was revised
to add the hardware crypto block.
- Add missing error checks for emac power up.
- Add a multiplied by 2 in the SDIO clock divider calculation to account for internal UDB divider.
Note: Fixes issues with intermittent WiFi firmware load failures on CY8CKIT_062_WIFI_BT,
CYW943012P6EVB_01, CYW9P62S1_43012EVB_01, CYW9P62S1_43438EVB_01.
In some cases, it is possible that every erase unit in area 0
has the same size, but they are still different than in area 1.
Remove the flag for varying erase sizes and instead check from
flash, what is the erase size of the current unit.
DISCO_F769NI EMAC driver may return ethernet packet with illegal
length when driver is under heavy load. In one case, the received
bytes indicate frame length of 53 bytes but advertised data length
was 65518 bytes. In another case EMAC driver variable
`EthHandle.RxFrameInfos.length` contained value 0xFFFF FFFC.
As a work-around accept only 1-1500 bytes long ethernet packets.
Replaced a hardcoded timeout in CyH4TransportDriver.cpp with a cypress
hal function. The cypress PUTC hal API only blocks until data has been
send into the HW buffer, not until all data has been out of the HW
buffer. Modified an API to block untill all tx transmit is complete.
This allows the removal of a hardcoded timeout in
CyH4TransportDriver.cpp that waits for data int the HW buffer to be
sent.
Previously Greentea tests was not initialising its storage
before asking for bd->get_program_size(), causing FlashBlockDevice to
return zero. This caused both TDBStorage's to use zero for both
parameter to SlicingBlockDevice(bd, 0, 0), effetivaly both then
used same addresses for slice. This caused SecureStore tests
to fail, because writes to internal RBP storage overwrote keys
from external storage.
Fine-tune TDBStore sizes, so that all tests can fit into storage.
At least with LPC55S69's default TDBStore configuration it's
impossible to run storage Greentea tests without exhausting the
memory reserved for storing keys.
Fixes an issue where number of keys were removed based on number of
threads which didn't have anything to do with the test case.
Fixes an issue where number of keys were assumed to be constant
but variable number was used for configuration.
In case our are contains data from previous reset() or reset_area(),
we might end up in the situation where free space contains valid
key headers, but we have not erased that area yet. This can cause
failures if the deinit() and init() because new scan of that area
would continue as long as keys are found. This causes keys on the
not-yet-erased area to be included in the new instance of TDBStore.
To prevent this failure, check after each key-write that our free
space does not contain valid key headers. Also make sure that we
erase one program unit sector over the master record. If we erased
just the master record,first key might is still there, causing next
init() to find it. Extend erase area by one program unit, so that
build_ram_table() won't find any keys.
With tickless mechanism hsem can be used for quite a long time
(time to set up PLL clock).
Also, if hsem is held to long, then this is not the current core which is faulty,
but probably the other (the one which hold the HSEM)
Added support to Wi-SUN tasklet for following mbed-mesh-api .json configuration options:
wisun-uc-channel-function
wisun-bc-channel-function
wisun-uc-fixed-channel
wisun-bc-fixed-channel
wisun-bc-interval
wisun-bc-dwell-interval
wisun-uc-dwell-interval
This allows e.g. enabling single channel configuration for testing.
This pull request does not change existing functionality since when
defaults from mbed-mesh-api .json are used, no new or changed
ws_management_* interface calls are made.
Remove lwIP reliant networking and BLE tests for baremetal
Mbed OS 5 ported lwIP in its OS mode and uses threads. Networking
that rely on lwIP needs to be removed so it can be compiled with the
baremetal profile.
The BLE cordio Greentea tests are also disabled given that the feature
is not supported without an RTOS.
MBED_DEPRECATE macros is added to string-based APIs.
New, non-string-based APIs are added in their place.
Wiced binaries rebuilt
Any existing stubs or mocks are adjusted to compile and run with the newly added non-string based functions.
Previously it was 2 pages - 1kB - which isn't sufficient to store
Reserved Area and Master Record. Reserved are requires one page and Master
Record takes two pages. With 512B page size and having two areas, active and
inactive, the minimum size requirement becomes 2 areas * 3 pages = 3kB. That
isn't enough to store any keys though.
Cypress Target update to support WiFi Manufacturing Test
Adding IOCTLS in WhdSTAInterface for MFG Test.
Fix WHD EMAC interface to release buffer when emac is not powered up or callback
is not registered.
As per 3GPP TS 24.301:
If the UE supports NB-S1 mode, Non-IP PDN type, or N1 mode,
then the UE shall support the extended protocol configuration options IE.
...
If the UE supports the extended protocol configuration options IE,
then the UE shall set the ePCO bit to extended protocol configuration options supported
in the UE network capability IE of the ATTACH REQUEST message.
Arto Kinnunen
Debdeep Saha
Mika Leppänen
fred.li
Anna Bridge
cyliangtw
Felipe
Mika Tervonen
Martin Kojtal
Darryl Green
Devaraj Ranganna
Kimmo Vaisanen
Juha Heiskanen
Kevin Bracey
Teemu Takaluoma
Antti Yli-Tokola
Lingkai Dong
Arun S
Kyle Kearney
midd
Jaeden Amero
Ryan Morse
Dustin Crossman
Antti Kauppila
Teppo Järvelin
Jarno Lamsa
Mahesh Mahadevan
Pawel Zarembski
PARKJIHOON
Andrew Chong
Risto Huhtala
Shuopeng Deng
Ari Parkkila
jeromecoutant
Przemyslaw Stekiel
Hamza Rizwan
Seppo Takalo
Veijo Pesonen
Michal Paszta
Alexandre Bourdiol
Adrien CABARBAYE
Hugues Kamba
Balaji Subramanyam