Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
Scancode found missing license notices in our source files. This commit
addresses those issues by adding an Apache-2.0 notice to source files
highlighted.
Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.
To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.
Fixes#10319
Mbed OS depends on TF-M to implement PSA. Any targets that need to
provide PSA must be supported by TF-M. The following targets are removed
from Mbed OS as they don't yet have TF-M support. We can re-add these
targets to Mbed OS when they have TF-M support in the official upstream
TF-M repository hosted at trustedfirmware.org.
These PSA targets no longer have a PSA implementation and are removed:
- LPC55S69
- LPC55S69_NS
- LPC55S69_S
- NU_PFM_M2351_NS
- NU_PFM_M2351_S
- HANI_IOT
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
For the application(firmware) booted by bootloader(OTA),
the image doesn't need the "flash_config" and "ivt" header.
So update the link file to support both kinds of application
(firmware) booted by bootROM and bootloader.
In default, the compilation will get the image with
"flash_config" and "ivt" header, for example the bootloader
compiling.
When compiling the OTA application image, please add the
line as below in the mbed_app.json file.
"target.macros_add" : ["MBED_APP_COMPILE"]
This will remove the "flash_config" and "ivt" header in the
final image.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
Update the flash driver to support both Hyper Flash
and QSPI Flash.
In addition, the static function cannot be linked to
SRAM even defined by AT_QUICKACCESS_SECTION_CODE macro.
So remove all "static" modifier for the FLASHIAP
functions.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
The memset function from c library will be linked in flash
space, it's risk for FLASHIAP. So I wrote flexspi_memset
to replace the memset for IMX FLASHIAP, and put the function
into targets/.../TARGET_IMX/flash_api.c file. All IMX Soc
platforms can declare it as extern and use in their Soc
flexspi driver files.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
The flash access may fail when implementing flash
initialization. So there is risk for interrupt handler
which linked in flash space.
Add the critical section to avoid the risk.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
NXP MIMXRT1050 EVK can support Hyper Flash or QSPI Flash with
small hardware reworks. Modify the XIP file to support boot
from the two kinds of Flash device. The Hyper Flash should be
the default device and defined in tartgets.json with the macro
"HYPERFLASH_BOOT". To select the QSPI Flash, just remove the
macro with the below line in any overriding json file.
"target.macros_remove" : ["HYPERFLASH_BOOT"]
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
Static pinmap extension required to use pin_function() and pin_mode() functions instead of pinmap_pinout(). Unfortunatelly pin_function() does not allow passing NC pin.
Call pin_function() and pin_mode() only if MISO/MOSI pin is not NC.
1. Do not disable and enable osillators during deep sleep
entry and exit
2. Increase the deep sleep to pass tests
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add a "used" attribute to hyperflash_config/image_vector_table to fix ARMC6 build with
the "-flto" flag.
(Error: L6236E: No section matches selector - no section to be FIRST/LAST. )
This attribute, attached to a function/variable, means that code must be emitted
for the function even if it appears that the function is not referenced.
Hugues Kamba
Harrison Mutai
Martin Kojtal
Jaeden Amero
talorion
Mahesh Mahadevan
Devaraj Ranganna
Gavin Liu
Przemyslaw Stekiel
Filip Jagodzinski
Maciej Bocianski
Pawel Zarembski
Tymoteusz Bloch