issue: #19095,#29655,#31718
- Change `ListWithPrefix` to `WalkWithPrefix` of OOS into a pipeline
mode.
- File garbage collection is performed in other goroutine.
- Segment Index Recycle clean index file too.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
`applyDelete` used to be serial for delete entries on each segments.
This PR make it work in parallel with errgroup to improve performance
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30361
- Delete may be lost when segment is not data-loaded status in lru
cache. skip filtering to fix it.
- `stats_` and `variable_fields_avg_size_` should be reset when
`ReleaseData`
- Remove repeat load delta log operation in lru.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
fix https://github.com/milvus-io/milvus/issues/32059
this pr fix two issues:
offset is not handled correctly without specify a limit
reduceStopForBest doesn't guarantee to return limit result even if there
are more result when there is small segment
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
issue: #31479#31797
milvus will add released segment to excluded info, and filter out it's
stream data in filter_node. but for data buffered in insert_node's
channel, if it belongs to growing segment which already be released,
then it will all the growing segment back again.
This PR maintain `excluded segments` in delegator, and check excluded
segment before new growing segment.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
related: #31959
1. reset segment index status after evicting to lazyload=true
2. reset num_rows to null_opt
Signed-off-by: MrPresent-Han <chun.han@zilliz.com>
issue: #31468
1. when segment's version in leader view doesn't match segment's version
in dist, should update leader view
2. after call loadDeltalog, should update segment's load version with
latest ts
3. change leader task's priority from high to low, to avoid leader task
replace segment task and balance task
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Related to #27349
See also #30816
Level zero is not allowed to balance among delegators, they shall always
serve current delegator. This PR releases all level zero segments after
channel is unsubscribed and preventing level zero segment blocking
graceful stop.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
"-1" as `InvalidPartitionID` previously used as All partition place
holder in delete cases. It's confusing and hard to maintain when a const
var has more than one meaning.
This PR add `AllPartitionsID` to replace these usages in delete
scenarios.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
use retry.handle when request is not able to service but don't throw
unrecoverable erros
fix#31323
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
/kind improvement
fix: #31272
This pr add more metrics, which are:
- Slow query count, which the duration considered as slow can be
configurable;
- Number of deleted entities;
- Number of entities imported;
- Number of entities per collection;
- Number of loaded entities per collection;
- Number of indexed entities;
- Number of indexed entities, per collection, per index and whether it's
a vetor index;
- Quota states (LongTimeTickDelay, MemoryExhuasted, DiskQuotaExhuasted)
per database;
---------
Signed-off-by: longjiquan <jiquan.long@zilliz.com>
issue: #30931
- move resource estimate function outside from segment loader.
- add load info and collection to base segment.
- add resource usage method for sealed segment.
Signed-off-by: chyezh <chyezh@outlook.com>
See also #31289
This PR:
- Set collection level `QueryNodeEntitiesSize` to zero if all segment
released
- Delete `QueryNodeEntitiesSize` metrics value after collection ref is
zero
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
add sparse float vector support to different milvus components,
including proxy, data node to receive and write sparse float vectors to
binlog, query node to handle search requests, index node to build index
for sparse float column, etc.
https://github.com/milvus-io/milvus/issues/29419
---------
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
issue: #31109
This PR remove duplicate target node id check, due to server id has
already been checked in rpc's interceptor
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
This PR add metrics for load segment progress:
1. add metrics for load segment/index concurrency
2. add metrics for load index latency
3. change load segment latency's time unit to ms
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #31125
Delegator shall build level zero delete cache from l0 segments belongs
to it. Previously it build cache from all existing level zero segments
in the querynode which may lead to high memory usage and even panicking
when pk types are not matched
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Segment load memory usage is underestimated due to removing the load
memroy factor. This PR adds it back to protect querynode OOM during some
extreme memory cases.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30950
due to segment version doesn't update as expected.
This PR will update segment version until segment become loaded
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
1. add coordinator graceful stop timeout to 5s
2. change the order of datacoord component while stop
3. change querynode grace stop timeout to 900s, and we should
potentially change this to 600s when graceful stop is smooth
issue: #30310
also see pr: #30306
---------
Signed-off-by: chyezh <chyezh@outlook.com>
if check in Segcore, will not do the it when not insert data.
so, check "radius" and "range_filter" in proxy.
related with #30365
Signed-off-by: lixinguo <xinguo.li@zilliz.com>
Co-authored-by: lixinguo <xinguo.li@zilliz.com>
See also #30756
This PR:
- Request disk resource when index type, version loaded with disk
- Add attribute cache for index utility
- Add `typeutil.Pair`
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #30191
It turned out that in auto id and batch delete scenario actual memory
size of deltalog maybe way larger than deltalog file size. This PR add a
configurable expansion rate for deltalog memory usage to prevent
out-of-memory panicking during loading deltalogs.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
the old version Knowhere would copy the index data while loading, we
need to consider this to avoid OOM.
Knowhere provides a util function to indicate whether it will load the
index with disk, if not, we need to double the memory usage prediction
for index data
Signed-off-by: yah01 <yang.cen@zilliz.com>
Related to #30191
When loading segment, segment loader shall check memory usage for
current loading task. Previously l0 segment was ignored but level zero
segment may actually cost lots of memory.
This PR adds back memory resource check for Level zero segment loading.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
according to our benchmark, concurrency level 16 is enough to fully
utilize the object storage network bandwidth
Signed-off-by: yah01 <yang.cen@zilliz.com>
issue: #30102#30225
we should read MetricType from SearchResult,
because query node never
1. read metricType from LoadMeta
2. store to collection
3. set SearchRequest.MetricType
Signed-off-by: PowderLi <min.li@zilliz.com>
See also #30273
This PR:
- Rename confusing `LoadIndexInfo` to `UpdateIndexInfo` for LocalSegment
- Use `DynamicPool` instead of `LoadPool` for `UpdateSealedSegmentIndex`
- Fix cgo call missing pool control
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Allows proactive warming up of chunk cache. Original vector data will be
asynchronously loaded into the chunk cache during the load process. It
has the potential to significantly reduce query/search latency for a
certain duration after the load, albeit with a concurrent increase in
disk usage.
issue: https://github.com/milvus-io/milvus/issues/30181
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
don't store logPath in meta to reduce memory, when service get
segmentinfo, generate logpath from logid.
#28885
Signed-off-by: lixinguo <xinguo.li@zilliz.com>
Co-authored-by: lixinguo <xinguo.li@zilliz.com>
this avoids a corner case: after load index failed, this index can be
never loaded as it has been added into the segment's index map
Signed-off-by: yah01 <yang.cen@zilliz.com>
Delete detail log will be large and hard to read when log level is
debug. This PR change the log to stringer and print only pk range,
number.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #29803
This PR:
- Add trace span for `LoadIndex` & `LoadFieldData` in segment loader
- Add `TraceCtx` parameter for `Index.Load` in segcore
- Add span for ReadFiles & Engine Load for Memory/Disk Vector index
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
the growing segments contribute to this metric while inserting and
putting into the manager, but the current impl inserts data before
putting the segments into manager, which leads to double contributions
fix: #29766
Signed-off-by: yah01 <yah2er0ne@outlook.com>
When the TimeTravel functionality was previously removed, it
inadvertently affected the MVCC functionality within the system. This PR
aims to reintroduce the internal MVCC functionality as follows:
1. Add MvccTimestamp to the requests of Search/Query and the results of
Search internally.
2. When the delegator receives a Query/Search request and there is no
MVCC timestamp set in the request, set the delegator's current tsafe as
the MVCC timestamp of the request. If the request already has an MVCC
timestamp, do not modify it.
3. When the Proxy handles Search and triggers the second phase ReQuery,
divide the ReQuery into different shards and pass the MVCC timestamp to
the corresponding Query requests.
issue: #29656
Signed-off-by: zhenshan.cao <zhenshan.cao@zilliz.com>
See also #27349
The segment level label in querynode used `Legacy` before segment level
was correctly passed in Load request. Now this attribute is still using
legacy so the metrics does not look right.
This PR add paramter for `NewSegment` and passes corrent values for each
invocation.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
This pr will make milvus load delta logs concurrently, which should
decrease the latency of loading a segment.
/kind improvement
---------
Signed-off-by: longjiquan <jiquan.long@zilliz.com>
related: #25324
Search GroupBy function, used to aggregate result entities based on a
specific scalar column.
several points to mention:
1. Temporarliy, the whole groupby is implemented separated from
iterative expr framework **for the first period**
2. In the long term, the groupBy operation will be incorporated into the
iterative expr framework:https://github.com/milvus-io/milvus/pull/28166
3. This pr includes some unrelated mocked interface regarding alterIndex
due to some unworth-to-mention reasons. All these un-associated content
will be removed before the final pr is merged. This version of pr is
only for review
4. All other related details were commented in the files comparison
Signed-off-by: MrPresent-Han <chun.han@zilliz.com>
See also #29625
This PR:
- Add a new implemention of `DeleteBuffer`: listDeleteBuffer
- holds cacheBlock slice
- `Put` method append new delete data into last block
- when a block is full, append a new block into the list
- Add `TryDiscard` method for `DeleteBuffer` interface
- For doubleCacheBuffer, do nothing
- For listDeleteBuffer, try to evict "old" blocks, which are blocks
before the first block whose start ts is behind provided ts
- Add checkpoint field for `UpdateVersion` sync action, which shall be
used to discard old cache delete block
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #29526
Previous PR removed flushed segment info from request, which causes
pipeline failing to exclude flushed segment info
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #27515
When Delegator processes delete data, it forwards delete data with only
segment id specified. When two segments has same segment id but one is
growing and the other is sealed, the delete will be applied to both
segments which causes delete data out of order when concurrent load
segment occurs.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue:https://github.com/milvus-io/milvus/issues/29230
this pr do two things about cagra index:
a.milvus yaml config support gpu memory settings
b.add cagra-params check
Signed-off-by: cqy123456 <qianya.cheng@zilliz.com>
Co-authored-by: yusheng.ma <yusheng.ma@zilliz.com>
the mmap mode isn't controlled by the config anymore, so we don't
require user to set it when they enabled mmap mode.
Signed-off-by: yah01 <yah2er0ne@outlook.com>
support enable/disable mmap for index, the user could alter the index's
mode by `AlterIndex` method
related: https://github.com/milvus-io/milvus/issues/21866
---------
Signed-off-by: yah01 <yah2er0ne@outlook.com>
Signed-off-by: yah01 <yang.cen@zilliz.com>
See also #29332
The segment may be released before or during the request when delegator
tries to forward delete request to yet. Currently, these two situation
returns different error code.
In this particular case, `ErrSegmentNotLoaded` and `ErrSegmentNotFound`
shall both be ignored preventing return search service unavailable by
mistake.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
many growing segments may be created in a short time and there is no
restriction to the process, the CGO call will leave many threads
related: #29282
Signed-off-by: yah01 <yah2er0ne@outlook.com>
congqixia
Bingyi Sun
Chun Han
wei liu
chyezh
Jiquan Long
yihao.dai
Cai Yudong
Gao
SimFG
Xiaofan
aoiasd
zhenshan.cao
jaime
cqy123456
John
Ted Xu
groot
Buqian Zheng
zhagnlu
smellthemoon
yah01
yiwangdr
xige-16
PowderLi
chyezh
Xu Tong
yah01