3.5 KiB
| layout | title |
|---|---|
| documentation | JWZH-O-2015-14 - ZWave |
{% include base.html %}
JWZH-O-2015-14 Gas Water Valve Controller
This describes the Z-Wave device JWZH-O-2015-14, manufactured by Shenzhen iSurpass Technology Co. ,Ltd with the thing type UID of isurpass_jwzho201514_00_000.
The device is in the category of Valve, defining Valves used to control water or gas. e.g. a flow stop valve..
The JWZH-O-2015-14 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
Valve controller with on/off operation. Can be mounted on various valve handles (water, gas or other) for remote control.
Specifications:
- Power Voltage : DC12V/1A
- Communication Technology : Z-WAVE PLUS EU868.42MHz
- Wireless Distance(Outdoor) : 30 Meters
- Valve Pressure : 1.6MPa
- Time Off Valve Auto : 5~10 sencod
- Time Off Valve Electric : 5~10 sencod
- Torque : 30~60 Kg.cm
Inclusion Information
With controller in inclusion mode, triple click the button within 1 second on the valve.
Exclusion Information
With controller in exclusion mode, triple click the button within 1 second on the valve.
Channels
The following table summarises the channels available for the JWZH-O-2015-14 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
Switch
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Device Configuration
The device has no configuration parameters defined.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The JWZH-O-2015-14 supports 1 association group.
Group 1: Lifeline
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 1 node.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | |
| COMMAND_CLASS_SECURITY_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.