3.3 KiB
| layout | title |
|---|---|
| documentation | VRI06 - ZWave |
{% include base.html %}
VRI06 Incandescent Scene Capable Dimmer
This describes the Z-Wave device VRI06, manufactured by Leviton with the thing type UID of leviton_vri06_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The VRI06 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
- Leviton Vizia+ VRI06-1LZ - 600W Max. - Incandescent Scene Capable Dimmer w/Radio Frequency
- Single Pole / 3-Way / Multi-Location - Features LED Locator and Brightness Display - Push Pad Switch - White/Ivory/Light Almond - 120 Volt
Inclusion Information
- Install VRI06
- Place controller in inclusion mode
- Press paddle on VRI06 to turn on/off light
Exclusion Information
- Place controller in exclusion mode
- Press paddle on VRI06 to turn on/off light
Channels
The following table summarises the channels available for the VRI06 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Scene Number | scene_number | scene_number | Number |
Dimmer
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Scene Number
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
Device Configuration
The device has no configuration parameters defined.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The VRI06 supports 1 association group.
Group 1: Group 1
Association group 1 supports 232 nodes.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1 | |
| COMMAND_CLASS_SCHEDULE_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_NODE_NAMING_V1 | |
| COMMAND_CLASS_HAIL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_MANUFACTURER_PROPRIETARY_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.