---
layout: documentation
title: VRI06 - ZWave
---

{% include base.html %}

# VRI06 Incandescent Scene Capable Dimmer
This describes the Z-Wave device *VRI06*, manufactured by *Leviton* with the thing type UID of ```leviton_vri06_00_000```.

The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

![VRI06 product image](https://opensmarthouse.org/zwavedatabase/194/image/)


The VRI06 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

  * Leviton Vizia+ VRI06-1LZ - 600W Max. - Incandescent Scene Capable Dimmer w/Radio Frequency
  * Single Pole / 3-Way / Multi-Location - Features LED Locator and Brightness Display - Push Pad Switch - White/Ivory/Light Almond - 120 Volt

### Inclusion Information

  1. Install VRI06
  2. Place controller in inclusion mode
  3. Press paddle on VRI06 to turn on/off light

### Exclusion Information

  1. Place controller in exclusion mode
  2. Press paddle on VRI06 to turn on/off light

## Channels

The following table summarises the channels available for the VRI06 -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer | 
| Scene Number | scene_number | scene_number |  | Number | 

### Dimmer
The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel is of type ```switch_dimmer``` and supports the ```Dimmer``` item and is in the ```DimmableLight``` category.

### Scene Number
Triggers when a scene button is pressed.

The ```scene_number``` channel is of type ```scene_number``` and supports the ```Number``` item.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The VRI06 supports 1 association group.

### Group 1: Group 1


Association group 1 supports 232 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_SCENE_ACTIVATION_V1| |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1| |
| COMMAND_CLASS_SCHEDULE_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_NODE_NAMING_V1| |
| COMMAND_CLASS_HAIL_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |
| COMMAND_CLASS_MANUFACTURER_PROPRIETARY_V1| |

### Documentation Links

* [Spec Sheet](https://opensmarthouse.org/zwavedatabase/194/reference/ViziaRF--Dimmer-Spec-Sht.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/194).