OpenHAB
/
openhab-docs
mirror of https://github.com/openhab/openhab-docs.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
openhab-docs/_addons_bindings/zwave/doc/ge/34127zw5304_0_0.md

7.1 KiB
Raw Permalink Blame History

layout title
documentation 34127/ZW5304 - ZWave

{% include base.html %}

34127/ZW5304 Solo Scene Remote

This describes the Z-Wave device 34127/ZW5304, manufactured by Jasco Products with the thing type UID of ge_34127zw5304_00_000.

The device is in the category of Remote Control, defining Any portable or hand-held device that controls the status of something, e.g. remote control, keyfob etc..

34127/ZW5304 product image

The 34127/ZW5304 does not permanently listen for messages sent from the controller - it will periodically wake up automatically to check if the controller has messages to send, but will sleep most of the time to conserve battery life. Refer to the Wakeup Information section below for further information.

Overview

No Hub Necessary – The remote allows you to create one scene to control smart devices with or without a Z-Wave hub. It is able to directly pair with Z-Wave switches, dimmers, fan controls and more simple-setup home automation. Dual- and quad-scene models – 34174 and 34176 – are also available for even more varied automation.

Scalable Automation – One-to-many or many-to-one configurations accommodate any need. Create a scene for up to 20 devices with one remote or use several remotes to control a single fixture. Universal compatibility allows the remote to pair with Z-Wave Plus and all previous Z-Wave generations.

Ideal Applications – Trigger actions of several devices to enjoy the comfort of knowing all of your lights are turned off when you leave the house or illuminate your whole home as soon as you arrive. Connecting multiple remotes to one fixture, lamp or fan instantly creates a multi-switch network for control from various locations.

Versatile Placement– Compact construction and two provided CR2032 batteries offer comfortable handheld operation for easy portability. The included unique magnetic adapter and rocker-style wallplate support wall-mount options. The remote can also be incorporated into existing switchboxes and multi-gang setups or replace blanks. Tabletop placement with an available cradle – model 39943 – allows convenient accessibility anywhere.

Full-Range Dimmability – When connected to a Z-Wave dimmer, adjust brightness levels of dimmable lights from 0-100 percent. Dimming lights reduces energy costs and improves bulb life.

Inclusion Information

  1. Press and hold the Up and Down buttons for 5 seconds. The LED will slowly flash.

  2. Press and hold the Up button 3 seconds. The LED will rapidly flash.

  3. Press the Down button to set the device as a receiver. The LED will flash every

second. If network transfer was successful, the LED will turn on for two seconds

Exclusion Information

  1. Press and hold the Up and Down buttons for 3 seconds. The LED will slowly flash.

  2. Press and hold the Up and Down buttons for 3 seconds. The LED will quickly flash for 20 seconds.

3. Press the manual/program button on the Z-Wave module/switch to remove it from the network. The LED will turn on for two seconds.

Wakeup Information

The 34127/ZW5304 does not permanently listen for messages sent from the controller - it will periodically wake up automatically to check if the controller has messages to send, but will sleep most of the time to conserve battery life. The wakeup period can be configured in the user interface - it is advisable not to make this too short as it will impact battery life - a reasonable compromise is 1 hour.

The wakeup period does not impact the devices ability to report events or sensor data. The device can be manually woken with a button press on the device as described below - note that triggering a device to send an event is not the same as a wakeup notification, and this will not allow the controller to communicate with the device.

  1. Press and hold the Up and Down buttons for 3 seconds. The LED will slowly flash.

  2. Press and hold the Down button for 2 seconds. The LED will quickly flash.

  3. Press the Up button. The LED will turn on for two seconds. If the setup is successful, the keypad will stay awake for 30 seconds. During awake mode, the controller will sleep again within two seconds after any button is pressed

General Usage Information

Channels

The following table summarises the channels available for the 34127/ZW5304 -:

Channel Name Channel ID Channel Type Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Battery Level battery-level system.battery_level Battery Number

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The system.battery-level channel is of type system.battery-level and supports the Number item and is in the Battery category. This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.

Device Configuration

The device has no configuration parameters defined.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The 34127/ZW5304 supports 1 association group.

Group 1: Lifeline

The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.

Association group 1 supports 1 node.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_CONTROLLER_REPLICATION_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V1
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_ZWAVEPLUS_INFO_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1
COMMAND_CLASS_BATTERY_V1
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_VERSION_V2

Documentation Links

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.