| .. |
|
TARGET_BLUEPILL_F103C8
|
Target_STM:_sbrk updated to use limits from linker files no need to set defines
|
2019-02-19 15:49:49 -06:00 |
|
TARGET_DISCO_F100RB
|
Guard RAM start and size defines
|
2019-02-28 19:54:38 -06:00 |
|
TARGET_NUCLEO_F103RB
|
Guard RAM start and size defines
|
2019-02-28 19:54:38 -06:00 |
|
device
|
STM32 WATCHDOG : increase timeout value
|
2019-05-24 11:35:42 +02:00 |
|
analogin_device.c
|
STM32 ADC INTERNAL CHANNEL reset after read
|
2019-03-29 14:30:49 +01:00 |
|
can_device.h
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2018-12-20 20:02:29 +11:00 |
|
common_objects.h
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2018-12-20 20:02:29 +11:00 |
|
device.h
|
STM32: check for UART ongoing transfers before entering deepsleep
|
2018-08-07 11:30:53 +02:00 |
|
flash_api.c
|
Support erase value in Flash HAL drivers, FlashIAP and block devices
|
2018-11-07 14:23:07 +02:00 |
|
gpio_irq_device.c
|
STM32: move pin_lines_desc to c file
|
2017-02-16 19:34:11 +01:00 |
|
gpio_irq_device.h
|
STM32: move pin_lines_desc to c file
|
2017-02-16 19:34:11 +01:00 |
|
i2c_device.h
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2018-12-20 20:02:29 +11:00 |
|
pin_device.h
|
TARGET_STM32F1 astyle
|
2018-06-27 14:31:04 +02:00 |
|
pwmout_device.c
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2018-12-20 20:02:29 +11:00 |
|
pwmout_device.h
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2018-12-20 20:02:29 +11:00 |
|
serial_device.c
|
STM32 Serial Flow Control
|
2019-01-31 17:11:23 +01:00 |
|
spi_api.c
|
TARGET_STM32F1 astyle
|
2018-06-27 14:31:04 +02:00 |
|
spi_device.h
|
STM32 SPI specific mode for higher performance
|
2017-06-16 10:23:48 +02:00 |
570e9b0bf4