Currently, if all TX descriptors are in use and IP stack calls K64F/K66F
ethernet driver link out, link out drops the packet. Added 10ms delay
to link out to wait for a descriptor to become available before dropping
the packet.
Changed K64F/K66F power up to return without waiting for link up i.e. for
the ethernet cable to be connected. This is needed for non-blocking use
of driver e.g. for using the driver from event queue.
If the automatic uplink is sent directly the call-stack becomes larger than 1K
which may cause serious problems in debug builds. Just to have a respite between
RX and TX we queue an event for the automatic uplink rather than directly undergoing
an automatic uplink.
RX1 and 2 delays needed to be more precise and aggregate tx time was
drifiting because of timing difference between actual tx interrupt and
our processing of that interrupt ever so slightly.
We now take a timestamp of the tx interrupt and take a time diff while
instantiating delay timers. The timestamp is then used to update the aggregate
tx time.
Two new methods are introduced in the LoRaMac class which provide current
timing and current receive slot. These functions are used by LoRaWANStack
for its processing.
Code was written using MBED_CONF_DEFAULT_* but the mbed_lib.json file
that created these values is prefixed with "nsapi" and therefore
final macros are MBED_CONF_NSAPI_DEFAULT_*
A peer device that sends a connection parameter update may get block if it doesn't receive a response.
This patch accept the peer request unconditionnally. At some point this event will be managed by the application.
Previously get_mac_address on a ThreadInterface returned the EUI-64
reported by the radio driver. This was required for commissioning, but
was inconsistent with other interfaces, and the API concept.
5.9.0 inadvertently changed this so that get_mac_address returned the
actual MAC address used by the radio, which is a hash result of the
EUI-64 for Thread.
The original "return the EUI-64" form was somewhat faulty, as
get_mac_address would not return the EUI-64 set by set_device_eui64() or
another mechanism before connect() was called.
Rather than revert to old behaviour, add a new API to get the device
EUI-64 to ThreadInterface, alongside the existing set API.
When all TX descriptors were reserved in a row so that TX buffer
reclaim interrupt did not happen during reservation sequence, after
the interrupt occurred, TX buffer reclaim did no longer free buffers.
This happened because when all descriptors were in use, last free
index pointed to consumed index.
LWIP stack is configured to be 1200 as default. Without debug enabled,
maximum stack size used for asynchronous DNS operations is 880 bytes. With
debug enabled maximum used stack size is 1248. Added configuration
to LWIP to increase stack size by 25 percent when debug is enabled on build.
Two cascading copy-paste errors stopped this working:
* PPPCellularInterface::get_gateway() called
nsapi_ppp_get_ip_address();
* nsapi_ppp_get_gateway() called the interface's get_netmask().
First bug has always been there - second one was introduced in 5.9.
AT_CellularNetwork currently lacks calls to get both netmask and gateway
- this patch would be needed for that when added.
Set correct SYSMPU register for proper USB operation. This bug was
introduced when the SYSMPU register names and defines were updated
in the commit:
"K64F: Updated the SYSMPU SDK driver"
93f8cfed05
If the value is an integer, the 4th bit is used for sign, so you can store
values upto 7 only whereas the datarate values could go upto 15. That's why
we need to turn this to an unsigned integer so that the last bit can also be used.
Travis astyle check pointed out some of the style mismatches in the code.
Not all of them are worth changing as they make the code unreadable and
some of them are semantically wrong.
So in this commit, we have attempted to pick the most important style
mismatches and rectify.
TX pointer array was using RX ring length in its declaration.
Wasted memory if RX ring > TX ring, as is the default, but would
be broken if RX ring < TX ring.
16 RX buffers and 8 TX buffers is probably excessive. Nanostack
version of driver successfully used 4+4, and data pump should be
broadly equivalent.
This means that switching K64F devices from Nanostack to EMAC increases
base heap usage by 18K - observed in Nanostack border router builds.
Add a config option to make it possible to lower the number of buffers.
Defer consideration of lowering the default to later.
Nanostack object constructor didn't actually initialise Nanostack.
Nanostack initialisation was deferred until an interface was actually
attached to the stack, which generally happened at first interface
connect.
Not normally a problem, unless you're trying to make direct Nanostack
setup calls prior to connect - some applications do this, and were
relying on ThreadInterface::initialise to do Nanostack
initialisation.
Unfortunately in 5.9 ThreadInterface::initialise no longer does
initialise Nanostack immediately, because the mesh interfaces were
aligned and integrated with the Ethernet interfaces, which did
initialisation on connect().
Make the Nanostack object constructor initialise Nanostack (as the LWIP
constructor does for lwIP), so calling Nanostack::get_instance() is the
5.9 API for Nanostack initialisation.
For future work, APIs like ns_file_system_set_root_path should be
exposed as methods of Nanostack, so everything happens with a single
Nanostack::get_instance().file_system_set_root_path().
DNS resolver now counts how many sendto operations are successful
during one DNS server attempt cycle (attempting to contact DNS
servers from 0 to last index, including stack specific ones). If all
socket sendto operations fail, DNS resolution is aborted.
If one or more are successful, DNS resolution is continued until
total network attempts count is reached or all sendto operations
fails during a cycle.
These settings control the range of functionality enabled in the softdevice as well as ram consumption.
In particular reducing these values is critical to enable usage of 16K nrf51 devices.
- Set network stack to store event queue so that mbed::mbed_event_queue() call
is not needed every time call_in() is called
- Added dns state variables and enum (states are: created, initiated and cancelled)
- Corrected DNS response handling so that if DNS server returns that host name is
unknown the DNS query is not tried again
- Reorder mutexes in nsapi_dns_query_multiple_async()
- Created nsapi_dns_query_async_initiate_next() function to initiate the next
DNS query from the queue after delete of previous query
- Added dsn_timer_running variable to supervise DNS timer start/stop
- Changed cancel function to only mark query as deleted and moved deletion
to timer function. This allows to run socket close on DNS thread
- Added new nsapi error NSAPI_ERROR_TIMEOUT for DNS (and other) timeouts
EMAC changes broke PPP glue - fix it up. In particular, PPP steals
the netif->state pointer, so we can't use it as a back pointer to
our LWIP::Interface.
There is a configuration problem with UBLOX_C027 cellular because of missing
LWIP memory configuration for the target.
Added configuration for LPC1768, LPC4088, LPC4088_DM targets and changed
NXP to more specific LPC546XX.
General stability improvements are performed.
A flag is added if a Class C RX2 window is open.
We shouldn't open it again if its already opened.
TX_CRYPTO_ERROR is renamed to CRYPTO_ERROR.
Keeping TX_CRYPTO_ERROR for backwards compatibility.
In Class C, rx timeout does not take place for RX2 windows, so if we have
not received anything, we would be retrying but if the no. of retries are
maxed out, and we have not recieved anything yet, we need a mechanism to
tell the upper layer that this has happened.
rx_abort() was sort of dead code as it was doing essentially nothing.
It might have actually meddled with the state machine if it was hit by
invoking on_ack_timeout_timer_event().
State machine and corresponding processors now take care of the ack timeout,
retries and all other bits, so we don't need abort_rx().
MCPS confirmation should be filled with the current number of retries
if the ack is not recieved for a CONFIRMED message.
Ack retry number needs to be incremented after the retry is made not before
that.
A few traces are added at the crucial junctions of the code just to tally with
the conceptual flow for debug purposes.
Application can use cancel_sending() API to stop any outstanding, outgoing
transmission (a TX which is not already queued for transmission). This can
potentially enable use cases where the application could cancel a transmission
and go to sleep if the backoff period is long enough rather than waiting for
the transmission to happen.
This API enables the application to get hold of remaining time after which
the transmission will take place. User can query the backoff time whenever
there is a packet in the TX pipe. If the event for the backoff expiry is
already queued, the stack does not provide backoff metadata.
An API is added to fetch any meta-data available after a succesful
transmission. The stack will make the meta data available after the
TX interrupt is processed. User can get the tx meta data after receiving
TX_DONE event.
Subtract 4 from the received packet length - the buffer contains the
CRC, which we shouldn't pass up.
Ensure we allocate receive buffers of a size corresponding to the
rounded-up size we tell the hardware - the hardware was overrunning the
allocation by a couple of bytes.
- Changed mutexes to platform mutexes
- Removed not needed null check from delete
- Changed nsapi_dns_call_in_set() to use call_in_callback_cb_t and
added prototype to header
- Serialized the sending of multiple async DNS queries since limits on event
message box sizes
- Added timer function that supervises the total time used to make DNS query
and triggers socket timeouts
- Changed nsapi_error_t to new nsapi_value_or_error_t on interface headers
- Corrected wording of gethostbyname_async return values
- Clarified .json options
- Added a new data type for socket callback that can be used from interrupts
- Corrected variable limits to use INT32_MAX etc. defines
- Changed mallocs to new
- Optimized variable sizes on DNS_QUERY definition
- Changed call_in/call methods of the stack to callback provided by the stack
- Specified what are limitations for operations that are made in callback
- Added pure virtual class DNS that defines DNS operations
- Added cancel operation and unique ID to DNS request used in cancel
- Added DNS configuration options to netsocket/mbed_lib.json for retries,
response wait time and cache size
- Changed host name to use dynamic memory in DNS query list and cache,
set maximum length for the name to 255 bytes.
- Added mutex to asynchronous DNS
- Reworked retries: there is now total retry count and a server specific count
- Ignores invalid incoming UDP socket messages (DNS header is not valid), and retries DNS query
- Reworked DNS module asynchronous operation functions
- Corrected other review issues (nothrow new, missing free, missing mutex unlock etc.)
- Added non-blocking DNS interface to network interface and
network stack.
- Added caching of DNS replies.
- Added a network stack function to get DNS addresses from stack.
- Added call and call_in hooks to onboard network stack to
allow calling functions from onboard stack context.
- Added support to call and call_in functions to LWIP and
Nanostack.
- Disabled LWIP DNS translator with the exception of DNS
address storage used in DNS address get.
Implementation of unified EMAC driver for Renesas mbed boards
Based on the driver so far, Renesas implemented the emac driver for GR-PEACH and VK-RZ/A1H.
The mainly changes is below.
- Add the connection part with LWIP according to the unified emac specification.
- Add three new multicast functions(add, remove, set_all).
The Greentea test netsocket and emac test passed.
Mika Leppänen
Hasnain Virk
Teppo Järvelin
Seppo Takalo
Vincent Coubard
David Saada
Kevin Bracey
Antti Yli-Tokola
Yoshihiro TSUBOI
paul-szczepanek-arm
Ari Parkkila
Russ Butler
Teemu Kultala
Amanda Butler
Kimmo Vaisanen
cyliangtw
Michael Schwarcz
Andrew Leech
Yossi Levy
Donatien Garnier
Mirela Chirica
Veijo Pesonen
Kari Haapalehto
Krzysztof Stachowiak
Oren Cohen
Oren Cohen
Ron Eldor
Martin Kojtal
Cruz Monrreal
Bartek Szatkowski
Danny Shavit
Senthil Ramakrishnan
Asif Rizwan
Mahesh Mahadevan
TomoYamanaka