Kevin Bracey
2135c8f368
NanostackInterface: Remove string round-trips
...
Older versions of SocketAddress required conversion via string - this is
no longer the case.
2016-10-31 10:20:24 +02:00
Kevin Bracey
b2834b9aa6
NanostackInterface: Allow binding to address
...
These days Nanostack does let you bind to an address - permit this.
(Remembering to check it is an IPv6 address).
2016-10-31 10:20:24 +02:00
Kevin Bracey
8e5391ab85
NanostackInterface: Check input address is IPv6
...
For the two calls that use the address - sendto and connect, check that it
actually is an IPv6 address.
2016-10-31 10:20:18 +02:00
Martin Jäger
eb95c14fa6
Fixing some typos
2016-10-30 16:49:49 +01:00
Christopher Haster
8b7c051d03
lwip - Change k64f emac layer to drop frames on buffer exhaustion
...
Previously, exhausting hardware buffers would begin blocking the lwip
thread. This patch changes the emac layer to simply drop ethernet
frames, leaving recovery up to a higher level protocol.
This is consistent with the behaviour of the emac layer when unable
to allocate dynamic memory.
2016-10-28 15:22:08 -05:00
Christopher Haster
42105371ef
lwip/nsapi - Cleaned up warnings in network code
...
- cc.h@57,1: "BYTE_ORDER" redefined
- lwip_inet_chksum.c@560,44: passing argument 1 of 'thumb2_checksum'
discards 'const' qualifier from pointer target type
- lwip_pbuf.c@1172,9: variable 'err' set but not used
- SocketAddress.cpp@293,1: control reaches end of non-void function
2016-10-28 14:24:52 -05:00
Mahadevan Mahesh
6750f488ed
Add K64F, K22F and KL43Z to travis build
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2016-10-28 12:12:35 -05:00
Mahadevan Mahesh
ef56b3d712
FAT tests: Add support for KL43Z
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2016-10-28 12:12:26 -05:00
Mahadevan Mahesh
046f3cdb26
Update USB driver for devices with Kinetis SDK support
...
1. Fix build issues with IAR and GCC toolchain
2. Update clock initialization code
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2016-10-28 11:47:20 -05:00
Christopher Haster
d8d2b0a41d
nsapi - Added better heuristic for the default record of DNS queries
...
Takes advantage of the get_ip_address function to predict the IP
address version wanted by the underlying interface. The should avoid
the need for most IPv6 interfaces to overload gethostbyname.
suggested by @kjbracey-arm
2016-10-28 11:41:33 -05:00
Anna Bridge
479e203dce
Switch off compilation of wifi example while awaiting a fix for
...
issue 3152 is submitted.
2016-10-28 16:10:41 +01:00
Peter Harliman Liem
b3e5c97244
Fix wrong index at LPC43xx tx end ring assignment
...
NUM_TX_FRAG should be used instead of NUM_RX_FRAG
2016-10-28 22:48:37 +08:00
Anna Bridge
c60b19e27c
Remove superfluous debugging line.
2016-10-28 15:20:36 +01:00
Martin Kojtal
c9f9ffa583
Merge pull request #3140 from bridadan/remove_getchar_greentea_client
...
[tests] Replacing getchar with RawSerial getc in greentea-client
2016-10-28 15:34:13 +02:00
cyliangtw
33cfe1f599
remove dead code in device.h of NUC472 & M453
2016-10-28 18:39:56 +08:00
Mika Leppänen
fae713e4d1
Added support for 6lowpan PAN ID filter to mbed mesh api configuration
2016-10-28 13:28:11 +03:00
Radhika
eaf7265aa6
User trim added.
...
Astyle and pylint run on code.
2016-10-28 15:02:52 +05:30
Martin Kojtal
4a4d09f6d1
Merge pull request #3074 from jamike/TARGET_STM_INIT_GCC_ALIGNEMENT
...
Target STM - init gcc alignement
2016-10-28 11:04:50 +02:00
Martin Kojtal
51fc2ce4a5
Merge pull request #3139 from bulislaw/arduino_ff
...
Handle [NOT_SUPPORTED] exception in make.py
2016-10-28 10:15:19 +02:00
Martin Kojtal
6eac2b008a
Merge pull request #3009 from pradeep-gr/master
...
TRNG enabled. TRNG APIs implemented. REV A/B/C/D flags removed. Warnings removed
2016-10-28 10:13:50 +02:00
Mahadevan Mahesh
1ac09d3a19
Add support for FRDM-K82F
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2016-10-27 11:27:24 -05:00
Marcus Chang
8876b7ef38
Removed static declaration for the StorageVolumeManager in the CFStore because this componenent is shared across all users of the flash. Added define guards to the CFStore location and size so that these can be changed from the settings file.
2016-10-27 10:26:28 +01:00
Martin Kojtal
f33088b7e4
Merge pull request #3142 from 0xc0170/fix_nuvoton_mbed2_removal
...
Targets- NUMAKER_PFM_NUC47216 remove mbed 2
2016-10-27 11:23:41 +02:00
Martin Kojtal
bd4eca325b
Merge pull request #3024 from jeromecoutant/PR_analog_loop
...
analog_loop tests update for STM32
2016-10-27 11:02:10 +02:00
Bartek Szatkowski
aa3a127c76
Handle [NOT_SUPPORTED] exception in make.py
...
That let us to ignore build failures for examples on not supported
platforms.
2016-10-27 09:45:55 +01:00
Michel Jaouen
4a69072161
INIT:GCC add call to HAL_Init
...
system_init, stops all on going timer.
gcc _start , perform zero initialized.
=> HAL_Init must be done again also in GCC toolchain
2016-10-27 10:40:28 +02:00
Michel Jaouen
b225a5ca97
STM32F1xx : GCC_ARM remove zero bss done at startup.
...
Zero bss is done after the call to _start.
2016-10-27 10:40:17 +02:00
Michel Jaouen
702f64a6f2
STM32F0xx: GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-27 10:40:02 +02:00
Michel Jaouen
9f20c4641d
STM32F0xx : GCC_ARM use a call to _start which performs
...
zero bss, C++ init and the call to main.
Remove direct call to __libc_init_array and main not needed
as _start is beeing called.
2016-10-27 10:39:02 +02:00
Michel Jaouen
af090e3e6e
STM32L0xx : GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-27 10:38:56 +02:00
Michel Jaouen
479a1a2715
STM32L1xx : GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-27 10:38:52 +02:00
Michel Jaouen
f3b1c0a0c8
STM32L1xx : GCC_ARM a call to _start which performs
...
zero bss, C++ init and the call to main.
Remove direct call to __libc_init_array and main not needed
as _start is beeing called.
2016-10-27 10:38:35 +02:00
0xc0170
8c4e6a42aa
Targets- NUMAKER_PFM_NUC47216 remove mbed 2
...
crypto failures due to mbedtls dependency
2016-10-27 10:36:28 +02:00
cyliangtw
6889c1368b
replace tab by 4 space char
2016-10-27 16:31:29 +08:00
Martin Kojtal
ba47aa546b
Merge pull request #2897 from geky/nsapi-consistent-unspec
...
nsapi - Standardize support of NSAPI_UNSPEC
2016-10-27 10:26:00 +02:00
Martin Kojtal
da377aa5d8
Merge pull request #3121 from monkiineko/master
...
STM32F3: Correct UART4 and UART5 defines when using DEVICE_SERIAL_ASYNCH
2016-10-27 10:12:13 +02:00
Martin Kojtal
b826d1bb1a
Merge pull request #3022 from hasnainvirk/ncs36510_fixes
...
OnSemi RAM usage fix
2016-10-27 10:04:31 +02:00
Martin Kojtal
c9c6428598
Merge pull request #3122 from SiliconLabs/SiliconLabs-cleanup-rebase
...
[Silicon Labs] Update of Silicon Labs HAL
2016-10-27 09:56:16 +02:00
Brian Daniels
7a8946ff24
Replacing getchar with RawSerial getc in greentea-client.
...
This change prevents the standard library from allocating a large buffer
on the heap. On GCC_ARM, this is a saving of 1K. On ARM, this is a saving
of 64 bytes.
2016-10-26 16:55:54 -05:00
Anna Bridge
a5d3d2056b
Update ble example meta data to fix unsupported compilation combinations.
...
Remove URI beacon example as this is no longer required.
Add specific set of supported targets.
2016-10-26 16:24:42 +01:00
Martin Kojtal
4198222c54
Merge pull request #3005 from c1728p9/build_profiles
...
New build profile and docs
2016-10-26 15:16:01 +02:00
Martin Kojtal
a7a53b7b6c
Merge pull request #3046 from mmorenobarm/master
...
[BEETLE] Update BLE stack on Beetle board
2016-10-26 15:08:55 +02:00
Martin Kojtal
53cd23e285
Merge pull request #3097 from theotherjimmy/pack-manager-urllib2
...
Arm-Pack-Manager Remove pycurl dependency
2016-10-26 14:48:05 +02:00
Martin Kojtal
8c2f874b40
Merge pull request #3093 from BrunoMPires/master
...
[SDFileSystem] Enable / Disable serial debug.
2016-10-26 14:46:30 +02:00
Michel Jaouen
a711ff360b
STM32F7xx : GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-26 14:42:47 +02:00
Michel Jaouen
93a0b9ce60
STM32L4xx : GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-26 14:42:24 +02:00
Michel Jaouen
ee22d0a054
STM32F4xx: GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-26 14:41:45 +02:00
Martin Kojtal
69a7481f26
Merge pull request #3085 from jeromecoutant/PR_LP_F303ZE
...
Add LOWPOWERTIMER capability for NUCLEO_F303ZE
2016-10-26 13:55:57 +02:00
Martin Kojtal
7499177a5b
Merge pull request #3076 from bcostm/fix_issue-2910_nucleo-f103rb
...
STM32F1: Correct timer master value reading
2016-10-26 13:55:29 +02:00
pradeep-gr
bb824c6f91
mbed-os-tests-mbedtls-selftest issue fixed
2016-10-26 16:49:29 +05:30