Enabled heap_and_stack test for baremetal.
Added a test to check that global variables are initialised.
In mbed_sdk_boot:
- Added initialisation for mbed_stack_isr_start/size and mbed_heap_start/size for all toolchains.
- ARM toolchain:
- Added call to mbed_toolchain_init() to initialise global variables.
- Moved microlib initialisation code from mbed_retarget.cpp to mbed_sdk_boot.c.
- IAR toolchain: there is no equivalent to a software init hook that can be called. __low_level_init() was used but since this function is called before RAM initialisation, it cannot be used to initialize global variables. Defined a new __mbed_init() function called from IAR startup file instead.
-Added "rtos-api" in TESTS/configs/baremetal.json
-some test case used thread_sleep_for instead Thisthread::sleep_for
-Added the EOF character
-Disable completely the non supported test cases
Change stack sizes in test stats_cpu and mbedmicro-rtos-mbed-threads.
The value 384 was declared to make this test pass on STM32F070RB,
but its main stack value has been changed to 3KB so now it passes
this test with 512 stack size. The change was needed to make GR_LYCHEE
pass this test on ARM compiler.
Time drifting test cases use serial communication with the host and are unstable on CI.
Skip time-drifting test cases if SKIP_TIME_DRIFT_TESTS macro is defined.
The idea for the future is to use FPGA test shield for timing tests instead of host scripts.
Also remove `__ARM_FM` macro which in most cases was used to disable time drifting tests. In other cases replace `__ARM_FM` with `TARGET_ARM_FM` which is more suitable.
Do not call sleep from the test thread, but let scheduler do it.
And also include the deep sleep latency in the computation of the allowed
delta for deep sleep test case.
Deprecate wait() in favour of acquire(), try_acquire(),
try_acquire_for() and try_acquire_until().
Brings Semaphore more into line with CMSIS-RTOS 2 (which uses "acquire"),
itself (as it has "release"), and other classes having "try", "try for"
and "try until".
Also steps away from vague "wait" term - the primary operation here is
to acquire the semaphore, and this will of course sleep.
due to partial implementation. Having FUTURE_SEQUANA_M0 and
FUTURE_SEQUANA PSA targets is misleading.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Added WiFi_Bt CM4 PSA target in mbedos json
Added SPE-NSPE mailbox initialization for CM4 SystemInit
Made similar to FUTURE_SEQUANA configurations
Copied FUTURE_SEQUANA CM0 SPM part for WiFi_Bt smoke test
Added CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Sorted files for new CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Copied files for CY8CKIT_062_WIFI_BT_M0_PSA from FUTURE_SEQUANA
Copied and updated cm0p start files
Corrected according to FUTURE_SEQUANA
Changes to M0 startup files to have SPM started
Fixed implicit declaration warning
Commented interrupts enabling according to FUTURE_SEQUANA flow
Updated prebuild spm_smore CM0 hex for CM4 target
Turned on greentea environment
Used special memory region for common CM0/CM4 data
Updated prebuild CM0 SPM hex
Placed shared memory region for flash operations into SPM shared memory region
Updated cyprotection code and configuration
Start address of protected regions is set by a defined number from target.json
Added masters pcMask configuration
Added support for PSA target to WIFI_BT board
Enabled resources protection for SPM
Aligned RAM usage according to Cypress FlashBoot and CyBootloader
alligned protection config
Added CYW943012P6EVB_01_M0 target
Enlarged heap size, remobed nv_seed
Added heap reservation in linker script from mbed-os
Removed heap size definition
turned on nv_seed config
Removed nv_seed macros
Enabled protection for PSoC6 CM0
Added PSoC6 CM0 PSA readme
Enabled mbed_hal-spm test
Enabled nv_seed and removed unneeded ipc config define
Added SPDX string to feature_ble cypress target files
Removed unneeded supported_toolchains lines for Cypress targets
Disabled protection settings
Corrected flash initialization for PSoC6 CM0 PSA
Changed PSoC6 IPC6 protection for flash
Enabled special flash initialization and enabled protection settings
Updated and added new prebuild PSoC6 CM0 PSA hex files
Disabled HW TRNG and CRC for PSoC6 CM4 PSA target
Added missing const to allow types to match
Updated PSoC6 WIFI_BT_PSA prebuilt directory
Moved PSoC6 shared section usage area definition to begin of ld
Added initial ARM_STD linker and startup files for PSoC6 CM0
Added initial IAR linker and startup files for PSoC6 CM0
Added defines to disable some SPM protection settings for PSoC64
Moved Flash function variables into separate memory region
Added defines for new Public area definition
Updated PSoC6 CM0_PSA hex-files
Use a busy loop with non-blocking Semaphore::wait(0) calls instead of a
single Semaphore::wait(osWaitForever) to improve time measurement
accuracy. Looping in Semaphore::wait(0) prevents the board from entering
sleep or deepsleep modes while waiting for the semaphore. By skipping
the overhead wakeup time, we get more accurate timings.
It will be too hard to try to intercept and continue from a trapped
error once error functions are marked [[noreturn]], so make the error
return tests conditional on error trapping being disabled.
Static Thread methods and signal methods have been deprecated. Remove
all references in the main code, and most of the tests. Some tests of
the deprecated APIs themselves remain.
Rajkumar Kanagaraj
Martin Kojtal
Evelyne Donnaes
Kevin Bracey
George Psimenos
int_szyk
Neil Tuttle
Anna Bridge
Przemyslaw Stekiel
Laurent Meunier
Devaraj Ranganna
Lingkai Dong
Deepika
Mahesh Mahadevan
Oleg Kapshii
Russ Butler
Filip Jagodzinski
Oren Cohen
Cruz Monrreal
Qinghao Shi