Instead of user defined symbols in assembly files or C files,
use linker scripts to add heap and stack - this is inconsistent
with ARM std linker scripts
When activating an endpoint assign new data rather than ORing
data to it. This ensures that values set from the previous use
do not effect the current configuration.
Update the patch "Create HAL_PCD_EP_Abort" to fix bugs.
This patch adds the low level functions USB_EPStopXfer, USB_EPSetNak,
USB_EPClearNak and the high level function HAL_PCD_EP_Abort so that
transfers can be stopped.
The functions USB_EPSetNak and USB_EPClearNak allow nak to be enabled
or disabled for an endpoint, preventing or allowing further transfers.
The function USB_EPStopXfer stops pending reads and writes started by
USB_EPStartXfer along with clearing and masking any interrupts enabled
by USB_EPStartXfer.
The function HAL_PCD_EP_Abort aborts any transfers on the given
endpoint. When this function completes the transfer interrupt
is guarenteed not to fire for this endpoint. Furthermore, the size
of data transferred during an aborted read can be found by calling
the function HAL_PCD_EP_GetRxCount.
Other notes on this Change:
1.
Prior to this patch the interrupt USB_OTG_DOEPINT_EPDISD was not
handled. When an OUT endpoint was disabled this interrupt occurred
causing the CPU to get stuck repeatedly handling this interrupt. This
is because this interrupt was unmasked but nothing cleared this
interrupt. This patch also adds code to handle and clear this
interrupt to prevent a lockup.
2.
Stopping a transfer on an OUT endpoint requires global nak OUT to
be in effect. Even with this being done, having entries in the rx fifo
prevented an OUT endpoint from being disabled. This behavior is not
mentioned in the Reference Manual.
The DEVICE_FOO macros are always defined (either 0 or 1).
This patch replaces any instances of a define check on a DEVICE_FOO
macro with value test instead.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files should strictly align to 8-byte boundary
As suggested by Russ Butler in mbed-os issue #7328, and until there is an
implementation of mbed-os issue #4408, we are implementing a workaround
at HAL level to check if there is any ongoing serial transfer (which happens
if HW FIFO is not yet empty).
In case a transfer is ongoing, we're not entering deep sleep and
return immediately.
In serial_tx_active and serial_rx_active functions,
we check the internal state value with
HAL_UART_STATE_BUSY_TX = 0x21U,
HAL_UART_STATE_BUSY_RX = 0x22U,
It seems that value can also be :
HAL_UART_STATE_BUSY_TX_RX = 0x23U,
Martin Kojtal
Laurent Meunier
Yuan Cao
Alexandre Bourdiol
Vincent Veron
jeromecoutant
deepikabhavnani
Cruz Monrreal
Russ Butler
Russ Butler
Michel Jaouen
Marcin Tomczyk
Przemyslaw Stekiel
Alastair D'Silva
David Saada
Juho Eskeli
bcostm