The ADC range was previously 0-VBGR*2 (0 - 2.4 V). Change the reference
so that the ADC range is 0 - VDDA, to bring it in line with the documented
behavior of the mbed hal.
This target uses the QSPI interface hardware in XIP mode to allow
memory-mapped access to the WiFi interface firmware. This is
incompatible with the MMIO mode upon which QSPIFBlockDevice relies
to send specific commands over the QSPI bus.
For NUCLEO_F401RE, NUCLEO_F411RE, NUCLEO_F303RE, and DISCO_L475VG_IOT01A:
* Ensure the scatter files for the ARM toolchain use 2 region memory model.
The scatter files changes affects the following boards:
* NUCLEO_F401RE, STEVAL_3DP001V1 (stm32f401xe.sct)
* NUCLEO_F411RE, MTS_MDOT_F411RE, MTS_DRAGONFLY_F411RE, MTB_MTS_DRAGONFLY, SAKURAIO_EVB_01 (stm32f411re.sct)
* NUCLEO_F303RE, NUCLEO_F303ZE (stm32f303xe.sct)
* DISCO_L475VG_IOT01A, MTB_STM_L475 (stm32l475xx.sct)
* Remove the TOOLCHAIN_ARM_MICRO directories.
* Remove release_version as not necessary and as the targets can also run
Mbed OS 6.
* Remove uARM support for all FAMILY_STM32 targets.
ARMC6's assert macro does not work in C++14 constexpr context as it should.
By defining __DO_NOT_LINK_PROMISE_WITH_ASSERT, we deactivate the
extension that breaks it (having `__promise` inside `assert` - see the
compiler manual).
The extension does not appear to be useful - we have no code using
ARMC6's `__promise` directly, and putting a `__promise` inside the
assert does not appear to affect code generation in my tests.
Make the MUSCA_B1 target TF-M compatible by doing the following:
- Add flash, region definitions, and preprocessed image macros from
TF-M (at version 6e7be077eabe "Core: Add lifecycle API")
- Update the MUSCA_B1 linker script to create a flash image
compatible with TF-M.
- Update the tfm/bin_utils/assemble.py signing script to work with
preprocessed image macros rather than flat C pre-processor defines
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Make the MUSCA_A1 target TF-M compatible by doing the following:
- Add flash, region definitions, and preprocessed image macros from
TF-M (at version 6e7be077eabe "Core: Add lifecycle API")
- Update the MUSCA_A1 linker script to create a flash image
compatible with TF-M.
- Update the tfm/bin_utils/assemble.py signing script to work with
preprocessed image macros rather than flat C pre-processor defines
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
We are moving to flash_layout.h and region_defs.h being more closely
aligned with TF-M's version. As such, some of the Mbed PSA
implementation needs to additionally include region_defs.h.
Avoid surprising users. Use the Mbed OS default baud rate. Applications
that want to see TF-M debug prints can both enable and set their baud
rate at the application level. Mbed OS should not turn on TF-M debug
prints nor surprise the user with a non-default baud rate.
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Mbed Crypto has been remerged back into Mbed TLS. Update the
Mbed TLS importer script with the relevant parts of the
Mbed Crypto importer.
Signed-off-by: Darryl Green <darryl.green@arm.com>
Martin Kojtal
Chun-Chieh Li
Kyle Kearney
George Beckstein
jeromecoutant
Hugues Kamba
Kevin Bracey
Jaeden Amero
Devaraj Ranganna
Jaeden Amero
Darryl Green
Marcelo Salazar