* Use compile-time detection of hardware CRC capability, so unneeded
code and tables do not go into the image.
* Add global JSON config option to allow choice between no tables,
16-entry tables or 256-entry tables for software CRC. Default set
to 16-entry, reducing ROM size from previous 256-entry.
* Allow manual override in template parameter to force software or
bitwise CRC for a particular instance.
* Micro-optimisations, particularly use of `RBIT` instruction and
optimising bitwise computation using inline assembler.
Incompatible changes:
* Remove special-case "POLY_32BIT_REV_ANSI" - users can use standard
POLY_32BIT_ANSI, which now uses the same 16-entry tables by default,
or can use hardware acceleration, which was disabled for
POLY_32BIT_REV_ANSI. MbedCRC<POLY_32BIT_ANSI, 32, CrcMode::TABLE> can
be used to force software like POLY_32BIT_REV_ANSI.
* The precomputed table for POLY_16BIT_IBM had errors - this has been
corrected, but software CRC results will be different from the previous
software calculation.
* < 8-bit CRC results are no longer are shifted up in the output value,
but placed in the lowest bits, like other sizes. This means that code
performing the SD command CRC will now need to use `(crc << 1) | 1`,
rather than `crc | 1`.
* Change "is supported" check to be a macro, so it can be done at
compile-time.
* Eliminate weird shift on 7-bit CRCs.
* Add support for 32-bit CRCs and reversals to TMPM3HQ.
after DNS Query flooding during DNS timeout test.
DNS timeout test requires flooding device with DNS queries.
This causes problem to ESP8266 module causing it to stuck for 11 sec.
In result all following tests fails. To avoid this "smart delay" is added.
If device preforms gethostbyname correctly then tests can proceed.
Otherwise after 1 sec sleep gethostbyname is repeated until success or re-check limit (set to 15).
Thanks to this all ethernet and non ESP8266 wireless devices don't need to wait but ESP must wait.
Run WIFI-GET-RSSI and WIFI-CONNECT-DISCONNECT-REPEAT tests in secure mode
Remove WIFI-CONNECT-PARAMS-VALID-UNSECURE, it's duplicate to WIFI_CONNECT with remains moved to WIFI-CONNECT-SECURE
-Added "rtos-api" in TESTS/configs/baremetal.json
-some test case used thread_sleep_for instead Thisthread::sleep_for
-Added the EOF character
-Disable completely the non supported test cases
-Added the mbedtls,crypto,psa,filesystem,fat,littlefs in baremetal.json to resolve compiler issue
-Disable metrics that are not available for bare metal
-Moved the baremetal.json inside TESTS/configs directory
-Added the baremetal.json on Tests directory to enable bare-metal
-Conditional enable of greentea metrics
Note:
Run green tea with bare metal
mbed test -m target -t GCC_ARM -n tests-mbed_platform-transaction --app-config TESTS/baremetal.json
Extend the deepsleep wait up to 220% of the Watchdog timeout.
One of the current Watchdog timing requirements is to fire BEFORE twice
the timeout value, but at least one target (K64F) is expected to fire
EXACTLY at a doubled timeout value in deepsleep mode. This patch updates
the test to cope with a new deepsleep timing requirement.
Protocols like mdns requires IPv6 link local address to be advertised in its
records (AAAA record). LWIP::Interface::bringup() API is creating IPv6 link
local address;But as of now there is no API exposed by mbed-os to get the
IPv6 link local address.
This new API is required to deliver mDNS library support on mbed-os for Cypress
platforms. Unit tested it by invoking get_ipv6_link_local_address with a simple
application.
Looks like the PWM works fine on NRF52840_DK target, but this target has hardware limitation and the max PWM period is 32 767 us.
That is why test cases when the period is set 50 ms are failing.
The test will be modified to test the 30 ms period instead of 50 ms, so the test can pass on all CI targets.
Add a watchdog-kicking thread running in the background when the test
suite is handling a failed assertion. A single watchdog kick did not
provide enough time for the greentea communication if the watchdog
reset happened later than expected.
Use a BaseHostTestAbstract.reset() method instead of
BaseHostTestAbstract.reset_dut() for more consistent behavior with
various platforms in the CI.
In contrast to a local setup, the reset_dut() method flashes the binary
again after performing the reset in a remote setup (RaaS). This was not
intentional in reset_reason tests. Moreover, this led to a different
behavior (a different reset_reason) for different flashing methods which
are target specific.
The two character sequence %% is used in standard implementations of
printf to print a single %. This is because % is essentially printf's
escape character for format specifiers and as \% cannot work printf
uses %%.
Therefore to be compatible with string buffers containing
%%, minimal-printf also needs to only print a single %.
Notes:
- CRC and TRNG are disabled on this board since the MCU on this board does not have the required hardware.
- QSPI and QSPIF are temporarily removed due to issues related to supporting the new S25FS512S flash chip we have on this board. These will be enabled as soon as we can get the issues resolved.
https://github.com/ARMmbed/mbed-os/issues/11722
This fixes the stack overflow error during the basic USB tests.
Update the ctrl_buf member of the USBTester and USBEndpointTester test
classes to be allocated on the heap. This saves 2 KB of a main stack.
The test floods the device with UDP requests (it skips the 100 ms delay to simulate instant timeout). ESP8266 starts responding with "busy p..." message. It needs more time to process the data and recover for subsequent tests.
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
Martin Kojtal
RAJKUMAR KANAGARAJ
Chris Trowbridge
Ari Parkkila
Kevin Bracey
Kyle Kearney
Matthew Macovsky
Tymoteusz Bloch
Kimmo Vaisanen
Przemyslaw Stekiel
Mirela Chirica
Filip Jagodzinski
Jayasankar Nara
Mike Naberezny
Maciej Bocianski
Hugues Kamba
Ryan Morse
Marcin Tomczyk
jeromecoutant
Anna Bridge
Michal Paszta
Antti Kauppila