Previously, the echo test followed a flow like the following:
-STEP- -HOST PC- -DEVICE-
0 send _sync
1 echo back _sync
2 send echo_count
3 echo back echo_count
4 send first echo packet
5 echo back echo packet
(repeat echo steps)
However, as noted by issue #6659, this test would somtimes fail between
steps 4 and 5. To ensure each KV pair makes to the correct destination,
we usually write the KV back. Step 4 does not wait for this to happen
and starts sending echo packets. So the device is acting as the "echo
server".
This change makes the host PC the "echo server". The idea being that the
device will be slower and the host pc should always be able to keep up
with it, not the other way around.
- fix compiler warning message of flash_api.c
- fix compiler warning message of startup_ADuCM4050.c
- eliminate absolute address of ROM tables
- add MBED_APP_START and MBED_APP_SIZE to linker scripts
* Consolidated device_has and macros to the main MCU targets.
* Moved errata configuration to mbed_lib.json for HAL implementation.
* Moved clock configuration to mbed_lib.json for HAL implementation.
* Moved UART configuration to mbed_lib.json for HAL implementation.
Instance counter keeps track of how many objects have been
initialized and freed. On the first object the instance is
enabled and on the last object the instance is disabled.
Serial implementation uses UARTE instead of UART peripheral:
* EasyDMA is used for reading and writing data.
* Triple buffering for receiving data.
See README for full description.
When possible, the I2C HAL will now use the TWI driver in SDK 14.
The manual I2C API still maps onto the old TWI peripheral directly
because the TWI driver doesn't provide the needed low-level functionality.
The NRF52 series can map digital signals to any physical pin which
makes it challenging to associate pin names with hardware instances.
pinmap_ex:
Keep track of which hardware instance is in use and what pins are
associated with it. Currently only supports I2C and SPI, but
provides a mechanism for allocating the shared I2C/SPI hardware.
PeripheralPinsDefault:
Optional pin map for pre-assigning hardware instances at compile
time. This makes it easier to optimize hardware utilization.
* Add NRF_SD_BLE_API_VERSION=5 macro to MCU_NRF52832 target
* Added initial Softdevice v5 API support for nRF5XPalGattClient.cpp
* Added initial Softdevice v5 API support for nRF5xGap.h
* Added initial Softdevice v5 API support for nRF5xGattServer.cpp
* Make sure the ah() hash function used by the security manager is declared with C linkage
* Removed 'ARM porting pending' checks in Nordic SDK
* Added BLE configuration to mbed_lib.json for NRF52x targets
* Migrated APIs and events model for Nordic SDK14.2 & SD API v5 in btle.cpp; adopted polling dispatch model
* Migrated APIs and events model for Nordic SDK14.2 & SD API v5 in nRF5xn.cpp
* Migrated APIs and events model for Nordic SDK14.2 & SD API v5 in nRF5xGap.cpp
* Added const qualifier to hwCallbacks's p_ble_evt parameter in nRF5xGattServer
* Add workaround to enable Radio Notification module from Nordic SDK
* Disabled SWI1 interrupt manually from SWI driver module
* Added missing include directive for "nrf_nvic.h" in ble_radio_notification.c
* Set correct number of custom UUIDs
* Adjust Softdevice RAM requirements for NRF52832/S132
* RAM settings for the application were adjusted as follow:
* Start: 0x20003800
* Size: 0xC800
* Adjust Softdevice RAM requirements for NRF52840/S140
* RAM settings for the application were adjusted as follow:
* Start: 0x20003700 (was 0x20003000)
* Size: 0xC900
* Added 3dBm as a permitted TX Power value for NRF52832
* Fix address type recovery in GAP
* Return min non-connectable adv interval compatible with infrastrcture's expectations
* Moved BLE driver from TARGET_SDK_14_2/FEATURE_BLE to TARGET_SDK_14_2/TARGET_SOFTDEVICE_COMMON/ble
Martin Kojtal
Cruz Monrreal
Mahesh Mahadevan
jeromecoutant
Sam Grove
Brian Daniels
Ari Parkkila
Kimmo Vaisanen
Anna Bridge
Edmund Hsu
Keyur Hariya
Marcus Chang
sarahmarshy
Donatien Garnier
Blackstone Engineering