This function writes a "config" register to ensure that the flash part
is in high performance mode, not low-power mode. This is required at
by at least MX25R6435F in order to operate at frequencies > 33MHz
(for reference, DISCO_L475VG_IOT01A runs the QSPI interface at 80 MHz).
The config register that this writes does not appear to be covered by
the SFDP spec (JESD216D.01) so this remains the status quo of
unconditional execution, as has been done on master since #8352.
To support online compiler build for PSA targets, some files are
auto-generated (LPC55S69_NS and ARM_MUSCA_A1_NS) by the script
from offline build system. Since these files are identical for these
V8-M targets it would be good to check them in to support online
compiler as they are COMPONENT_SPE and services related.
In folder: components/TARGET_PSA/
--TARGET_MBED_SPM
--COMPONENT_SPE
psa_setup.c
--TARGET_TFM
--COMPONENT_SPE
--inc
tfm_partition_defs.inc
tfm_partition_list.inc
tfm_service_list.inc
tfm_spm_signal_defs.h
--services
--inc
autogen_sid.h
mbed_spm_partitions.h
Signed-off-by: Vikas Katariya <Vikas.Katariya@arm.com>
* Refactor some headers to use relative path from Mbed OS root.
* Refactor some data types to compile on 64bit machines.
* Refactor some debug traces to use mbed_trace.
Encourage the usage of consistent types (there are currently
a mix of `int` and `unsigned int` used for qspi instructions)
QSPI commands are limited to 8 bits, to this is a typdef to char
Update to follow the same `goto exit_point` pattern that is used
by the rest of the functions to avoid leaving the mutex locked
when errors are detected and require the function to abort.
This is related to https://github.com/ARMmbed/mbed-os/issues/11256
When TARGET_PSA is enabled on Cortex-A boards, the SECURE
is redeclared. So to minimize the impact we can redeclare this in
val.h which is used only by Mbed. And `security_t` itself is used in
mbed-os\components\TARGET_PSA\TESTS, but the SECURE string is not used.
Renamed to `caller_security_t` which aligns with
https://github.com/ARM-software/psa-arch-tests
Propagate separate alt cycle and dummy cycle counts from QSPIFBlockDevice
down to the qspi driver, so that drivers which handle the two separately have
enough information to do so.
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
All current PSoC 6 targets support the same QSPI frequency and minimum
program size. So specify a single entry rather than duplicating for
each device.
All logs now:
- start with a function name (it is not automatically logged by the logger)
- do not contain class name (this can be inferred from log preamble)
- message starts with a capital letter and ends with a full-stop
`ATCmdParser::recv()` should be used when we skim through data trying to look for something and `ATCmdParser::scanf()` is to be used when we know what we are supposed to get- as in `_oob_*` functions, except from `_oob_connection_status()`
`ESP8266Interface::connect()` and `ESP8266Interface::disconnect()` can be used in terms of asynchronous operations. Mainly, it is based on newly added private variable of type `esp_connection_software_status` which is used to keep tracking of state of connection.`wifi_connect_nonblock` test was renamed and amended to test both `connect()` and `disconnect()` operation
If psa_attestation_inject_key() is called twice, exit with a non-fatal
error status without attempting to create another attestation key. The
key already exists and doesn't need to be added again.
In custom wiring, there can be a power pin to power on/off the modem. This
commit supports it and allows for the following configurations:
- power pin name
- power pin polarity
- power on/off delay time
Make the service implementation use the same names as the API as
declared in the crypto.h header. This improves readability and
maintainability of the service.
PSA_CRYPTO_INIT is defined as a service identifier. We don't need to
redefine it as a secure function. There is only one function under this
service identifier, so no secure function definitions are necessary to
differentiate between.
Make crypto_struct_ipc.h (for use with PSA Crypto clients) match style
with the file it is based on, crypto_struct.h (from Mbed Crypto). This
helps to keep the file diff minimal so it's easy to see the meaningful
(non-style) changes.
We'll use the new ARM-software/psa-arch-tests directly instead for PSA
Crypto API 1.0b3. This commit removes the crypto compliance tests only
for now, leaving attestation and storage tests.
Kyle Kearney
Matthew Macovsky
Martin Kojtal
RAJKUMAR KANAGARAJ
Vikas Katariya
Seppo Takalo
toyowata
jeromecoutant
Jarkko Paso
Anna Bridge
Maciej Bocianski
Ben Cooke
Dominika Maziec
int_szyk
Tymoteusz Bloch
Veijo Pesonen
Hugues Kamba
Jaeden Amero
Chun-Chieh Li
Antti Kauppila
Desmond Chen
Michal Paszta
Pavel Slama