Beetle board is built to optimize power consumption therefore does not
provide on-board LEDs.
This patch adds a comment in PinNames in order to clarify that the
Emulated LEDs are provided for compatibility reasons with the MBED test
suite.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
The LF clock initialization is already handled by the SystemInit function.
This code was causing troubles when run on targets with an alternate LF
clock.
MBED OS requires an us_ticker_read function that returns a 32bit
value in microseconds. This can not be represented directly on
the Beetle Timer Load register.
max_us_on_reg = (0xFFFFFFFF ticks)/DIVIDER_US
This patch introduces an intermediate layer that counts the timer wraps
around and returns the correct value of us to the MBED library.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
MBED OS requires an lp_ticker_read function that returns a 32bit
value in microseconds. This can not be represented directly on
the Beetle Dual Timer Load register.
max_us_on_reg = (0xFFFFFFFF ticks)/DIVIDER_US
This patch introduces an intermediate layer that counts the timer wraps
around and returns the correct value of us to the MBED library.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Set the channel mux before taking a reading rather than on
initialization. This allows ADC pins on both mux A and B to be used in
the same application.
This commit adds hardware flow control capabilities for the K64F family
of MCUs. This is a backport of these commits:
9bfcfd057277042cc945
with a few changes:
- since the current version of KSDK doesn't seem to have APIs for
manipulating the flow control settings, we change the peripheral
registers directly.
- updated pin maps for RTS/CTS in accordance to the K64F datasheet.
Reported in Issue #2119
There was some inconsistency in serial interrupt handling accross STM32
serial_api.c implementation. In case application wants to be notified of
Tx interrupt, it is mainly interested in transmission complete information,
which is the _TC interrupt.
The _TXE (Transmit Data REgister Empty) is used only within driver
in case SERIAL_ASYNCH is being supported to make the transmission
more efficient.
As first reported on STM32F3 family in #1682, we need to cope
with periods in the seconds range as well. This is fixed here in
the same way as was done for STM32F3 by using the pre-scaler.
As first reported on STM32F3 family in #1682, we need to cope
with periods in the seconds range as well. This is fixed here in
the same way as was done for STM32F3 by using the pre-scaler.
Martin Kojtal
Vincenzo Frascino
Vincent Coubard
Neil Thiessen
Jarek Zgoda
Erwan GOURIOU
jeromecoutant
Bogdan Marinescu
Hasnain Virk
Russ Butler
Bogdan Marinescu
lrks
svastm
Michel JAOUEN
Laurent MEUNIER
Rohit Grover
Brian Daniels
Michel Jaouen