mirror of https://github.com/ARMmbed/mbed-os.git
Add new NUCLEO_F207ZG (CMSIS)
source: STM32Cube_FW_F2_V1.4.0 - CMSIS v2.1.1 => v2.1.2 - HAL v1.1.2 => v1.1.3pull/2159/head
parent
4f579ecf7f
commit
d32c215f4e
|
@ -0,0 +1,415 @@
|
|||
******************* (C) COPYRIGHT 2016 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f207xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V2.1.1
|
||||
;* Date : 20-November-2015
|
||||
;* Description : STM32F207xx devices vector table for MDK-ARM_MICRO toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;*******************************************************************************
|
||||
;
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
EXPORT __initial_sp
|
||||
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp EQU 0x20020000 ; Top of RAM
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit EQU (__initial_sp - Stack_Size)
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_IRQHandler ; DCMI
|
||||
DCD 0 ; Reserved
|
||||
DCD HASH_RNG_IRQHandler ; Hash and Rng
|
||||
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream6_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream4_IRQHandler [WEAK]
|
||||
EXPORT ETH_IRQHandler [WEAK]
|
||||
EXPORT ETH_WKUP_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream7_IRQHandler [WEAK]
|
||||
EXPORT USART6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_IRQHandler [WEAK]
|
||||
EXPORT DCMI_IRQHandler [WEAK]
|
||||
EXPORT HASH_RNG_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Stream0_IRQHandler
|
||||
DMA1_Stream1_IRQHandler
|
||||
DMA1_Stream2_IRQHandler
|
||||
DMA1_Stream3_IRQHandler
|
||||
DMA1_Stream4_IRQHandler
|
||||
DMA1_Stream5_IRQHandler
|
||||
DMA1_Stream6_IRQHandler
|
||||
ADC_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
DMA1_Stream7_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Stream0_IRQHandler
|
||||
DMA2_Stream1_IRQHandler
|
||||
DMA2_Stream2_IRQHandler
|
||||
DMA2_Stream3_IRQHandler
|
||||
DMA2_Stream4_IRQHandler
|
||||
ETH_IRQHandler
|
||||
ETH_WKUP_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
DMA2_Stream5_IRQHandler
|
||||
DMA2_Stream6_IRQHandler
|
||||
DMA2_Stream7_IRQHandler
|
||||
USART6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
OTG_HS_IRQHandler
|
||||
DCMI_IRQHandler
|
||||
HASH_RNG_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
|
@ -0,0 +1,42 @@
|
|||
; Scatter-Loading Description File
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Copyright (c) 2016, STMicroelectronics
|
||||
; All rights reserved.
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
; modification, are permitted provided that the following conditions are met:
|
||||
;
|
||||
; 1. Redistributions of source code must retain the above copyright notice,
|
||||
; this list of conditions and the following disclaimer.
|
||||
; 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
; this list of conditions and the following disclaimer in the documentation
|
||||
; and/or other materials provided with the distribution.
|
||||
; 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
; may be used to endorse or promote products derived from this software
|
||||
; without specific prior written permission.
|
||||
;
|
||||
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
LR_IROM1 0x08000000 0x00100000 { ; load region size_region
|
||||
ER_IROM1 0x08000000 0x00100000 { ; load address = execution address
|
||||
*.o (RESET, +First)
|
||||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
|
||||
; 97 vectors * 4 bytes = 388 bytes to reserve (0x184)
|
||||
RW_IRAM1 (0x20000000+0x184) (0x00020000-0x184) { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,436 @@
|
|||
******************* (C) COPYRIGHT 2016 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f207xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V2.1.1
|
||||
;* Date : 20-November-2015
|
||||
;* Description : STM32F207xx devices vector table for MDK-ARM_STD toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;*******************************************************************************
|
||||
;
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp EQU 0x20020000
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_IRQHandler ; DCMI
|
||||
DCD 0 ; Reserved
|
||||
DCD HASH_RNG_IRQHandler ; Hash and Rng
|
||||
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream6_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream4_IRQHandler [WEAK]
|
||||
EXPORT ETH_IRQHandler [WEAK]
|
||||
EXPORT ETH_WKUP_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream7_IRQHandler [WEAK]
|
||||
EXPORT USART6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_IRQHandler [WEAK]
|
||||
EXPORT DCMI_IRQHandler [WEAK]
|
||||
EXPORT HASH_RNG_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Stream0_IRQHandler
|
||||
DMA1_Stream1_IRQHandler
|
||||
DMA1_Stream2_IRQHandler
|
||||
DMA1_Stream3_IRQHandler
|
||||
DMA1_Stream4_IRQHandler
|
||||
DMA1_Stream5_IRQHandler
|
||||
DMA1_Stream6_IRQHandler
|
||||
ADC_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
DMA1_Stream7_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Stream0_IRQHandler
|
||||
DMA2_Stream1_IRQHandler
|
||||
DMA2_Stream2_IRQHandler
|
||||
DMA2_Stream3_IRQHandler
|
||||
DMA2_Stream4_IRQHandler
|
||||
ETH_IRQHandler
|
||||
ETH_WKUP_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
DMA2_Stream5_IRQHandler
|
||||
DMA2_Stream6_IRQHandler
|
||||
DMA2_Stream7_IRQHandler
|
||||
USART6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
OTG_HS_IRQHandler
|
||||
DCMI_IRQHandler
|
||||
HASH_RNG_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
|
@ -0,0 +1,42 @@
|
|||
; Scatter-Loading Description File
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Copyright (c) 2016, STMicroelectronics
|
||||
; All rights reserved.
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
; modification, are permitted provided that the following conditions are met:
|
||||
;
|
||||
; 1. Redistributions of source code must retain the above copyright notice,
|
||||
; this list of conditions and the following disclaimer.
|
||||
; 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
; this list of conditions and the following disclaimer in the documentation
|
||||
; and/or other materials provided with the distribution.
|
||||
; 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
; may be used to endorse or promote products derived from this software
|
||||
; without specific prior written permission.
|
||||
;
|
||||
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
LR_IROM1 0x08000000 0x00100000 { ; load region size_region
|
||||
ER_IROM1 0x08000000 0x00100000 { ; load address = execution address
|
||||
*.o (RESET, +First)
|
||||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
|
||||
; 97 vectors * 4 bytes = 388 bytes to reserve (0x184)
|
||||
RW_IRAM1 (0x20000000+0x184) (0x00020000-0x184) { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
/* mbed Microcontroller Library - stackheap
|
||||
* Setup a fixed single stack/heap memory model,
|
||||
* between the top of the RW/ZI region and the stackpointer
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2016, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include <rt_misc.h>
|
||||
#include <stdint.h>
|
||||
|
||||
extern char Image$$RW_IRAM1$$ZI$$Limit[];
|
||||
|
||||
extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
|
||||
uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
|
||||
uint32_t sp_limit = __current_sp();
|
||||
|
||||
zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
|
||||
|
||||
struct __initial_stackheap r;
|
||||
r.heap_base = zi_limit;
|
||||
r.heap_limit = sp_limit;
|
||||
return r;
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
|
@ -0,0 +1,154 @@
|
|||
/* Linker script to configure memory regions. */
|
||||
/* 97 vectors * 4 bytes = 388 bytes to reserve (0x184) */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
|
||||
RAM (rwx) : ORIGIN = 0x20000184, LENGTH = 128K - 0x184
|
||||
}
|
||||
|
||||
/* Linker script to place sections and symbol values. Should be used together
|
||||
* with other linker script that defines memory regions FLASH and RAM.
|
||||
* It references following symbols, which must be defined in code:
|
||||
* Reset_Handler : Entry of reset handler
|
||||
*
|
||||
* It defines following symbols, which code can use without definition:
|
||||
* __exidx_start
|
||||
* __exidx_end
|
||||
* __etext
|
||||
* __data_start__
|
||||
* __preinit_array_start
|
||||
* __preinit_array_end
|
||||
* __init_array_start
|
||||
* __init_array_end
|
||||
* __fini_array_start
|
||||
* __fini_array_end
|
||||
* __data_end__
|
||||
* __bss_start__
|
||||
* __bss_end__
|
||||
* __end__
|
||||
* end
|
||||
* __HeapLimit
|
||||
* __StackLimit
|
||||
* __StackTop
|
||||
* __stack
|
||||
* _estack
|
||||
*/
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
KEEP(*(.isr_vector))
|
||||
*(.text*)
|
||||
KEEP(*(.init))
|
||||
KEEP(*(.fini))
|
||||
|
||||
/* .ctors */
|
||||
*crtbegin.o(.ctors)
|
||||
*crtbegin?.o(.ctors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
||||
*(SORT(.ctors.*))
|
||||
*(.ctors)
|
||||
|
||||
/* .dtors */
|
||||
*crtbegin.o(.dtors)
|
||||
*crtbegin?.o(.dtors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
||||
*(SORT(.dtors.*))
|
||||
*(.dtors)
|
||||
|
||||
*(.rodata*)
|
||||
|
||||
KEEP(*(.eh_frame*))
|
||||
} > FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} > FLASH
|
||||
|
||||
__exidx_start = .;
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
} > FLASH
|
||||
__exidx_end = .;
|
||||
|
||||
__etext = .;
|
||||
_sidata = .;
|
||||
|
||||
.data : AT (__etext)
|
||||
{
|
||||
__data_start__ = .;
|
||||
_sdata = .;
|
||||
*(vtable)
|
||||
*(.data*)
|
||||
|
||||
. = ALIGN(4);
|
||||
/* preinit data */
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP(*(.preinit_array))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
/* init data */
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP(*(SORT(.init_array.*)))
|
||||
KEEP(*(.init_array))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
|
||||
|
||||
. = ALIGN(4);
|
||||
/* finit data */
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP(*(SORT(.fini_array.*)))
|
||||
KEEP(*(.fini_array))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
|
||||
KEEP(*(.jcr*))
|
||||
. = ALIGN(4);
|
||||
/* All data end */
|
||||
__data_end__ = .;
|
||||
_edata = .;
|
||||
|
||||
} > RAM
|
||||
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__bss_start__ = .;
|
||||
_sbss = .;
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
__bss_end__ = .;
|
||||
_ebss = .;
|
||||
} > RAM
|
||||
|
||||
.heap (COPY):
|
||||
{
|
||||
__end__ = .;
|
||||
end = __end__;
|
||||
*(.heap*)
|
||||
__HeapLimit = .;
|
||||
} > RAM
|
||||
|
||||
/* .stack_dummy section doesn't contains any symbols. It is only
|
||||
* used for linker to calculate size of stack sections, and assign
|
||||
* values to stack symbols later */
|
||||
.stack_dummy (COPY):
|
||||
{
|
||||
*(.stack*)
|
||||
} > RAM
|
||||
|
||||
/* Set stack top to end of RAM, and stack limit move down by
|
||||
* size of stack_dummy section */
|
||||
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
|
||||
_estack = __StackTop;
|
||||
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
/* Check if data + heap + stack exceeds RAM limit */
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
|
||||
}
|
|
@ -0,0 +1,523 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f207xx.s
|
||||
* @author MCD Application Team
|
||||
* @version V2.1.1
|
||||
* @date 20-November-2015
|
||||
* @brief STM32F207xx Devices vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
//bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
//bl main
|
||||
// Calling the crt0 'cold-start' entry point. There __libc_init_array is called
|
||||
// and when existing hardware_init_hook() and software_init_hook() before
|
||||
// starting main(). software_init_hook() is available and has to be called due
|
||||
// to initializsation when using rtos.
|
||||
bl _start
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_IRQHandler /* PVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word CAN1_TX_IRQHandler /* CAN1 TX */
|
||||
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
|
||||
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
|
||||
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
|
||||
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FSMC_IRQHandler /* FSMC */
|
||||
.word SDIO_IRQHandler /* SDIO */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word ETH_IRQHandler /* Ethernet */
|
||||
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
|
||||
.word CAN2_TX_IRQHandler /* CAN2 TX */
|
||||
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
|
||||
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
|
||||
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word DCMI_IRQHandler /* DCMI */
|
||||
.word 0 /* CRYP crypto */
|
||||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DCMI_IRQHandler
|
||||
.thumb_set DCMI_IRQHandler,Default_Handler
|
||||
|
||||
.weak HASH_RNG_IRQHandler
|
||||
.thumb_set HASH_RNG_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,633 @@
|
|||
;/******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f207xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V2.1.1
|
||||
;* Date : 20-November-2015
|
||||
;* Description : STM32F20x/21x devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_IRQHandler ; DCMI
|
||||
DCD 0 ; Reserved
|
||||
DCD HASH_RNG_IRQHandler ; Hash and RNG
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMP_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMP_STAMP_IRQHandler
|
||||
B TAMP_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream0_IRQHandler
|
||||
B DMA1_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream1_IRQHandler
|
||||
B DMA1_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream2_IRQHandler
|
||||
B DMA1_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream3_IRQHandler
|
||||
B DMA1_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream4_IRQHandler
|
||||
B DMA1_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream5_IRQHandler
|
||||
B DMA1_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream6_IRQHandler
|
||||
B DMA1_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK ADC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC_IRQHandler
|
||||
B ADC_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
B TIM1_BRK_TIM9_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
B TIM1_UP_TIM10_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
B TIM1_TRG_COM_TIM11_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
B OTG_FS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
B TIM8_BRK_TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
B TIM8_UP_TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
B TIM8_TRG_COM_TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream7_IRQHandler
|
||||
B DMA1_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream0_IRQHandler
|
||||
B DMA2_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream1_IRQHandler
|
||||
B DMA2_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream2_IRQHandler
|
||||
B DMA2_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream3_IRQHandler
|
||||
B DMA2_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream4_IRQHandler
|
||||
B DMA2_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK ETH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_IRQHandler
|
||||
B ETH_IRQHandler
|
||||
|
||||
PUBWEAK ETH_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_WKUP_IRQHandler
|
||||
B ETH_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_TX_IRQHandler
|
||||
B CAN2_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX0_IRQHandler
|
||||
B CAN2_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX1_IRQHandler
|
||||
B CAN2_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_SCE_IRQHandler
|
||||
B CAN2_SCE_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_IRQHandler
|
||||
B OTG_FS_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream5_IRQHandler
|
||||
B DMA2_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream6_IRQHandler
|
||||
B DMA2_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream7_IRQHandler
|
||||
B DMA2_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK USART6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART6_IRQHandler
|
||||
B USART6_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_EV_IRQHandler
|
||||
B I2C3_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_ER_IRQHandler
|
||||
B I2C3_ER_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_OUT_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
B OTG_HS_EP1_OUT_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_IN_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
B OTG_HS_EP1_IN_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
B OTG_HS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_IRQHandler
|
||||
B OTG_HS_IRQHandler
|
||||
|
||||
PUBWEAK DCMI_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DCMI_IRQHandler
|
||||
B DCMI_IRQHandler
|
||||
|
||||
PUBWEAK HASH_RNG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HASH_RNG_IRQHandler
|
||||
B HASH_RNG_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,31 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20020000;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
|
@ -0,0 +1,38 @@
|
|||
/* mbed Microcontroller Library
|
||||
* A generic CMSIS include header
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2016, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_CMSIS_H
|
||||
#define MBED_CMSIS_H
|
||||
|
||||
#include "stm32f2xx.h"
|
||||
#include "cmsis_nvic.h"
|
||||
|
||||
#endif
|
|
@ -0,0 +1,57 @@
|
|||
/* mbed Microcontroller Library
|
||||
* CMSIS-style functionality to support dynamic vectors
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2016, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
#include "cmsis_nvic.h"
|
||||
|
||||
#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
|
||||
#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
|
||||
|
||||
void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)SCB->VTOR;
|
||||
uint32_t i;
|
||||
|
||||
// Copy and switch to dynamic vectors if the first time called
|
||||
if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
|
||||
uint32_t *old_vectors = vectors;
|
||||
vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
|
||||
for (i = 0; i < NVIC_NUM_VECTORS; i++) {
|
||||
vectors[i] = old_vectors[i];
|
||||
}
|
||||
SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
|
||||
}
|
||||
vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
|
||||
}
|
||||
|
||||
uint32_t NVIC_GetVector(IRQn_Type IRQn)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t*)SCB->VTOR;
|
||||
return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
|
||||
}
|
|
@ -0,0 +1,54 @@
|
|||
/* mbed Microcontroller Library
|
||||
* CMSIS-style functionality to support dynamic vectors
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2016, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_CMSIS_NVIC_H
|
||||
#define MBED_CMSIS_NVIC_H
|
||||
|
||||
// CORE: 16 vectors (= 64 bytes from 0x00 to 0x3F)
|
||||
// MCU Peripherals: 81 vectors
|
||||
// Total: 388 bytes to be reserved in RAM (see scatter file)
|
||||
#define NVIC_NUM_VECTORS 97
|
||||
#define NVIC_USER_IRQ_OFFSET 16
|
||||
|
||||
#include "cmsis.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
|
||||
uint32_t NVIC_GetVector(IRQn_Type IRQn);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
|
@ -0,0 +1,142 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file hal_tick.c
|
||||
* @author MCD Application Team
|
||||
* @brief Initialization of HAL tick
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#include "hal_tick.h"
|
||||
|
||||
TIM_HandleTypeDef TimMasterHandle;
|
||||
uint32_t PreviousVal = 0;
|
||||
|
||||
void us_ticker_irq_handler(void);
|
||||
|
||||
void timer_irq_handler(void)
|
||||
{
|
||||
// Channel 1 for mbed timeout
|
||||
if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
|
||||
if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC1) == SET) {
|
||||
__HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
|
||||
us_ticker_irq_handler();
|
||||
}
|
||||
}
|
||||
|
||||
// Channel 2 for HAL tick
|
||||
if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC2) == SET) {
|
||||
if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC2) == SET) {
|
||||
__HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
|
||||
uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
|
||||
if ((val - PreviousVal) >= HAL_TICK_DELAY) {
|
||||
// Increment HAL variable
|
||||
HAL_IncTick();
|
||||
// Prepare next interrupt
|
||||
__HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
|
||||
PreviousVal = val;
|
||||
#if 0 // For DEBUG only
|
||||
HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Reconfigure the HAL tick using a standard timer instead of systick.
|
||||
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
uint32_t PclkFreq;
|
||||
|
||||
// Get clock configuration
|
||||
// Note: PclkFreq contains here the Latency (not used after)
|
||||
HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
|
||||
|
||||
// Get TIM5 clock value
|
||||
PclkFreq = HAL_RCC_GetPCLK1Freq();
|
||||
|
||||
// Enable timer clock
|
||||
TIM_MST_RCC;
|
||||
|
||||
// Reset timer
|
||||
TIM_MST_RESET_ON;
|
||||
TIM_MST_RESET_OFF;
|
||||
|
||||
// Configure time base
|
||||
TimMasterHandle.Instance = TIM_MST;
|
||||
TimMasterHandle.Init.Period = 0xFFFFFFFF;
|
||||
|
||||
// TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
|
||||
if (RCC_ClkInitStruct.APB1CLKDivider == RCC_HCLK_DIV1)
|
||||
TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick
|
||||
else
|
||||
TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick
|
||||
|
||||
TimMasterHandle.Init.ClockDivision = 0;
|
||||
TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
TimMasterHandle.Init.RepetitionCounter = 0;
|
||||
HAL_TIM_OC_Init(&TimMasterHandle);
|
||||
|
||||
NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
|
||||
NVIC_EnableIRQ(TIM_MST_IRQ);
|
||||
|
||||
// Channel 1 for mbed timeout
|
||||
HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
|
||||
|
||||
// Channel 2 for HAL tick
|
||||
HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
|
||||
PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
|
||||
__HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
|
||||
__HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
|
||||
|
||||
#if 0 // For DEBUG only
|
||||
__GPIOB_CLK_ENABLE();
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
#endif
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,60 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file hal_tick.h
|
||||
* @author MCD Application Team
|
||||
* @brief Initialization of HAL tick
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#ifndef __HAL_TICK_H
|
||||
#define __HAL_TICK_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "stm32f2xx.h"
|
||||
#include "cmsis_nvic.h"
|
||||
|
||||
#define TIM_MST TIM5
|
||||
#define TIM_MST_IRQ TIM5_IRQn
|
||||
#define TIM_MST_RCC __TIM5_CLK_ENABLE()
|
||||
|
||||
#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
|
||||
#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
|
||||
|
||||
#define HAL_TICK_DELAY (1000) // 1 ms
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __HAL_TICK_H
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
File diff suppressed because it is too large
Load Diff
|
@ -0,0 +1,206 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx.h
|
||||
* @author MCD Application Team
|
||||
* @version V2.1.2
|
||||
* @date 29-June-2016
|
||||
* @brief CMSIS STM32F2xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32F2xx device used in the target application
|
||||
* - To use or not the peripheral’s drivers in application code(i.e.
|
||||
* code will be based on direct access to peripheral’s registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f2xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __STM32F2xx_H
|
||||
#define __STM32F2xx_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32 Family
|
||||
*/
|
||||
#if !defined (STM32F2)
|
||||
#define STM32F2
|
||||
#endif /* STM32F2 */
|
||||
|
||||
/* Uncomment the line below according to the target STM32 device used in your
|
||||
application
|
||||
*/
|
||||
#if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx)
|
||||
|
||||
/* #define STM32F205xx */ /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF,
|
||||
STM32F205RE, STM32F205VE, STM32F205ZE, STM32F205RC, STM32F205VC, STM32F205ZC,
|
||||
STM32F205RB and STM32F205VB Devices */
|
||||
/* #define STM32F215xx */ /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */
|
||||
#define STM32F207xx /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF,
|
||||
STM32F207VE, STM32F207ZE, STM32F207IE, STM32F207VC, STM32F207ZC and STM32F207IC Devices */
|
||||
/* #define STM32F217xx */ /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */
|
||||
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
#define USE_HAL_DRIVER
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number V2.1.2
|
||||
*/
|
||||
#define __STM32F2xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
|
||||
#define __STM32F2xx_CMSIS_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */
|
||||
#define __STM32F2xx_CMSIS_VERSION_SUB2 (0x02U) /*!< [15:8] sub2 version */
|
||||
#define __STM32F2xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
|
||||
#define __STM32F2xx_CMSIS_VERSION ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\
|
||||
|(__STM32F2xx_CMSIS_VERSION_SUB1 << 16)\
|
||||
|(__STM32F2xx_CMSIS_VERSION_SUB2 << 8 )\
|
||||
|(__STM32F2xx_CMSIS_VERSION))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F205xx)
|
||||
#include "stm32f205xx.h"
|
||||
#elif defined(STM32F215xx)
|
||||
#include "stm32f215xx.h"
|
||||
#elif defined(STM32F207xx)
|
||||
#include "stm32f207xx.h"
|
||||
#elif defined(STM32F217xx)
|
||||
#include "stm32f217xx.h"
|
||||
#else
|
||||
#error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum {
|
||||
RESET = 0,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum {
|
||||
DISABLE = 0,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum {
|
||||
ERROR = 0,
|
||||
SUCCESS = !ERROR
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macro
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32f2xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* __STM32F2xx_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,460 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f2xx.c
|
||||
* @author MCD Application Team
|
||||
* @version V2.1.2
|
||||
* @date 29-June-2016
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f2xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* This file configures the system clock as follows:
|
||||
*-----------------------------------------------------------------------------
|
||||
* System clock source | [1] PLL_HSE_XTAL | [2] PLL_HSI if [1] fails
|
||||
* | (external 25MHz xtal) | (internal 16MHz clock)
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK(MHz) | 120 | 96
|
||||
*-----------------------------------------------------------------------------
|
||||
* AHBCLK (MHz) | 120 | 96
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB1CLK (MHz) | 30 | 12
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB2CLK (MHz) | 60 | 24
|
||||
*-----------------------------------------------------------------------------
|
||||
* USB capable | YES | NO
|
||||
* with 48 MHz precise clock | |
|
||||
*-----------------------------------------------------------------------------
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f2xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f2xx.h"
|
||||
#include "hal_tick.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM mounted
|
||||
on STM322xG_EVAL board as data memory */
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
|
||||
#define USE_PLL_HSE_EXTC (1) /* Use external clock */
|
||||
#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* This variable can be updated in Three ways :
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 120000000;
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
|
||||
#endif
|
||||
|
||||
uint8_t SetSysClock_PLL_HSI(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemFrequency variable.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= (uint32_t)0x00000001;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000;
|
||||
|
||||
/* Reset HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= (uint32_t)0xFEF6FFFF;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x24003010;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIR = 0x00000000;
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
|
||||
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
|
||||
SystemCoreClock = 120000000;
|
||||
#else
|
||||
SystemCoreClock = 96000000;
|
||||
#endif
|
||||
HAL_Init();
|
||||
|
||||
/* Configure the System clock source, PLL Multiplier and Divider factors,
|
||||
AHB/APBx prescalers and Flash settings */
|
||||
SetSysClock();
|
||||
|
||||
/* Reset the timer to avoid issues after the RAM initialization */
|
||||
TIM_MST_RESET_ON;
|
||||
TIM_MST_RESET_OFF;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
SystemCoreClock = HAL_RCC_GetSysClockFreq();
|
||||
}
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f2xx.s before jump to main.
|
||||
* This function configures the external SRAM mounted on STM322xG_EVAL board
|
||||
* This SRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
||||
(void)(tmp);
|
||||
|
||||
/* Connect PDx pins to FSMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FSMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FSMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FSMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*--FSMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SetSysClock(void)
|
||||
{
|
||||
/* 1- Try to start with HSE and external clock */
|
||||
#if USE_PLL_HSE_EXTC != 0
|
||||
if (SetSysClock_PLL_HSE(1) == 0)
|
||||
#endif
|
||||
{
|
||||
/* 2- If fail try to start with HSE and external xtal */
|
||||
#if USE_PLL_HSE_XTAL != 0
|
||||
if (SetSysClock_PLL_HSE(0) == 0)
|
||||
#endif
|
||||
{
|
||||
/* 3- If fail start with HSI clock */
|
||||
if (SetSysClock_PLL_HSI() == 0) {
|
||||
while (1) {
|
||||
// [TODO] Put something here to tell the user that a problem occured...
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#if 0 // SYSCLK can be map to PC_9
|
||||
HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_2);
|
||||
#endif
|
||||
}
|
||||
|
||||
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
|
||||
{
|
||||
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
// Enable HSE oscillator and activate PLL with HSE as source
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
if (bypass == 0) {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External xtal on OSC_IN/OSC_OUT */
|
||||
} else {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External clock on OSC_IN */
|
||||
}
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 240;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 5;
|
||||
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
|
||||
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSI(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = 16;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 192;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 8;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,123 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f2xx.h
|
||||
* @author MCD Application Team
|
||||
* @version V2.1.2
|
||||
* @date 29-June-2016
|
||||
* @brief CMSIS Cortex-M3 Device System Source File for STM32F2xx devices.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f2xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef __SYSTEM_STM32F2XX_H
|
||||
#define __SYSTEM_STM32F2XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
extern void SetSysClock(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__SYSTEM_STM32F2XX_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
Loading…
Reference in New Issue