1. In drivers/Timer.cpp make sure that hardware timer is initialized outside of critical section.
This is because on PSoC 6 hardware resources are shared between both cores
and we have to make sure that the other core is not already using a particular resource.
This mechanism is based on interprocessor communication taht cannot be handled iside of
critical section.
2. Added support for post-binary hook function for PSoC 6 targets, so the hex image for M0+ CPU core
can be merged with M4 core image for the final image.
3. Added possibility to use hook function from exportes, so the M0+ hex image could be included
in the generated project.
4. Included hex images in the build dependency list, so the update of image is catched by the
build process.
Transport is a member of TLSSocket which is derived from TLSSocketWrapper.
Make sure that TLSSocketWrapper::close() is called before the transport is
destroyed.
To get Wi-Sun mesh network working, also nanostack with Wi-Sun support
is needed. ws_empty_functions.c and ws_management_api.h are temporary
included here, so that wisun_tasklet will compiled without problems.
They will replaced with the official versions with next nanostack release.
Ethernet controller. To ensure proper operation, some methods
needed to be updated in the SMSC9220's native driver as well.
It passes all related Greentea tests, however when supervised by
the Python environment it tends to fail because of Timeout.
The current timeout is set to 1200s that seems to be a little bit short
to finish all test cases, the timeout happens towards the end of the
last test case.
Change-Id: I914608c34828b493a80e133cd132537a297bfc84
Signed-off-by: Bence Kaposzta <bence.kaposzta@arm.com>
Save some ROM space by putting MBED_NORETURN attributes on error
functions and failed asserts.
mbed_error was documented as returning an error code. It never
actually could return, so documentation updated, but return type
kept.
Private constructor called in TCPSocket accept, when creating a new Socket.
Close() method calls moved "up" to InternetSocket.
InternetSocket::close() returns proper error code when no socket available.
Add TcpSocket::accept icetea tests.
Deleting sockets moved to teardown.
mbed.h has 'using namespace mbed;', hence some of the files skip
adding required namespace to the code, it is always good to specify the
namespace around the elements in header and `using namespace` in
specific CPP files, instead of all
If sequence from buffer contains tag but symbol before tag is same as
first symbol of the tag, then the tag wasn't detected.
For example, "\r\n" tag was not found from "\r\r\nOK" sequence.
If Mbed TLS support for X509 is not compiled in, this class would
not compile anymore. However, there might be other uses for it, even
if certificates are not used. Therefore add flagging for X509 only
on specific functions.
mbed.h was added in test, via greentea and utest header files. 'mbed.h' is removed
from header files and required header file and namespace is added to CPP/C files
Previously, we weren't filling in RX1 frequecny in rx_window1_config
structure. However, everything worked as in LoRaPHY::rx_config() API
there was a check which filled in correct RX1 frequency.
Now we are filling in RX1 freq. properly while we are computing
parameters for RX1 window.
The idea behind the method post_process_no_reception() is to post
process any outgoing TX but we shouldn't do that if a CONFIRMED message
is outgoing and there are still some retries left.
After transmission we should change the state before invoking opening of
slots as we may start receiving in the rx slots and the state would
suddenly change from SENDING to RECEIVING without going through the
ACK_WAIT state (in case of CONFIRMED messages). Tests show that after
this slight adjustment, our number of ack retries have significantly
reduced.
LinkADRReq mac command can be used by the network server to set a
certain level of QOS using NbTrans field which is applicable to
Unconfirmed traffic only for 1.0.2 spec.
This commit introduces mechanisms to facilitate this QOS. It means to
repeat an outgoing unconfirmed message NbTrans times without changing
its frame counter.
For class C, we have retired the ack_expiry_timer_for_class_c and have
replaced it with another timer which mimics the RX2 closure as in Class
A but doesn't actually close RX2 window. It's just a mechanism by which
the state machine is informed that the you can proceed forward, we have
not received anything in RX2 window either. This is needed as RX2
doesn't timeout in class C (i.e., the radio remains in continuous mode).
In addition to that we need to close any pending timers for Receive
windows after the MIC has passed and the Duplicate counter check has
also been passed.
Before going after an automatic uplink, we should check if there was an
automatic uplink already ongoing, i.e., the ack for the previous
automatic uplink cycle has not been received.
If there is we shouldn't queue the new automatic uplink and wait for
the previous Ack cycle to complete.
1. RTOS is needed only for Stack stats
Move+Add all required header files for RTOS into MBED_STACK_STATS_ENABLED
define. Also added 'using namespace'
2. Add heap stats only when MBED_HEAP_STATS_ENABLED
Change error from `MBEDTLS_PLATFORM_HW_FAILED` to
`MBEDTLS_PLATFORM_HW_ACCEL_FAILED` and the value to 0x70,
as the previous value cannot be used as a low level error code.
Provide TLSSocket implementation. This implementation allows TLSSocket
to wrap around any existing socket. Currently only TLS supported. DTLS
not yet implemented.
Design document also provided with the implementation.
Documentation submitted to Mbed OS handbook.
Make the following changes to doxyfile_options:
-Change CASE_SENSE_NAMES so names of files generated match mbed-os docs
-Change DISABLE_INDEX so navigation bar shows
-Change CLASS_DIAGRAMS so inheritance diagram gets generated
-Change USE_MDFILE_AS_MAINPAGE and add DOXYGEN_FRONTPAGE.md to
FILE_PATTERNS so the correct main page is found and used
-Remove DEVICE_ETH from PREDEFINED since this is no longer relevent
-Change GENERATE_XML and XML_OUTPUT so no xml is generated
-Change SEARCHENGINE to match the docs
Make the following changes in doxygen_options.json:
-Add all non-default values in doxyfile_options to the json
-Break json into 3 groups
1. Values that are the same as doxyfile_options
2. Values that must be different from doxyfile_options
3. Values the are overriden by the docs builder
-Make the doxyegn search directory "INPUT" start in mbed-os rather
than one level above mbed-os.
Finally, rename the BLE doxygen front page so it is not confused with
the mbed-os front page.
Add re-scan routine goto if message is caused user callback
This will fix hard fault when blockwise message sending timeouts. This happens cause same list is manipulated through rx callback.
Static Thread methods and signal methods have been deprecated. Remove
all references in the main code, and most of the tests. Some tests of
the deprecated APIs themselves remain.
Revert deprecation of FlashIAPBlockDevice 2 argument constructor has this was a breaking change. This follows a similar change in the external flashiap-driver repo.
For Windows-formatted SD card, it is not partitioned (no MBR), but its PBR has the
same boot signature (0xaa55) as MBR. We would easily mis-recognize this SD card has valid
partitions if we only check partition type. We add check by only accepting 0x00 (inactive)
/0x80 (active) for valid partition status.
New classes covered with unit tests: SocketAddress, EthernetInterface, EMACInterface, WiFiAccessPoint.
Also added missing namespace in front of mbed::Callback usages.
EMACInterface is covered by the EthernetInterface unit tests.
When socket created using accept() is closed by calling the close()
method, "delete this" is executed which triggers the destructor call
on TCPSocket which in turn calls close() once again. Because _stack
is already 0 this results in a hard-fault.
Add a check that skips the rest of the close() method is the _stack
is already 0.
Missing CellularSocket constructor caused uninitialized values to be used.
Also changed comparision macros to ASSERT_EQ as suggested by GoogleTest guide.
If the packet is already handed over to the PHY layer, we shouldn't be
able to cancel that particular transmission. In addition to that if the
backoff timer is either not applied or has been deactivated, should end
up in no-op rather than having normal termination. A new error code has
been introduced to cover no-op cases. This error code replaces the
compliance test related error code which is no longer relevant.
clear_tx_pipe() does nothing if:
- The stack cannot cancel TX (already handed over to PHY)
- The backoff timer is not active at all
- The event is disaptched to schedule
stop_sending() will only post process ongoin TX if the pipe was
definitely cleared.
- Add function that can be used to clear the received blockwise payloads for example in the case of a connection error.
- Silence compiler warning when CoAP duplicate detection is enabled.
Previously, we weren't filling in RX1 frequecny in rx_window1_config
structure. However, everything worked as in LoRaPHY::rx_config() API
there was a check which filled in correct RX1 frequency.
Now we are filling in RX1 freq. properly while we are computing
parameters for RX1 window.
The idea behind the method post_process_no_reception() is to post
process any outgoing TX but we shouldn't do that if a CONFIRMED message
is outgoing and there are still some retries left.
After transmission we should change the state before invoking opening of
slots as we may start receiving in the rx slots and the state would
suddenly change from SENDING to RECEIVING without going through the
ACK_WAIT state (in case of CONFIRMED messages). Tests show that after
this slight adjustment, our number of ack retries have significantly
reduced.
LinkADRReq mac command can be used by the network server to set a
certain level of QOS using NbTrans field which is applicable to
Unconfirmed traffic only for 1.0.2 spec.
This commit introduces mechanisms to facilitate this QOS. It means to
repeat an outgoing unconfirmed message NbTrans times without changing
its frame counter.
For class C, we have retired the ack_expiry_timer_for_class_c and have
replaced it with another timer which mimics the RX2 closure as in Class
A but doesn't actually close RX2 window. It's just a mechanism by which
the state machine is informed that the you can proceed forward, we have
not received anything in RX2 window either. This is needed as RX2
doesn't timeout in class C (i.e., the radio remains in continuous mode).
In addition to that we need to close any pending timers for Receive
windows after the MIC has passed and the Duplicate counter check has
also been passed.
Before going after an automatic uplink, we should check if there was an
automatic uplink already ongoing, i.e., the ack for the previous
automatic uplink cycle has not been received.
If there is we shouldn't queue the new automatic uplink and wait for
the previous Ack cycle to complete.
TB_SENSE_12 would have been left behind by the changes in #7778. This commit implements the changes in mbed to allow targets to provide a default network interface for Silicon Labs targets.
While performing compliance tests with an industry tester, we realized
that there was no need for any extra handling code for the compliance
tests. The tests would run fine, if we only have a handling application.
However, in normal operation we wouldn't like the network to send us any
traffic on compliance testing port. To mitigate that, on the reception
path we filter out any traffic on compliance testing port if compliance
testing is not underway. User should define LORAWAN_COMPLIANCE_TEST macro
in mbed_app.json to enable traffic on compliance test port.
This commit fixes two bugs related to ADRAckReq:
- adr_ack_counter must be incremented for all uplink messages (not just confirmed)
- When ADR_ACK_LIMIT + ADR_ACK_DELAY has been reached, stack decreased used
datarate twice.
- Bug fix: Remove timed out blockwise message from resend queue. If blockwise message was timed out message was still kept in the resend queue which causes unnecessary reconnections on client side.
- Documentation: Document all the available macros.
Make the built-in FileSystem::get_default_instance() implementation
instantiate storage as "flash" or "sd", with "default" as an alias.
This will aid interworking between simple and advanced filesystem code
on various platforms. The expectation is that the names "sd" or "flash"
will be always available if the device is available and configured,
regardless of what "default" represents.
"/fs" is a tautology - not a good name for the default filing system, as
whereever we use it, we know we're specifying a filing system. Rename to
"/default".
Martin Kojtal
Arto Kinnunen
Kari Haapalehto
Cruz Monrreal
Jeroen de Bruijn
Marcus Chang
Leszek Rusinowicz
Seppo Takalo
Jaakko Korhonen
Qinghao Shi
Kevin Bracey
Terence Zhang
Amanda Butler
kegilbert
Bence Kaposzta
Marc Emmers
Mirela Chirica
Mel W
paul-szczepanek-arm
Michal Paszta
mudassar-ublox
deepikabhavnani
Paul Szczepanek
Simon Butcher
Conrad Braam
Amir Cohen
aqin
Taiki
Kimmo Vaisanen
Anna Bridge
Jarkko Paso
Antti Kauppila
Hasnain Virk
Ron Eldor
Ari Parkkila
Russ Butler
Brian Esquilona
Antti Yli-Tokola
Yossi Levy
Oren Cohen
ccli8
Sławek Piotrowski
Andrew Leech
Moran Peker
Leon Lindenfelser
Nir Sonnenschein
cedrick kukela
Juho Eskeli
pingdan32
jeromecoutant
David Saada
Steven
Aashish chaddha
Teppo Järvelin
Jani Suonpera
Edd Inglis
Juha Ylinen