Commit Graph

100 Commits (88988b688b01264dec4ca8536a077ae143c95589)

Author SHA1 Message Date
Martin Kojtal 507956d658 Merge pull request #3317 from jeromecoutant/PR_F429
NUCLEO_F429ZI has integrated LSE
2016-12-05 16:53:09 +00:00
TsungtaWu 7d4befa01b DELTA_DFBM_NQ620 default configuration (#3298)
* Change default SRC setting and add mbed_sdk_init() for DELTA_DFBM_NQ620

Change SRC setting to RC as default to match with hardware config.
mbed_sdk_init() is added for internal debug purpose (experimental)

* remove the redundant #define

Those #define never used.
2016-12-05 16:43:07 +00:00
Martin Kojtal ab2e869a24 Merge pull request #3157 from SiliconLabs/SiliconLabs-EFR32
[Silicon Labs] Adding support for EFR32MG1 wireless SoC
2016-12-02 15:46:35 +01:00
jeromecoutant 7adb7a54de NUCLEO_F429ZI has integrated LSE 2016-11-30 14:43:01 +01:00
jeromecoutant 29771cb891 DISCO_L053C8 doesn't support LSE 2016-11-30 09:02:06 +01:00
Martin Kojtal d4e23e1048 Merge pull request #3291 from mazgch/patch-1
Adding mbed enabled Maker board with NINA-B1 and EVA-M8Q
2016-11-29 18:19:41 +01:00
Martin Kojtal a8ebfaa058 Merge pull request #3288 from LMESTM/dev_spi_asynch_l0l1
Dev spi asynch l0l1
2016-11-29 18:17:06 +01:00
Martin Kojtal 42f4843b97 Merge pull request #3241 from NXPmicro/Add_KW41_Support
Add support for FRDM-KW41
2016-11-29 18:11:59 +01:00
Martin Kojtal 93c08f340a Merge pull request #3062 from jamike/TARGET_STM_USBDEVICE_FS
TARGET_STM :USB device FS
2016-11-29 18:07:11 +01:00
Michael Ammann 1b59ec0376 Update targets.json 2016-11-18 17:15:08 +01:00
Steven Cooreman ed905b7cc8 Revert "[EFR32] Move the mbedTLS hardware acceleration code to EFR32 family"
This reverts commit a0f62b1e4f.
2016-11-18 11:00:57 +01:00
Laurent MEUNIER 40b0402484 [stm32] Enable SPI_ASYNCH for L0 and L1 families 2016-11-18 09:59:53 +01:00
Bartek Szatkowski 20b7f05721 WiFi: Make WiFi default networking interface on Odin board
That disables Ethernet by default and makes sure the Ethernet tests are
not failing when it's disabled.
2016-11-16 12:00:09 +00:00
Mahadevan Mahesh 15d64c9aec Add support for FRDM-KW41
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2016-11-15 08:13:03 -06:00
Anna Bridge f6f872a858 Merge pull request #3159 from radhika-raghavendran/master
User trim values for NCS36510
2016-11-10 17:06:54 +00:00
Anna Bridge baec7b3aec Merge pull request #3198 from jeromecoutant/PR_F410_ASYNC
NUCLEO_F410RB: Add I2C_ASYNCH capability
2016-11-10 17:04:28 +00:00
Anna Bridge 67e03ee065 Merge pull request #3211 from OpenNuvoton/nuvoton
[NUC472/M453] Support single UART shared by multiple serial objects and other updates
2016-11-10 17:03:42 +00:00
Michel Jaouen 06ebe4fab4 TARGET_STM32F4: USB with STM HAL for
NUCLEO_F401RE, NUCLEO_F429ZI, NUCLEO_F446ZE, DISCO_F407VG, NUCLEO_F411RE
2016-11-09 17:24:23 +01:00
Radhika d637f6d3ad Modified user trim default values. 2016-11-09 17:12:35 +05:30
Radhika 63f5c9781d Configuration of user trim moved to targets.json 2016-11-08 17:29:32 +05:30
Steven Cooreman 0f20cd11a9 [EFR32] fix typo in targets.json 2016-11-08 10:49:02 +01:00
jeromecoutant 5271f89c82 Add I2C_ASYNCH capability for DISCO_F469NI 2016-11-07 11:45:46 +01:00
ccli8 2922de8dff [NUC472/M453] Remove dead code in device.h 2016-11-07 10:59:42 +08:00
jeromecoutant 36740a1fdf NUCLEO_F410RB: Add I2C_ASYNCH capability
It has disappeeared with https://github.com/ARMmbed/mbed-os/pull/2765
2016-11-04 14:08:42 +01:00
Sam Grove 0ace7955b0 Merge pull request #3104 from OpenNuvoton/nuvoton
[NuMaker] Support CAN and fix PWM CLK error
2016-11-03 18:46:58 -05:00
Sam Grove 1f783f69fa Merge pull request #3177 from ashok-rao/new_mcu_K22512_fixing_PR_3136
New mcu k22512 fixing pr 3136
2016-11-03 02:21:31 -05:00
Sam Grove ee992b0a7a Merge pull request #3151 from NXPmicro/Add_K82_Support
Add support for FRDM-K82F
2016-11-03 02:16:08 -05:00
Sam Grove 6712ed1b71 Merge pull request #3099 from maximmbed/max32625
MAX32625
2016-11-03 02:15:43 -05:00
Jeremy Brodt 213a0891dd [MAX32625] Removed progen from target configuration. 2016-11-02 09:58:17 -05:00
Jeremy Brodt 0784f0315c [MAX32625MBED] Adding new Maxim Integrated target. 2016-11-01 09:46:51 -05:00
Jeremy Brodt 1e5466a114 [MAX32625NEXPAQ] Adding new Maxim Integrated target. 2016-11-01 09:46:51 -05:00
Ashok Rao 80be092b86 Incorporating Brian Daniel's review comments for PR 3136 2016-11-01 11:47:22 +00:00
Sarah Marsh b3bc7f2529 Add a device_name to microbit entry in targets.json 2016-10-31 18:01:58 -05:00
Steven Cooreman a0f62b1e4f [EFR32] Move the mbedTLS hardware acceleration code to EFR32 family 2016-10-28 11:11:58 -07:00
Martin Kojtal 6eac2b008a Merge pull request #3009 from pradeep-gr/master
TRNG enabled. TRNG APIs implemented. REV A/B/C/D flags removed. Warnings removed
2016-10-28 10:13:50 +02:00
Steven Cooreman 035c08dcfd [EFR32] Add initial support for EFR32
Adding target definitions and the HAL implementation for EFR32 Mighty Gecko
2016-10-27 23:26:27 -07:00
Steven Cooreman 5a885137f0 [EFM32] Move board controller pin setting to config system 2016-10-27 23:21:39 -07:00
Mahadevan Mahesh 1ac09d3a19 Add support for FRDM-K82F
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2016-10-27 11:27:24 -05:00
0xc0170 8c4e6a42aa Targets- NUMAKER_PFM_NUC47216 remove mbed 2
crypto failures due to mbedtls dependency
2016-10-27 10:36:28 +02:00
Martin Kojtal c9c6428598 Merge pull request #3122 from SiliconLabs/SiliconLabs-cleanup-rebase
[Silicon Labs] Update of Silicon Labs HAL
2016-10-27 09:56:16 +02:00
Martin Kojtal 69a7481f26 Merge pull request #3085 from jeromecoutant/PR_LP_F303ZE
Add LOWPOWERTIMER capability for NUCLEO_F303ZE
2016-10-26 13:55:57 +02:00
pradeep-gr 4e4823053a To resolve conflict 2016-10-26 15:00:19 +05:30
Marcelo Salazar 739ff674fc Folder re-org to fit new MCU K22F variances
This is a simple re-structure of the K22F folder to allow other MCU
variances to land here.
Created the MCU_K22F512 device but left the 'K22F' as a target for
the FRDM-K22F board.

Rebased to master
2016-10-26 10:29:15 +01:00
pradeep-gr b6e06bd04b LOAD_ADDRESS added 2016-10-26 14:43:21 +05:30
Martin Kojtal e2efb35723 Merge pull request #3011 from RobMeades/master
Add u-blox Sara-N target.
2016-10-24 18:33:22 +02:00
Steven Cooreman 0b6ed71626 [EFM32] Move clock configuration to target settings
Moving the per-board clock configuration (which oscillators are available on the board, their frequencies, and which ones to use) as config options to the target database. This way, they're more easily overridable when third parties start creating boards with EFM32 MCUs
2016-10-24 18:29:25 +02:00
Steven Cooreman c60dacfccf [EFM32] Fix typo to targets.json 2016-10-24 18:25:34 +02:00
Steven Cooreman 4df6986100 [EFM32] Use targets.json to improve directory structure
Now that we have targets.json, we get target inheritance and can use it to clean up the EFM32 folder structure.
* In the top-level EFM32 folder, there are now folders per MCU family (Giant, Leopard, ...)
* Those family folders contain the CMSIS headers in the 'device' subfolder, as well as global family headers (i.e. mapping of pins to peripherals)
* Inside of the family folder, there is a per-target folder containing target settings. In the future, we'll want to get rid of those by using the config system provided by targets.json
2016-10-24 18:24:49 +02:00
Steven Cooreman 6574f4d0a4 [EFM32] Clean up per-target Modules.h
Removed deprecated defines MODULES_SIZE_* and moved the setting for the SPI asynch transfer queue size to targets.json, where it apparently belongs
2016-10-24 18:24:33 +02:00
jeromecoutant eb812a1887 Add LOWPOWERTIMER capability for NUCLEO_F303ZE 2016-10-20 15:02:06 +02:00