- PHY default configuration can be changed
- AutoNegotiation
- Speed
- DuplexMode
- PHY register offset can be updated depending on chosen PHY
All unused parameters are cleaned.
Previous change that removed string-based APIs missed
`NetworkStackWrapper::get_ip_address`. Remove string-based method (which
is not overriding anything in `NetworkStack`) and add missing binary
form to implement `NetworkStack::get_ip_address`.
The rather fiddly `nsapi_create_stack` template + overloads used during
socket formation don't inline their core, which is the identity operation
for `NetworkStack *` itself. Make code generation easier by having that
core be inline.
DISCO_F769NI EMAC driver may return ethernet packet with illegal
length when driver is under heavy load. In one case, the received
bytes indicate frame length of 53 bytes but advertised data length
was 65518 bytes. In another case EMAC driver variable
`EthHandle.RxFrameInfos.length` contained value 0xFFFF FFFC.
As a work-around accept only 1-1500 bytes long ethernet packets.
ARCH_MAX board uses 0x01 as PHY address, different from other NUCLEO STM32 boards. To faciliate change of PHY address of customized boards, a configuration entry eth-phyaddr was added and can be overriden as needed in mbed_app.json by adding "stm32-emac.eth-phyaddr": X. Macro ETH_ARCH_PHY_ADDRESS was also renamed to ETH_PHY_ADDRESS, because it is not only used by ARCH_MAX board but also other boards.
Issue: udp_sendto() Fails for multicast IPV6 packet when interface is switched from SoftAP to STA mode.
When SoftAP start is called, add_ethernet_interface() will be called internally to add interface details into netif_list.
When switching from SoftAP to STA mode, add_ethernet_interface() will be called again to append the interace details into netif_list.
When udp_sendto() is called, ip6_route() will return interface as NULL since it consider device as single interface.
Fix: SoftAP mode Stop, call remove_ethernet_interface() to remove the interface from the netif_list.
Some parts of PPP debug traces were enabled also on non-debug builds.
Now they are correctly disabled. Corrected also compiler warnings
that became visible when trace macros were flagged (if clauses without
brackets).
All targets must implement soft_- and hard_power_on/off() functions which are practically same what onboard_modem_api offered.
These were seen as a duplicate features and therefore we removed this.
All targets involved have been updated to reflect the changes
According to [3GPP-TS_24.008] the maximum size for Non-IP link MTU is 1358 octets to prevent fragmentation in the backbone network.
Therefore reduced the maximum size to follow the standard.
Dustin Crossman
Martin Kojtal
jeromecoutant
Kimmo Vaisanen
Kevin Bracey
Arto Kinnunen
Zhiyonh Li
midd
Michal Paszta
Arun S
Anna Bridge
Mirela Chirica
Caleb Szalacinski
Mika Leppänen
Ari Parkkila
Antti Kauppila
Marcin Tomczyk