Encourage the usage of consistent types (there are currently
a mix of `int` and `unsigned int` used for qspi instructions)
QSPI commands are limited to 8 bits, to this is a typdef to char
Update to follow the same `goto exit_point` pattern that is used
by the rest of the functions to avoid leaving the mutex locked
when errors are detected and require the function to abort.
This is related to https://github.com/ARMmbed/mbed-os/issues/11256
When TARGET_PSA is enabled on Cortex-A boards, the SECURE
is redeclared. So to minimize the impact we can redeclare this in
val.h which is used only by Mbed. And `security_t` itself is used in
mbed-os\components\TARGET_PSA\TESTS, but the SECURE string is not used.
Renamed to `caller_security_t` which aligns with
https://github.com/ARM-software/psa-arch-tests
Propagate separate alt cycle and dummy cycle counts from QSPIFBlockDevice
down to the qspi driver, so that drivers which handle the two separately have
enough information to do so.
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
All current PSoC 6 targets support the same QSPI frequency and minimum
program size. So specify a single entry rather than duplicating for
each device.
All logs now:
- start with a function name (it is not automatically logged by the logger)
- do not contain class name (this can be inferred from log preamble)
- message starts with a capital letter and ends with a full-stop
`ATCmdParser::recv()` should be used when we skim through data trying to look for something and `ATCmdParser::scanf()` is to be used when we know what we are supposed to get- as in `_oob_*` functions, except from `_oob_connection_status()`
`ESP8266Interface::connect()` and `ESP8266Interface::disconnect()` can be used in terms of asynchronous operations. Mainly, it is based on newly added private variable of type `esp_connection_software_status` which is used to keep tracking of state of connection.`wifi_connect_nonblock` test was renamed and amended to test both `connect()` and `disconnect()` operation
If psa_attestation_inject_key() is called twice, exit with a non-fatal
error status without attempting to create another attestation key. The
key already exists and doesn't need to be added again.
In custom wiring, there can be a power pin to power on/off the modem. This
commit supports it and allows for the following configurations:
- power pin name
- power pin polarity
- power on/off delay time
Make the service implementation use the same names as the API as
declared in the crypto.h header. This improves readability and
maintainability of the service.
PSA_CRYPTO_INIT is defined as a service identifier. We don't need to
redefine it as a secure function. There is only one function under this
service identifier, so no secure function definitions are necessary to
differentiate between.
Make crypto_struct_ipc.h (for use with PSA Crypto clients) match style
with the file it is based on, crypto_struct.h (from Mbed Crypto). This
helps to keep the file diff minimal so it's easy to see the meaningful
(non-style) changes.
We'll use the new ARM-software/psa-arch-tests directly instead for PSA
Crypto API 1.0b3. This commit removes the crypto compliance tests only
for now, leaving attestation and storage tests.
Separate drivers, events, and rtos internal APIs from public APIs.
* Move source files to source subdirs
* Move internal headers to internal subdirs
* Add Doxygen comments for documenting internal and public APIs
* Remove source code from header files in order to remove include pre-processor directives
that included header files not directly used by said header files
* Explicitly include header files instead of implicit inclusions via third-party header files.
Release Notes
This will break user code that was using an internal API as the internal header files have been moved.
This will only break if the user was including the header file using a namespace (i.e #include "foo/bar.h" instead of #include "bar.h"
- Add the no confidentiality & no replay protection flags
- Add actual size parameter in PS/ITS get APIs
- Change a few size parameters from uint32_t to size_t
Fix warnings due to unused variables, comparison between signed and
unsigned. This patch also re-enables I2C asserts that were disabled
during early development.
Static keyword causes problems when trying to use force-inlined
functions from normal inlined functions. This is not legal:
static inline void forced() { }
inline void normal() { forced(); }
You cannot reference internal-linkage things from external-linkage
inline functions.
Removal of the static implies that in C there would need to be a
non-inline definition in case anyone calls it non-inlined, but if the
force attribute is doing its job, that should not happen.
Only significant in-tree user of the MBED_FORCEINLINE macro is
the atomic operations - making this change permits atomic operations
from non-static inline functions.
- Link to bug tracking: https://developer.trustedfirmware.org/T240
The issue is fixed by TF-M team. However they autogenerate region details
(code, ro, rw, zi and stack ) using linker scripts and in mbed-os we
also autogenerate region details but using mix of service definition in
json file and other template files.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
compiler errors as mbed-cli only generates "-D" macros only for
"macros" defined in targets.json
TF-M task link: https://developer.trustedfirmware.org/T396
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
stmod_cellular component library adds up support for cellular modem that
are connected to the STMOD+ connector.
Currently supported modems are BG96 and UG96.
- Remove un-needed files
- Disable printf and uart
- Modify include paths
- Guard macros from mbed_lib with ifndef
(cherry picked from commit 1f30b52488)
(cherry picked from commit 71cd34df32)
(cherry picked from commit 185d2865da)
(cherry picked from commit fb068d2cb4)
It has been found that there is a problem with the new K66F SPI driver when clock polarity is high.
After setting clock polarity to high SCLK line is still low. When transmission starts and CS is asserted (in case of manual CS handling) SCLK signal is invalid (low). After first transfer SCLK idle state becomes high.
SPI implementation on FPGA test shield is resistant on this bug and transmission is successful. The problem has been found on two boards communication test where transmission fails.
The idea is to add support to the FPGA test shield to catch such errors and verify this in the test.
Martin Kojtal
toyowata
Kyle Kearney
Matthew Macovsky
jeromecoutant
Jarkko Paso
Anna Bridge
Maciej Bocianski
Vikas Katariya
Ben Cooke
Dominika Maziec
int_szyk
Tymoteusz Bloch
Veijo Pesonen
Hugues Kamba
Jaeden Amero
Chun-Chieh Li
Antti Kauppila
Desmond Chen
Michal Paszta
Pavel Slama
Seppo Takalo
Filip Jagodzinski
Lin Gao
Kevin Bracey
David Saada
Russ Butler
Arto Kinnunen
Marcin Tomczyk
Devaraj Ranganna
Laurent Meunier
Christopher Haster
Marten Lootsma
Qinghao Shi
Michael Schwarcz
Marten Lootsma
Przemyslaw Stekiel