Cruz Monrreal
69d8c0bac3
Merge pull request #7429 from codeauroraforum/MXRT_Fix_AnalogIn
...
MXRT1050: Ensure the pins are in input mode for analogin
2018-07-06 11:24:40 -05:00
Mahesh Mahadevan
19b6ef2e87
MXRT1050: Ensure the pins are in input mode for analogin
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-05 17:23:07 -05:00
Mahesh Mahadevan
c24d158fb4
MIMXRT1050_EVK: Move clock enable after check of pin
...
Enable clock could return an error if pin is NC
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-05 10:59:00 -05:00
Mahesh Mahadevan
9b48f3978a
MIMXRT1050_EVK: Fix the GPIO IRQ number assignements
...
Use the GPIO_Combined IRQ array
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-04 11:53:47 -05:00
Mahesh Mahadevan
34dab4a4d9
LPC546XX: Fix UART mux setting in the LPCXpresso board
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-02 15:16:57 -05:00
Mahesh Mahadevan
632892d355
MIMXRT1050: Update to EVK Rev B
...
1. Add the IVT header to the binary as this is required for boot up
This was earlier added by the DAPLink firmware. As it is no longer
handled in DAPLink, the header needs to be added inside mbed.
2. Update drivers
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-06-21 13:34:12 -05:00
canhkha
c64971c100
Fix lpc43xx serial pin map compiling error
2018-06-20 13:59:48 +07:00
Cruz Monrreal
31df3d2865
Merge pull request #7242 from davidsaada/david_uniform_text_region
...
Rename text region in ARM linker file for a few NXP CPUs
2018-06-19 09:45:23 -05:00
Cruz Monrreal
f2b72b9914
Merge pull request #7201 from codeauroraforum/Fix_ADC_LPC54628
...
LPC54628: Update the ADC clock divider based on the input clock source
2018-06-18 10:08:38 -05:00
David Saada
714d025f6c
Rename text region in ARM linker file for a few NXP CPUs
2018-06-18 17:32:01 +03:00
Mahesh Mahadevan
8c6098229b
LPC54628: Update the ADC clock divider based on the input clock source
...
1. Problems were seen on the LPC54628 as the ADC clock source was too
high
2. Moved the pin configuration to set Analog mode to the end of the
function
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-06-12 12:57:31 -05:00
David Saada
9e5efbcfd5
Fix flash_program_page API in LPC boards.
...
This API allocates a program buffer of 256 on the stack to ensure alignment.
However, FlashIAP driver already ensures this alignment of the user data.
2018-06-12 15:09:05 +03:00
Wilfried Chauveau
1c7b91aa8c
us_ticker is not yet initialised at this stage
2018-05-30 15:01:18 +01:00
Bartek Szatkowski
a305d849a8
Rename LOWPOWERTIMER to LPTICKER
2018-05-25 13:06:56 -05:00
Mahesh Mahadevan
f7c6e555f3
MCUXpresso: Enable RTC on LPC54114 and LPC546XX
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-05-25 13:03:46 -05:00
Mahesh Mahadevan
fb622a2081
MIMXRT1050_EVK: Update lpticker implementation
...
Use only the GPT module and avoid using RTC.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-05-25 12:33:41 -05:00
Mahesh Mahadevan
774de11d1f
MCUXpresso: Enable usticker on MIMXRT1050_EVK
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-05-25 12:32:38 -05:00
Mahesh Mahadevan
659be61e4b
MCUXpresso: Enable usticker for LPC546XX and LPC54114
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-05-25 12:32:38 -05:00
Mahesh Mahadevan
870600400d
LPC1768: Enable usticker
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-05-25 12:30:53 -05:00
Bartek Szatkowski
6e9f04bf2f
Rename DEVICE_LOWPOWERTIMER to DEVICE_LPTICKER
...
That's to match DEVICE_USTICKER.
2018-05-25 12:20:09 -05:00
Martin Kojtal
b7682183b8
Sleep: add time requirements for sleep
...
Sleep - within 10us
Deepsleep - within 10ms
Note about mbed boards with interface, moved to lpc176x, as they are target related,
should be documented in the target documentation.
The tests will come as separate PR, to conform to this updates to sleep API.
2018-05-25 12:03:37 -05:00
Kevin Bracey
97b9980c8c
LPC546XX: Correct Ethernet MAC address write
...
Patch to LPC546XX SDK code - write the low Ethernet MAC address
register last, as that synchronises the update.
Without this change, the ENET_SetMacAddr call only seems to work prior
to MAC initialisation, causing problems for the new mbed OS EMAC system,
which expects it to be changable later.
Updated emac greentea tests #6851 .
2018-05-23 12:25:21 +03:00
Cruz Monrreal
4e1c04feba
Merge pull request #6734 from codeauroraforum/Fix_LPC54XXX_GPIO
...
LPC54XXX: Set the pin function to Digital mode
2018-04-26 20:17:07 -05:00
Mahesh Mahadevan
6513091173
LPC546XX: Add check for GPIO IRQ
...
GPIO IRQ is available on pins for Ports 0 & 1. Add
a check to return error for other ports.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-04-24 14:26:20 -05:00
Mahesh Mahadevan
2670f790ce
LPC546XX: Set the pin function to Digital mode
...
We cannot rely on the default value as a pin could
be use for Analog purposes in which this bit is cleared
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-04-24 11:24:23 -05:00
Martin Kojtal
cba28cc0ac
Merge pull request #6221 from codeauroraforum/Add_RNG_LPC54XXX
...
LPC546XX: Add TRNG support
2018-04-18 14:25:56 +02:00
Cruz Monrreal
1cc78f864c
Merge pull request #6647 from codeauroraforum/Fix_LPC54xxx_I2C
...
Fix MCUXpresso LPC I2C driver
2018-04-17 10:56:10 -05:00
Cruz Monrreal
7489401044
Merge pull request #6468 from codeauroraforum/Fix_DeepSleep_Implementation
...
Fix deep sleep implementation
2018-04-17 10:53:27 -05:00
Mahesh Mahadevan
6e9f99ca93
MCUXpresso: Fix LPC I2C driver for byte operations
...
The ci-shield tests that manually generate the START, STOP
by calling the HAL functions were failing. The byte operation
HAL functions cannot use the MCUXpresso SDK driver API's.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-04-16 16:35:34 -05:00
Mahesh Mahadevan
69a950c6eb
MCUXpresso: Fix SDK LPC driver
...
Poll the Pending bit after START and STOP operations to ensure
operation completion.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-04-16 16:35:34 -05:00
Cruz Monrreal
4ff1a49d17
Merge pull request #6541 from jorisa/lpc11c24-spfix
...
Add mbed-os 5 build support for LPC11C24
2018-04-16 10:45:06 -05:00
Andreas Rebert
01d06a9f51
LPC4088: Fix hardfault occuring after power-cycle
...
Since revision 5499db1
(mbed-os-5.6.0) a hardfault occurs after a power-cycle.
It doesn't occur after a reset when the application has been downloaded using
drag-and-drop or via debugger. This is probably the reason why this problem
isn't detected when testing new mbed releases.
The hardfault occured in hal_sleep(). Adding a __NOP after __WFI solves the
problem although I don't fully understand why.
- Revision ca661f9
is the last revision where the problem doesn't occur.
- The problem doesn't occur when compiling with GCC instead of ARM compiler
- This issue describes a similar, but not identical problem and led me to test adding a __NOP: https://github.com/ARMmbed/mbed-os/issues/5065
2018-04-11 11:13:43 +02:00
Mahesh Mahadevan
9a1e749780
LPC546XX: Fix deepsleep implementation
...
Add a check to return to 220MHz on LPC54628
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-04-10 08:16:41 -05:00
Joris Aerts
f8a06640c1
Add mbed5 build support for LPC11C24
2018-04-03 16:45:16 +02:00
Mahesh Mahadevan
76c8a1bf7e
LPC546XX: Add TRNG support
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-03-30 14:12:39 -05:00
toyowata
3acdc81e6d
Add alignment check in the flash_program_page
...
* Add source address word alignment check
* malloc and memcpy are called only if data is unaligned
* malloc size is now copySize (program page size), rather than whole buffer to be written
2018-03-27 23:04:26 +09:00
toyowata
d76d511969
LPC176X: Fix flash program size
...
This patch fix flash write issue when program size is more than page size (= 1024 bytes). See detail - https://github.com/ARMmbed/mbed-os/issues/6165
Source data always use aligned data in heap memory.
2018-03-21 18:36:16 +09:00
Cruz Monrreal
95fb33f041
Merge pull request #6198 from codeauroraforum/Add_LPC54XXX_Flash_Support
...
Flash support: Add flash support for LPC54114 & LPC546XX
2018-03-15 10:49:08 -05:00
Cruz Monrreal
5523d53f83
Merge pull request #6287 from codeauroraforum/Update_usticker
...
MCUXpresso_MCUS: Apply K64F us_ticker fix across all MCU's
2018-03-14 13:56:34 -05:00
Martin Kojtal
7917e12eb0
MIMXRT: define PullUp default value
...
This target defines few PullUp values, one should be defined to be PullUp that
an application can use. We use the same value as PullDefault
2018-03-12 09:21:24 +00:00
Mahesh Mahadevan
3f302961e1
Flash support: Add flash support for LPC54114 & LPC546XX
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-03-07 13:06:41 -06:00
Mahesh Mahadevan
7ed36e4986
MCUXpresso_MCUS: Apply K64F us_ticker fix across all MCU's
...
Applied changes from commit b6a01de070
for other MCUXpresso MCUs
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-03-07 07:27:04 -06:00
gorazd
c053b70a75
lpc546xx and lpc54114: fix clock
2018-02-28 13:23:38 +01:00
Mahesh Mahadevan
eff848abea
LPC546XX: Update SDK driver to version 2.3
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-02-23 07:31:13 -06:00
Mahesh Mahadevan
069c80b7a5
ff_lpc546xx: Add support for 220MHz core speed.
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-02-22 07:30:20 -06:00
Mahesh Mahadevan
a9cd4705d8
LPC546XX: Add support for 220MHz core speed available on LPC54628
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-02-22 07:30:19 -06:00
Cruz Monrreal
964e6e74fb
Merge pull request #5826 from codeauroraforum/Add_iMXRT_Support
...
NXP: Add support for MIMXRT1050_EVK
2018-02-05 10:15:17 -06:00
Mahesh Mahadevan
060daa99c9
NXP: Add support for MIMXRT1050_EVK
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-01-26 07:46:43 -06:00
Serge Camille
63664e11b9
NXP LPC4088: Add missing SPI SSEL pin to Pinmap
...
The Pin P5_3 (p31) was missing from the NXP LPC4088 SPI PinMap for SSEL.
Adding this Pin allows usage of SPISlave with SSP2 using the SSEL pin.
The pin and its SSP2_SSEL function is both documented in https://os.mbed.com/media/uploads/embeddedartists/lpc4088_qsb_pinning.xlsx as well as in UM10562 LPC408x/407x User manual Rev. 3 — 12 March 2014 chapter 7.4.1.4 Table 90 (https://www.nxp.com/docs/en/user-guide/UM10562.pdf ).
2018-01-24 13:29:43 +01:00
gorazd
676e56d6fe
ff_lpc546xx: change led1 and led3 and p26 pins
2018-01-01 15:55:25 +01:00