Remove the direct use of the microsecond and low power ticker from
the tests. This enforces that sleep mode is properly locked when
using timers. Furthermore, this prepares the codebase for new ticker
changes which allow differing clock frequencies and timer bit widths.
STM32F439xI-family MD5, SHA1 and SHA256 hardware acceleration
occasionally produces incorrect output (#5079).
Don't enable MD5, SHA1 and SHA256 HW acceleration on STM32F439xI-family
targets by default until issue #5079 is fixed.
In order to apply the same mode in case of reset, we store the current
requested mode in the HAL structure.
To make storage in a single place, we also change can_monitor to call
can_mode function as they actually acting on same registers.
After reset the MCR register content needs to be restored so we're
introducing the can_registers_init function to be called at the first
init stage, but also after reset. We also store the can frequency to
go through the initialisation phase again.
Instead of a static object, this will make driver
instantiation more robust and allow to re-use init
configuration on a need basis.
The CANName struct member is actually the CAN registers base address,
which is now available in the CanHandle.Instance field, so we don't need
CANName anymore.
commit f7bc126 (Re-work Rtl8195AM ticker) tried to address ticker drifting
issue, but in fact broke ticker functionality. This patch adjusts us_ticker
porting to unbreak it, and to fix the following tests:
mbed-os-tests-mbed_drivers-ticker
mbed-os-tests-mbed_drivers-timeout
mbed-os-tests-mbedmicro-rtos-mbed-isr
mbed-os-features-frameworks-utest-tests-unit_tests-minimal_async_scheduler
mbed-os-features-frameworks-utest-tests-unit_tests-case_control_async
mbed-os-features-frameworks-utest-tests-unit_tests-case_async_validate
Changes are:
1. Dont disable timer after every us_ticker interrupt. That basically
breaks ticker functionality.
2. Fine-tune us to tick conversion macro. Previous conversion method
yields 1 tick drift every 2 ms.
3. Remove special placement of ticker objects. No longer necessary.
Signed-off-by: Tony Wu <tonywu@realtek.com>
ARMC6 support required ARM compiler support as mandatory requirement which
should not be the case. Cortex-M23/M33 devices are not suuported by ARM compiler5
Adding ARMC6 without ARM in target.json should work now.
From C++11 and beyond string literals must be seperated by space
so that they are recongizable as seperate tokens.
Context macro in PPPCellularInterface (CTX) has been causing issues
as it was not augmented with a space from a nearby string literal.
Christopher Haster
Russ Butler
Andres Amaya Garcia
adustm
Laurent MEUNIER
Tony Wu
Arto Kinnunen
Jimmy Brisson
Yuguo Zou
Deepika
Hasnain Virk
Shrikant Tudavekar
Jaeden Amero