Add configuration to control Ethernet, PPP and TCP support.
Replaces LWIP_TRANSPORT_ETHERNET/PPP defines formerly used by targets.
Ethernet and PPP can be enabled simultaneously.
DHCPv4 is now only enabled if IPv4 and Ethernet are both enabled - we
assume PPP uses IPCP for configuration.
PPP configuration adjusted to cope with LWIP 2.0 changes, and
optimised for RAM a little.
This is a glue layer between LWIP PPP implementation and a device type FileHandle
stream. This enables an external interface which has a FileHandle, utilize LWIP network
stack via PPP, e.g., Cellular device, WiFi chips etc.
Its totally transparent to external device. Only thing this layer is interested in, is a
FileHandle. Similar is true for for the external device, it just hands over its stream to this
PPP layer and rest of the magic is done by this layer.
Use a newer version of uVisor that doesn't change the box main thread
function type. Previously, we required all box main thread definitions
to change from taking a `const void *` to a `void *` when moving to
RTX5. We now are backwards compatibile.
- Implicit MBR still allowed during mount
- maintains storage compatibility
- Not needed
- MBR utility is not exposed through the FAT filesystem,
so the only used partition was always the first. Omitting
the MBR is functionally equivalent
- Saves a few blocks on storage for MBR + offset
for FAT alignment
- Duplicated with MBRBlockDevice
- The implicit MBR actually prevents nesting a FAT filesystem
in the MBRBlockDevice
Thread device needs to wait for connectivity:
-routers will create new network and get local connectivity
-end device will get connectivity once attached to existing network
-devices without network settings gets connectivity once
commissioned and attached to network
Reduce RAM consumption so all tests can still be built when using
CMSIS/RTX5. Also reduce clutter by removing the per target stack size
defines in the tests.
Remove all unsupported net libraries from features/unsupported. There's already lwip for mbed OS that we support, and cellular will come soon to the codebase reworked.
Plus remove unsupported/tests for these libraries.
lwip now uses mbed client random library under common pal when available.
Ported lwip reference TCP initial sequence number handling to mbed-os
lwip stack. Handling is based on RFC 6528.
s140 headers renamed form ble_* to nrf_ble_*,
Removed s130 and s132 headers named form ble_*
(Them had been added by #2ff572682798562e812015dc775b5896e0fda5a4)
Headers inclusinons were changed in order to meet above changes.
Revrted bad change in us_ticker.c:
use __disable_irq lock instead of core_util_critical_section_enter lock
for setting rtc1 tick for systick emulation as was good before.
Observed during investigation of
https://github.com/ARMmbed/mbed-os/issues/4246 - DNS queries sent
the entire buffer, not just the bit filled in.
Inefficient, especially for 6LoWPAN, and a security hole - the trailing
data could be previously-used heap.
mbed_lwip_set_mac_address calls mbed_mac_address to get hwaddr
from device, but device may not be accessible until it is powered
up and initialized.
This patch delays mbed_lwip_set_mac_address call until device is
ready.
Signed-off-by: Tony Wu <tonywu@realtek.com>
Copy of changes from
features/FEATURE_BLE/targets/TARGET_NORDIC/TARGET_NRF5_SDK13/source
to
features/FEATURE_BLE/targets/TARGET_NORDIC/TARGET_NRF5/source
Minor change - List of key modifiers updated to include the
logo/GUI/windows key. Also added the options to specify the right hand
versions of the keys rather than just the left if for some reason
someone wants to do this.
Changes are limited to the keyboard header file and are backwards
compatible.
The new modifier values are in line with the table given on page 56 of
this document http://www.usb.org/developers/hidpage/HID1_11.pdf
1. added call to busReset() to KL25Z HAL; now the USB stack survives if you disconnect the cable, similar to LPC40 2. busReset callback to update terminal_connected in USBCDC 3. new bool USBSerial::connected() to read protected terminal_connected property, useful when you want to check if the terminal is ready from main app
The standard is intentionally vague on if filesystems must
have '.' and '..' entries, allowing filesystems to omit this
concept completely:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/readdir.html
However, the '.' and '..' entries are common on FAT filesystems
and in most other filesystems.
This enables '.' and '..' entries in the FAT filesystem.
Define tcpip-thread-stacksize and default-thread-stacksize in
lwip's mbed_lib.json, and use them accordingly in lwipopts.h.
Signed-off-by: Tony Wu <tonywu@realtek.com>
Kevin Bracey
Sam Grove
Bartek Szatkowski
Jaeden Amero
Christopher Haster
Jimmy Brisson
Kari Severinkangas
Seppo Takalo
Hanno Becker
Arto Kinnunen
Yogesh Pande
Martin Kojtal
Michel Jaouen
Andrzej Puzdrowski
adustm
jeromecoutant
Mika Leppänen
Anna Bridge
0x6d61726b
Mihail Stoyanov
Tony Wu
Tony Wu
Alessandro Angelino