This patch implements pin_function and gpio_set
with some fixes in the PinNames.
The patch also updates the serial and spi
drivers to use the pin_function.
Signed-off-by: Marc Moreno <marc.morenoberengue@arm.com>
1. Add startup code and linker script for IAR and
GCC_ARM compilers.
2. Enable IAR and GCC_ARM compilers in targets.json.
Change-Id: I742a89ae73a4e5ede980a8af0821c3f0e5a461ef
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>
Based on lwip_ethernetif.c skeleton file,
use init, receive and transfer
functionality of SMSC9220 Ethernet driver
for the lightweight IP stack.
Receive mechanism is interrupt driven.
HW buffer sizes:
Tx = 4608 bytes (MTU)
Rx = 10560 bytes
lwIP fine tuning:
mbed-os/features/FEATURE_LWIP/lwip-interface/lwip/src/include/lwip/opt.h
Change-Id: I0ea95650c65fb32cafb5c2d3dde11420c61dba66
Signed-off-by: Gabor Kertesz <gabor.kertesz@arm.com>
- Creates new target in targets.json
- Creates device specific files under ARM_SSG/CM3DS_MPS2 directory
- Driver layer files under CM3DS_MPS2 are based on Beid target
- Device specific files under CM3DS_MPS2/device are based on CMSIS_5 and Beetle
Change-Id: I29ea7a7f42b11cf25b516cce4b9255ab828ca019
Signed-off-by: Tamas Kaman <Tamas.Kaman@arm.com>
Signed-off-by: Marc Moreno <marc.morenoberengue@arm.com>
Restore cmsis_nvic (cmsis_nvic.c and cmsis_nvic.h) files for the
implementations which use a mechanism other than the VTOR to set
interrupts. These are vendor specific and were done for M0 devices
which do not have a VTOR.
Note - There were two cmsis_nvic files which did not use the VTOR that
which not restored in this patch. This is because these targets were
not M0 devices and could use the new unified implementation instead.
These files are:
targets\TARGET_ARM_SSG\TARGET_MPS2\TARGET_MPS2_M0P\device\cmsis_nvic.c
targets\TARGET_ONSEMI\TARGET_NCS36510\device\cmsis_nvic.c
Note - cmsis_nvic.c and cmsis_nvic.h were initial removed in
(and restored from) the commit:
b97ffe8fdc -
"CMSIS5: Replace target defined NVIC_Set/GetVector with CMSIS implementation"
There is an easy default implementation of spi_master_block_write that
just calls spi_master_write in a loop, so the default implementation
of spi_master_block_write has been added to all targets.
Affected boards: NRF51_DK, NRF52_DK, Beetle. This change is temporary and
will be overwritten by RTX update. It's necessary for the boards to pass
updated tests.
Add sleep/deepsleep functions to platform layer which are replacing HAL
functions with the same name, rename existing symbols in HAL layer
to hal_sleep/hal_deepsleep. This way sleep functions
are always available, even if target doesn't implement them, which makes
the code using sleep clearer. It also enables us to make decision on in
which builds (debug/release) the sleep will be enabled.
This patch updates DualTimer_DisableInterrupt to
disable the interrupt timers individually.
In addition, it updates lp_ticker accordingly.
Signed-off-by: Marc Moreno <marc.morenoberengue@arm.com>
Marc Moreno Berengue
Sam Grove
mattot01
Tamas Ban
gabker01
Tamas Kaman
Russ Butler
Bartek Szatkowski
Christopher Haster
Martin Kojtal
Brian Daniels