- Add the no confidentiality & no replay protection flags
- Add actual size parameter in PS/ITS get APIs
- Change a few size parameters from uint32_t to size_t
During the SiP workshop, we discovered that 3% is too narrow due to a combination of:
Voltage rail differences between target and FPGA
Extension of lesser-resolution ADC's to 16-bit results
The test case which checks full range cannot be executed at the moment due to a hardware bug in FPGA-Test-Shield.
This test case will be restored when the final version of FPGA-Test-Shield is ready.
Watchdog::stop() is called in this test. If the target does not support
stopping the watchdog this case needs to be skipped.
Also improve handling ignored test cases.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Use a SERIAL_FLUSH_TIME_MS value consistent with other tests.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Remove explicit calls to sleep.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
With the DEEP_SLEEP_TEST_CHECK_WAIT_DELTA_US increased,
we now have TEST_ASSERT_UINT64_WITHIN(delta=1000, expected=1000, actual=1000)
so this assertion needed to be updated.
What we need is the deep sleep to be enabled after the programed interrupt
has fired and before a 2ms timeout expiration, which means >= 1000 and < 2000.
Running PowerShell script on some windows machines is blocked.
To avoid this problem script was replace by the code run directly in PowerShell console.
Changes:
- restore the original form of setup/teardown handlers,
- test_lock_unlock_test_check(): do not use common ticker layer (Timer, Timeout). Use only ticker HAL layer.
- Increase DEEP_SLEEP_TEST_CHECK_WAIT_DELTA_US delta.
Added a mechanism which will prevent an initialised watchdog from
resetting the device during final greentea communication.
This allows testing watchdog timeouts as short as 50 ms.
As the timer code became more generic, coping with initialization on
demand, and variable width and speed us_ticker_api implementations,
wait_us has gradually gotten slower and slower.
Some platforms have reportedly seen overhead of wait_us() increase from
10µs to 30µs. These changes should fully reverse that drop, and even
make it better than ever.
Add fast paths for platforms that provide compile-time information about
us_ticker. Speed and code size is improved further if:
* Timer has >= 2^32 microsecond range, or better still is 32-bit 1MHz.
* Platform implements us_ticker_read() as a macro
* Timer is initialised at boot, rather than first use
The latter initialisation option is the default for STM, as this has
always been the case.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
In particular and as kindly suggested by Przemec S. :
1. Add setup/teardown handler’s for all cases. This disables sys-tick,
so there should be no unexpected lp ticker interrupt scheduling.
2. Modify setup/teardown handler’s: remove suspension of lp/us tickers,
so they can count as this is required by test_lock_unlock_test_check test
case.
3. Use TEST_ASSERT_TRUE(sleep_manager_can_deep_sleep_test_check()) after
setting interrupt to cope with STM specific handling (CMPOK interrupt with
deep-sleep locked). This performs wait only if needed and will not affect
other targets which do not need extra wait.
4. Move sleep_manager_lock_deep_sleep() after TEST_ASSERT_TRUE(sleep_manager_can_deep_sleep_test_check())
5. Use TEST_ASSERT_TRUE(sleep_manager_can_deep_sleep_test_check()) in
test_lock_unlock_test_check to let lower layers manage deep sleep.
Time drifting test cases use serial communication with the host and are unstable on CI.
Skip time-drifting test cases if SKIP_TIME_DRIFT_TESTS macro is defined.
The idea for the future is to use FPGA test shield for timing tests instead of host scripts.
Also remove `__ARM_FM` macro which in most cases was used to disable time drifting tests. In other cases replace `__ARM_FM` with `TARGET_ARM_FM` which is more suitable.
Fix was to add some time between iterations connect-disconnect.
In cellular disconnect, cellular network may send disconnect events
and if those events come when connect is already ongoing test will fail.
So wait a bit after disconnect so that disconnect events should be over.
Kevin Bracey
Seppo Takalo
Arto Kinnunen
David Saada
Evelyne Donnaes
Filip Jagodzinski
jeromecoutant
Steven Cooreman
Russ Butler
Chun-Chieh Li
Martin Kojtal
Devaraj Ranganna
Przemyslaw Stekiel
Przemyslaw Stekiel
Neil Tuttle
Maciej Bocianski
Laurent Meunier
Anna Bridge
Filip Jagodzinski
Tymoteusz Bloch
d-kato
Teppo Järvelin
Lingkai Dong