8a4b88c762
Update USBTX/USBRX alias
2021-03-23 17:07:52 +00:00
b943c4474a
FPGA SPI : decrease test frequency for ASYNC test cases
2021-03-19 11:34:23 +01:00
21194f5b95
New lines
2021-03-18 17:01:54 +00:00
d239ef98cd
Rename USBTX/RX to CONSOLE_TX/RX
2021-03-18 17:01:54 +00:00
3af96247a6
Update PinNames markers
2021-03-18 17:01:54 +00:00
4dfdb11de0
Move pinvalidate files
2021-03-18 17:01:54 +00:00
885cdef5f7
Add standard pin-names validation script & tests
2021-03-18 17:01:53 +00:00
500ddf596a
[STD-PIN] Updates after review
2021-03-18 17:01:50 +00:00
d514b78bb3
[STD-PIN] hal-tests-tests-pin_names-arduino_uno
...
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A0 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A1 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A2 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A3 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A4 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A5 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A0 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A1 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A2 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A3 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A4 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A5 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D0 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D1 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D10 | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D11 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D12 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D13 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D14 | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D15 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D2 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D3 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D4 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D5 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D6 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D7 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D8 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D9 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | I2C | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D10 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D11 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D3 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D5 | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D6 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D9 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | SPI | 1 | 0 | OK | 0.08 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | UART | 1 | 0 | OK | 0.06 |
2021-03-18 17:01:50 +00:00
eca714c93f
[STD-PIN] update tests and components
2021-03-18 17:01:50 +00:00
9d453cce68
[STD-PIN] ARDUINO_UNO pins
...
- hal/include/hal/ArduinoUnoAliases.h creation
- doc update
2021-03-18 17:01:50 +00:00
a4350f72bd
[STD-PIN] BUTTON and LED define
...
hal/tests/TESTS/mbed_hal/gpio/main.cpp is replaced by
hal/tests/TESTS/pin_names/generic/main.cpp now
2021-03-18 17:01:50 +00:00
23e3bb301d
[STD-PIN] hal-tests-tests-pin_names-generic
...
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | BUTTON1 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | LED1 | 1 | 0 | OK | 1.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | LED2 | 1 | 0 | OK | 1.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | LED3 | 1 | 0 | OK | 1.04 |
2021-03-18 17:01:50 +00:00
a6c213bb10
[STD-PIN] Replace STDIO_UART_TX by USBTX
2021-03-18 17:01:50 +00:00
c45e6ce13f
Remove usage of MBED_TARGET_LABELS in hal/ tests
...
This removes some dependency on targets.json
2021-02-19 19:15:47 +00:00
7d49d4bce1
Create FLASH CMSIS ALGO target to remove dependency on MBED_TARGET_LABELS
...
This goes towards eventually removing reliance on targets.json to specify
the requirements of Mbed targets.
2021-02-19 16:56:37 +00:00
6824b14e48
CMake: rename greentea test macro
2021-02-02 07:43:40 -08:00
7d7159d20f
Apply suggestions from code review
...
Co-authored-by: Hugues Kamba <41612201+hugueskamba@users.noreply.github.com>
2021-01-08 03:21:03 -08:00
71729238f0
CMake: Add support for mbed_timing_fpga_ci_test_shield greentea test
2021-01-05 09:10:45 -08:00
d9f2d765f4
CMake: Add support for mbed_hal_fpga_ci_test_shield greentea test
2021-01-05 09:10:45 -08:00
f78d7e1fe5
CMake: Add CMake support for mbed_hal greentea test
2021-01-05 09:10:45 -08:00
4e0d07d50f
Merge pull request #12897 from kjbracey-arm/tickeropt
...
Optimise mbed_ticker_api.c
2020-11-30 16:15:37 +00:00
2f709cc13f
Merge pull request #13896 from jeromecoutant/PR_OSPI
...
STM32 OSPI support
2020-11-24 13:53:30 +00:00
57bbb4739b
Merge pull request #13085 from pea-pod/remove-deprecated-mbed-assert
...
Change MBED_STATIC_ASSERTs version for built-in
2020-11-24 13:38:07 +00:00
4d8127223c
OSPI test: dummy cycle update
2020-11-10 18:38:21 +01:00
e7c0d93ad4
CMake: add mbed-os and mbed-baremetal targets
...
mbed-os consists of mbed-core and mbed-rtos
mbed-baremetal consists of mbed-core
The main change is for mbed-core. Changing from object library to be interface. This way it allows us to do the above to have 2 main targets for users to use.
This should be backward compatible change as mbed-os target we used contains the same files/options as previously set.
2020-11-06 17:25:22 +00:00
bf84a5b329
CMake: Rename CMake targets
...
* mbed-os renamed mbed-core
* mbed-os-<COMPONENT> renamed mbed-<COMPONENT>
2020-11-06 17:25:22 +00:00
8016a53400
CMake: replace usage of the mbed_add_cmake_directory_if_labels() function ( #13754 )
...
Directories that start with special prefixes (TARGET_, FEATURE_, COMPONENT_) are added to the build based on Mbed target configuration from targets.json instead of calling utility function mbed_add_cmake_directory_if_labels().
2020-11-06 17:25:21 +00:00
44f9d176e8
CMake: Fix build due to hal dir move
2020-11-06 17:25:20 +00:00
5f53181f33
CMake: Fix access to usb hal source file
2020-11-06 17:25:18 +00:00
8f9bf40323
CMake: Add support for hal dir
2020-11-06 17:25:15 +00:00
507181d262
Change MBED_STATIC_ASSERTs version for built-in
2020-10-27 08:30:40 -05:00
21652971a5
Merge pull request #12644 from macronix/macronix_ospi
...
Add OSPI driver to support the Octa mode of Macronix octaflash MX25LM51245G
2020-09-30 16:07:20 +01:00
a02ea2f43a
Merge pull request #13623 from rajkan01/refactor_docs
...
Refactor mbed-os design docs
2020-09-21 16:28:13 +01:00
19908b2b21
Refactor hal, platform, rtos docs
2020-09-17 16:03:43 +01:00
dcf6def947
Merge pull request #13621 from rajkan01/refactor_rem_tests_dir
...
Refactor remaining TESTS related to hal, rtos, and platform dir
2020-09-17 09:08:16 +01:00
a74120ca2e
Move greentea test closure to library
2020-09-16 13:04:21 +01:00
48524f25ae
add opsi driver
2020-09-16 11:27:23 +08:00
c887290db6
Adjust ticker tests
2020-09-14 13:25:12 +03:00
65bc41a96b
Optimise mbed_ticker_api.c
...
The generic code in mbed_ticker_api.c uses run-time polymorphism to
handle different tickers, and has generic run-time calculations for
different ticker widths and frequencies, with a single special-case for
1MHz.
Extend the run-time special casing to handle any conversion cases where
either the multiply or divide can be done as a shift. This is a speed
optimisation for certain platforms.
Add a new option `target.custom-tickers`. If turned off, it promises
that only USTICKER and LPTICKER devices will be used. This then permits
elimination and/or simplification of runtime calculations, saving size
and speed. If either both USTICKER and LPTICKER have the same width, or
same period numerator or denominator, or only one of them exists, then
operations can be hard-coded. This is a significant ROM space saving,
and a minor speed and RAM saving.
We get to optimise all the calculations, but the run-time polymorphism
is retained even if there is only one ticker, as it doesn't
significantly affect code size versus direct calls, and the existence of
lp_ticker_wrapper and various us_ticker optimisations requires it, even
if only LPTICKER is available.
2020-09-14 13:25:10 +03:00
6423633122
Add documentation for LP_TICKER defines
...
They're now potentially useful, so document them as per the US_TICKER
defines.
2020-09-14 13:25:08 +03:00
c1dd8b9acd
redundant code combined
2020-09-14 13:25:06 +03:00
2bc7bb7a52
- Remove components reference from travis
...
- update readme
2020-09-11 14:33:18 +01:00
468372e759
Merge pull request #13492 from talorion/fix-PwmOut-resets-after-suspend
...
Fix pwm out resets after suspend
2020-09-10 12:40:18 +01:00
39e69d328d
Use boot stack size from config system
...
To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.
Fixes #10319
2020-09-10 10:08:38 +01:00
877078003c
Rename CY8CKIT_064B0S2_4343W to CY8CKIT064B0S2_4343W, which fits in 20 characters limit
2020-09-07 08:25:31 +03:00
e55421aaa4
pwmout - add read methods for period and pulsewidth
2020-09-02 13:39:08 +02:00
159410bea7
Move greentea tests closure to library
2020-08-25 15:15:53 +01:00
993ed3b975
Refactor hal directory
2020-08-25 14:57:07 +01:00
ff74ea41c1
Use PSA TRNG if PSA is enabled and no TRNG device defined
...
Signed-off-by: Charley Chu <haoc@cypress.com>
2020-08-07 08:02:00 -07:00
d1ae0d570c
Merge pull request #12425 from kjbracey-arm/chrono
...
C++ Chrono support
2020-04-30 11:41:43 +02:00
fcf427ac11
psa: Remove S-mode only code
...
Remove all PSA S-mode only code, as it is unused. Only PSA S targets
would use the code, and we've removed those targets in a previous
commit.
Ensure all tests for S-mode code we are deleting is also removed, even
if that code would run in NS-mode. Keep any tests that also test our PSA
emulation support (for single v7-M targets).
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
2020-04-27 09:51:13 +01:00
8f490f6f24
Use Chrono in LowPowerTickerWrapper
2020-04-27 10:19:08 +03:00
34428f9d4c
Add Chrono support to Ticker et al
2020-04-27 10:19:08 +03:00
07a84ec10a
psa: Remove MBED_SPM code
...
All MBED_SPM targets have been removed previously, via commits
5cc66282dd
2020-04-16 14:10:54 +01:00
20c3e38349
Remove the deprecated ethernet APIs
2020-03-17 06:00:07 -07:00
dc733d8883
Merge pull request #12477 from fkjagodzinski/hal-gpio-get_capabilities
...
HAL: Add a get_capabilities() function to GPIO API
2020-02-24 07:47:39 +00:00
ec836aeb3e
hal: fix SPDX identifiers
2020-02-21 07:01:02 +00:00
bcfca4fa5e
HAL: GPIO: Add the get_capabilities function
...
Add the gpio_get_capabilities() to GPIO HAL API.
Add a default, weak implementation, that every target can override.
2020-02-19 18:28:51 +01:00
0d9a54f92e
Provide pinmap_uart_restricted_peripherals() function under DEVICE_SERIAL
2020-02-10 08:17:55 +01:00
3c0982d939
Add pinmap_gpio_restricted_pins() to provide list of restricted GPIO pins
...
This is a special case since targets do not provide by default GPIO pin-maps.
This extension is required for FPGA GPIO tests - if some pins have limitations (e.g. fixed pull-up) we need to skip these pins while testing.
To do that we were adding a dummy pin-map with commented out pins that can't be tested because of the limitations.
This solution is redundant and the proposition is to provide a list of restricted gpio pins if required (by default weak implementation is provided with an empty list).
This mechanism will be backward compatible, so the old method with dummy gpio pinmap will also work. The switch from dummy pin-maps to pinmap_gpio_restricted_pins() will be performed in separate commits/PRs.
2020-02-07 10:45:02 +01:00
54f4777e64
Add STDIO UART as restricted for FPGA testing for all targets
...
Substantiation for this is that the STDIO UART peripheral is used by Mbed, so it should never be tested.
Also solve the potential problem with accidenty skipped peripherals in FPGA testing. Currently, we have a one `pinmap_restricted_peripherals()` function for all interfaces (UART, I2C, SPI, etc.).
The problem can be encountered if different interfaces have the same peripheral ids (e.g. `UART_0` = 0, `SPI_0` = 0). In this case, if `UART_0` is on the restricted list, then SPI tests will be also skipped for `SPI_0`.
The good news is that usually, the peripheral ids are the base addresses of the peripheral's register set, but we can't rely on this. It is also good that `pinmap_restricted_peripherals()` at this moment is only required for STDIO UART (Nuvoton and STM).
To solve this issue we will change name of `pinmap_restricted_peripherals()` to `pinmap_uart_restricted_peripherals()`, make STDIO UART restricted by default for all targets and update FPGA test utilily functions to use `pinmap_uart_restricted_peripherals()` to skip only uart peripherals.
In the future if needed we can consider to add support to restrict peripherals of other interfaces(SPI, I2C, etc).
2020-02-07 10:45:02 +01:00
62cc4ece8d
Merge pull request #12345 from VeijoPesonen/fix_compiler_warnings
...
USBMSD; NFCEEPROM; mbed_compat: Fix compiler warnings
2020-02-03 16:59:35 +00:00
ba5dd4d8c1
Merge pull request #12153 from mprse/spi_fpga_test_extend
...
Hackathon: Increase coverage of the SPI master FPGA test
2020-01-31 15:00:02 +02:00
4278de1f54
HAL: Drops unused variable
2020-01-31 10:19:36 +02:00
d298f963cf
Add mapping between SPI defined behavior and test cases
2020-01-29 08:23:58 +01:00
3dbf780322
Merge pull request #12253 from VeijoPesonen/remove_depr_storage_abstraction
...
storage_abstraction: deprecated since Mbed OS 5.5 and now removed
2020-01-17 14:02:45 +00:00
31988d85fe
Merge pull request #12139 from fkjagodzinski/hal-reset_reason-get_capabilities
...
HAL: Add a get_capabilities() function to ResetReason API
2020-01-16 14:44:31 +00:00
25628eb7b8
storage_abstraction: deprecated API removed before Mbed OS 6
2020-01-14 13:12:45 +02:00
57420fc2f5
HAL: ResetReason: Add the get_capabilities function
...
Add the hal_reset_reason_get_capabilities() to ResetReason HAL API.
Add a default, weak implementation, that every target can override.
2020-01-03 12:11:44 +01:00
a6b0909794
namespace and extern C don't need semicolon
2019-12-26 16:08:22 -06:00
689e0be00c
Extend SPI capabilities
...
Add setting if block transfer allows different sizes of rx/tx buffers.
2019-12-20 12:56:08 +01:00
fe22bc023e
Update HAL CRC API
...
* Change "is supported" check to be a macro, so it can be done at
compile-time.
* Eliminate weird shift on 7-bit CRCs.
* Add support for 32-bit CRCs and reversals to TMPM3HQ.
2019-12-02 14:45:37 +02:00
b2dad08387
Change explicit pinmap to static pinmap
2019-11-28 08:32:12 +01:00
caf438ed9b
get_qspi_pinmap(): Fix invalid condition
2019-11-28 08:32:07 +01:00
6489bb7c99
STM: Add support for internal ADC pins
2019-11-28 08:32:06 +01:00
dac3c218ef
NRF52840_DK: Add explicit pinmap support
2019-11-28 08:32:06 +01:00
097f3b4969
Explicit pinmap: Add support for CAN and QSPI
2019-11-28 08:32:04 +01:00
37714c7894
Add can_init_direct() functions to HAL API
2019-11-28 08:32:03 +01:00
2970e5c699
Add qspi_init_direct() function to HAL API
2019-11-28 08:32:03 +01:00
ba12228556
Explicit pinmap: Fix build failures reported by CI
2019-11-28 08:32:03 +01:00
d75cc97d80
Explicit pinmap - fix style
2019-11-28 08:32:02 +01:00
17c1b9a860
Fix spelling error
2019-11-28 08:32:02 +01:00
9a62195810
Add constexpr utility functions to search for pin mapping
2019-11-28 08:32:01 +01:00
f1367c057c
Add serial_init_direct(), serial_set_flow_control_direct() functions to HAL API
2019-11-28 08:31:59 +01:00
618bd18ef5
Add i2c_init_direct() function to HAL API
2019-11-28 08:31:58 +01:00
60f1cf613e
Add analogout_init_direct() function to HAL API
2019-11-28 08:31:58 +01:00
a67e6f0a90
Add analogin_init_direct() function to HAL API
2019-11-28 08:31:57 +01:00
2ffb0ab65b
Add pwmout_init_direct function to HAL API
2019-11-28 08:31:56 +01:00
582d1b7a37
Add default implementations of xxx_init_direct() functions for explicit pinmap.
2019-11-28 08:31:55 +01:00
fd05ebf96d
Add spi_init_direct() function to HAL API
2019-11-28 08:31:55 +01:00
5aae19792f
Add spi_pinmap_t struct
2019-11-28 08:31:55 +01:00
5f7ecea00b
Revert "MbedCRC and CRC HAL revisions"
2019-11-26 13:45:37 +00:00
1f94428a56
Update HAL CRC API
...
* Change "is supported" check to be a macro, so it can be done at
compile-time.
* Eliminate weird shift on 7-bit CRCs.
* Add support for 32-bit CRCs and reversals to TMPM3HQ.
2019-11-13 14:31:49 +02:00
33e392e9d9
Merge pull request #11682 from mprse/fpga_tests_CI_targets
...
Make FPGA tests to pass on CI targets (SPI, analogIn, PWM)
2019-11-07 11:46:40 +01:00
4b1b4f72af
Add spi_get_capabilities() function to HAL API
...
Add also default weak version of spi_get_capabilities() which provides default/most common SPI parameters.
This function can be replaced if a specific target has different capabilities.
2019-11-06 09:48:25 +01:00
168b51c415
Add storage related files to baseline unittest.
...
* Refactor some headers to use relative path from Mbed OS root.
* Refactor some data types to compile on 64bit machines.
* Refactor some debug traces to use mbed_trace.
2019-11-04 16:12:36 +02:00
eea83007be
Merge pull request #11203 from Tharazi97/Watchdog_lower_limit_timeout_test
...
Add watchdog lower limit timeout test
2019-10-31 14:25:52 +01:00
7a6cf2cb51
Add weak implementations of xxx_free() functions
2019-10-29 14:18:17 +01:00
b8a6792ded
I2C: Add i2c_free() function to HAL
2019-10-29 10:58:39 +01:00
George Psimenos
jeromecoutant
Hugues Kamba
Rajkumar Kanagaraj
Rajkumar Kanagaraj
Martin Kojtal
pea-pod
rogeryou
Kevin Bracey
Antti Kauppila
Jaeden Amero
Roman Okhrimenko
talorion
Charley Chu
Filip Jagodzinski
Przemyslaw Stekiel
Veijo Pesonen
Heath Petersen
Seppo Takalo