The heap size was incorrectly calculated.
This fixes it by subtracting the Stack size, any memory chunks allocated
before the start of the application (for vectors and/or crash report), and
finally the size of the application from the total RAM size.
Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.
To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.
Fixes#10319
For NUCLEO_F401RE, NUCLEO_F411RE, NUCLEO_F303RE, and DISCO_L475VG_IOT01A:
* Ensure the scatter files for the ARM toolchain use 2 region memory model.
The scatter files changes affects the following boards:
* NUCLEO_F401RE, STEVAL_3DP001V1 (stm32f401xe.sct)
* NUCLEO_F411RE, MTS_MDOT_F411RE, MTS_DRAGONFLY_F411RE, MTB_MTS_DRAGONFLY, SAKURAIO_EVB_01 (stm32f411re.sct)
* NUCLEO_F303RE, NUCLEO_F303ZE (stm32f303xe.sct)
* DISCO_L475VG_IOT01A, MTB_STM_L475 (stm32l475xx.sct)
* Remove the TOOLCHAIN_ARM_MICRO directories.
* Remove release_version as not necessary and as the targets can also run
Mbed OS 6.
* Remove uARM support for all FAMILY_STM32 targets.
- By default, Mbed OS build tools use standard C library for all supported toolchains.
It is possible to use smaller C libraries by overriding the "target.default_lib" option
with "small". This option is only currently supported for the GCC_ARM toolchain.
This override config option is now extended in the build tool for ARM toolchain.
- Add configuration option to specify libraries supported for each toolchain per targets.
- Move __aeabi_assert function from rtos to retarget code so it’s available for bare metal.
- Use 2 memory region model for ARM toolchain scatter file for the following targets:
NUCLEO_F207ZG, STM32F411xE, STM32F429xI, NUCLEO_L073RZ, STM32F303xE
- Add a warning message in the build tools to deprecate uARM toolchain.
- NewLib-Nano C library is not supporting floating-point and printf with %hhd,%hhu,%hhX,%lld,%llu,%llX
format specifier so skipping those green tea test cases.
Analogin test fails on D13(PA_5) pin. When logic one (3.3V) is provided on this pin ADC reads 0.86 value. On other pins we got 0.98.
This is caused because this pin is connected to led2.
ARM Compiler 6.13 testing revealed linker errors pointing out
conflicting use of `__user_setup_stackheap` and
`__user_initial_stackheap` in some targets. Remove the unwanted
`__user_initial_stackheap` from the targets - the setup is
centralised in the common platform code.
Looking into this, a number of other issues were highlighted
* Almost all targets had `__initial_sp` hardcoded in assembler,
rather than getting it from the scatter file. This was behind
issue #11313. Fix this generally.
* A few targets' `__initial_sp` values did not match the scatter
file layout, in some cases meaning they were overlapping heap
space. They now all use the area reserved in the scatter file.
If any problems are seen, then there is an error in the
scatter file.
* A number of targets were reserving unneeded space for heap and
stack in their startup assembler, on top of the space reserved in
the scatter file, so wasting a few K. A couple were using that
space for the stack, rather than the space in the scatter file.
To clarify expected behaviour:
* Each scatter file contains empty regions `ARM_LIB_HEAP` and
`ARM_LIB_STACK` to reserve space. `ARM_LIB_STACK` is sized
by the macro `MBED_BOOT_STACK_SIZE`, which is set by the tools.
`ARM_LIB_HEAP` is generally the space left over after static
RAM and stack.
* The address of the end of `ARM_LIB_STACK` is written into the
vector table and on reset the CPU sets MSP to that address.
* The common platform code in Mbed OS provides `__user_setup_stackheap`
for the ARM library. The ARM library calls this during startup, and
it calls `__mbed_user_setup_stackheap`.
* The default weak definition of `__mbed_user_setup_stackheap` does not
modify SP, so we remain on the boot stack, and the heap is set to
the region described by `ARM_LIB_HEAP`. If `ARM_LIB_HEAP` doesn't
exist, then the heap is the space from the end of the used data in
`RW_IRAM1` to the start of `ARM_LIB_STACK`.
* Targets can override `__mbed_user_setup_stackheap` if they want.
Currently only Renesas (ARMv7-A class) devices do.
* If microlib is in use, then it doesn't call `__user_setup_stackheap`.
Instead it just finds and uses `ARM_LIB_STACK` and `ARM_LIB_HEAP`
itself.
Instead of user defined symbols in assembly files or C files,
use linker scripts to add heap and stack - this is inconsistent
with ARM std linker scripts
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files should strictly align to 8-byte boundary
Hugues Kamba
Martin Kojtal
Harrison Mutai
jeromecoutant
Jaeden Amero
MarceloSalazar
Qinghao Shi
Maciej Bocianski
Rajkumar Kanagaraj
Przemyslaw Stekiel
Kevin Bracey
Vincent Veron
Deepika
Cruz Monrreal
Senthil Ramakrishnan
Kari Haapalehto
bcostm