patch search cache param from index configs when index meta could not
get the search cache size key
#issue: #30113
Signed-off-by: xianliang.li <xianliang.li@zilliz.com>
Refine compaction interfaces in datacoord, support compaction result
with more than one segment. Prepare for major compaction.
related: #30633
Signed-off-by: wayblink <anyang.wang@zilliz.com>
1. Increase maxCount of L0 compaction tasks to 30
This could reduce the l0 compaction task number by 30% for
high-frequently-generated-small l0 segments, with the maximum size 64MB
stay not changed. So that l0 segments would accumulate slower and
decrease the mem presure caused by L0 segment for QueryNode
2. Add force Trigger for later manual timely l0 compaction triggers.
See also: #30191, #30556
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
This pr decoups importing segment from flush process by:
1. Exclude the importing segment from the flush policy, this approch
avoids notifying the datanode to flush the importing segment, which may
not exist.
2. When RootCoord call Flush, DataCoord directly set the importing
segment state to `Flushed`.
issue: https://github.com/milvus-io/milvus/issues/30359
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
syncMgr.Block() will lock the segment when executing compaction.
Previous implementation was unable to Unblock thoese segments when
compaction failed. If next compaction of the same segments arrives,
it'll stuck forever and block all later compation tasks.
This PR makes sure compaction executor would Unblock these segments
after a failure compaction.
Apart form that, this PR also refines some logs and clean some codes of
compaction, compactor:
1. Log segment count instead of segmentIDs to avoid logging too many
segments
2. Flush RPC returns L1 segments only, skip L0 and L2
3. CompactionType is checked in `Compaction`, no need to check again
inside compactor
4. Use ligter method to replace `getSegmentMeta`
5. Log information for L0 compaction when encounters an error
See also: #30213
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
See also #30167
After support open telemetry tracing, we want to have traceID as well,
this PR adds util functions to set traceID with span & propagate traceID
between different context.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #25639
/kind improvement
When the number of vector columns increases, the number of rows per
segment will decrease. In order to reduce the impact on vector indexing
performance, it is necessary to increase the segment max limit.
If a collection has multiple vector fields with memory and disk indices
on different vector fields, the size limit after segment compaction is
the minimum of segment.maxSize and segment.diskSegmentMaxSize.
Signed-off-by: xige-16 <xi.ge@zilliz.com>
---------
Signed-off-by: xige-16 <xi.ge@zilliz.com>
After #28873, PartitionID and CollectionID should be filled in
CompactionSegmentBinlog so that DataNode can compose
the correct logPath. However There're some places left forgotten to fill
in the information, causing Datanode downloading `xxx/0/0/xxxx/xxxx`
binlogs during compaction
See also: #30213
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
Resolves#30167
This PR add tracing for all compaction from the task start in datacoord
and execution procedures in datanode.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
This PR discontinuing the subscription to the mq and, instead, employing
the channel checkpoint as the DML and starting position for the import
segments.
issue: https://github.com/milvus-io/milvus/issues/30106
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
See also: #28873
When datanode returns error or go offline during GetCompactionResult
call, the compress binlog logic will panic since it was using a nil
result
This PR move it after the CheckRPCCall error to prevent this case.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
don't store logPath in meta to reduce memory, when service get
segmentinfo, generate logpath from logid.
#28885
Signed-off-by: lixinguo <xinguo.li@zilliz.com>
Co-authored-by: lixinguo <xinguo.li@zilliz.com>
If segment has more than 128 log fils, drop segment will exceed etcd txn
ops limit, which will failed the drop segment request
This PR drop segment meta info with prefix, to avoid drop segment meta
failed
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #27675
For `GetRecoveryInfo` & `GetRecoveryInfoV2`, Level zero segment ids
shall be specified in vchan info so that querycoord could re-fetch
current segment info during watch procedure without having all segment
info
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
THe results don't meet our requirements, and the code hasn't been
maintained for a long time.
See also: #29447
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
support enable/disable mmap for index, the user could alter the index's
mode by `AlterIndex` method
related: https://github.com/milvus-io/milvus/issues/21866
---------
Signed-off-by: yah01 <yah2er0ne@outlook.com>
Signed-off-by: yah01 <yang.cen@zilliz.com>
See also #29327
Change channel checkpoint metrics to unix seconds instead of checkpoint
timestamp lag value
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
This PR:
- Separates compaction scheduler and check results loop So that slow in
check-loop doesn't influence execution.
- Cleans compaction tasks when drop a vchannel so dropped-channel's
compaction tasks won't be checked over and over again.
- Skips meta change when meta's already changed, avoid panic
- Remove not inuse injectDone(bool) parameter
See also: #28628, #28209
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
remove some unnecessary assignments, for the reason that
commonpbutil.NewMsgBase has default value.
Signed-off-by: lixinguo <xinguo.li@zilliz.com>
Co-authored-by: lixinguo <xinguo.li@zilliz.com>
See also #28660
This pr add request timeout config item for etcd kv request timeout
Sync the default timeout value to same value for etcdKV & tikv config
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #28365
Fix bug for parsing error when a string enclosed in single quotes in an
expression contains multiple double quotes.
such as:
```
expr = "tag == '\"blue\"'"
```
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
Compaction plan result contained one segment for one plan. For l0
compaction would write to multiple segments, this PR expand the segments
number in plan results and refactor some names for readibility.
- Name refactory: - CompactionStateResult -> CompactionPlanResult -
CompactionResult -> CompactionSegment
See also: #27606
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
foxspy
cai.zhang
wayblink
XuanYang-cn
yihao.dai
congqixia
xige-16
chyezh
Patrick Weizhi Xu
Bingyi Sun
smellthemoon
yah01
chyezh
wei liu
aoiasd
SimFG
jaime
yah01
Enwei Jiao
PowderLi
MrPresent-Han
Filip Haltmayer
Xiaofan
zhagnlu