issue: #35563
1. Use an internal health checker to monitor the cluster's health state,
storing the latest state on the coordinator node. The CheckHealth
request retrieves the cluster's health from this latest state on the
proxy sides, which enhances cluster stability.
2. Each health check will assess all collections and channels, with
detailed failure messages temporarily saved in the latest state.
3. Use CheckHealth request instead of the heavy GetMetrics request on
the querynode and datanode
Signed-off-by: jaime <yun.zhang@zilliz.com>
issue: #35917
This PR refines the meta-related APIs in datacoord to allow the ctx to
be passed down to the catalog operation interfaces
Signed-off-by: tinswzy <zhenyuan.wei@zilliz.com>
issue: ##36621
- For simple types in a struct, add "string" to the JSON tag for
automatic string conversion during JSON encoding.
- For complex types in a struct, replace "int64" with "string."
Signed-off-by: jaime <yun.zhang@zilliz.com>
issue: #36858
- Start channel manager on datacoord, but with empty assign policy in
streaming service.
- Make collection at dropping state can be recovered by flusher to make
sure that
milvus consume the dropCollection message.
- Add backoff for flusher lifetime.
- remove the proxy watcher from timetick at rootcoord in streaming
service.
Also see the better fixup: #37176
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #36621
1. Add API to access task runtime metrics, including:
- build index task
- compaction task
- import task
- balance (including load/release of segments/channels and some leader
tasks on querycoord)
- sync task
2. Add a debug model to the webpage by using debug=true or debug=false
in the URL query parameters to enable or disable debug mode.
Signed-off-by: jaime <yun.zhang@zilliz.com>
issue: #34553
when rootcoord trigger graceful stop progress, it will block until all
rpc finished. for create collection request, rootcoord need to block
until datacoord finish to watch all channels, but datacoord need to call
`rootcoord.Alloc` during watch channel, and rootcoord doesn't respond to
new request anymore. which cause create collection stucks, and graceful
stop progress stucks.
This PR remove the func call `rootcoord.Alloc` to solve the logic dead
lock during graceful stop progress.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Directly add import segments from the meta, eliminating the dependency
on the segment manager.
issue: https://github.com/milvus-io/milvus/issues/34648
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #33744
This PR includes the following changes:
1. Added a new task type to the task scheduler in datacoord: stats task,
which sorts segments by primary key.
2. Implemented segment sorting in indexnode.
3. Added a new field `FieldStatsLog` to SegmentInfo to store token index
information.
---------
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
Related to #28861
Move session manager, worker manager to session package. Also renaming
each manager to corresponding node name(datanode, indexnode).
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Related to #28861
Move allocator interface and implementation into separate package. Also
update some unittest logic.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: # #34545
Print warn log instead of check health fail if orphan channel cp meta is
found in health check request.
Signed-off-by: jaime <yun.zhang@zilliz.com>
1. Fill log ID of stats log from import
2. Add a check to validate the log ID before writing to meta
issue: https://github.com/milvus-io/milvus/issues/33476
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
See also #33062
This PR:
- Add `lock.RWMutex` & `lock.Mutex` alias to switch implementation based
on build flags
- When build flags has `test` in it, use `go-deadlock` to detect
possible deadlocks
- Replace all `sync.RWMutex` & `sync.Mutex` in datacoord pkg
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Tidy the following test codes
- Remove channel in newTestServer
- Remove newTestServerWithMeta
- Remove newTestServer2
- Remove testDataCoordBase
- Use the same func for handleTTmsg and handleRPCTTmsg
See also: #31620
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
See also #32066
This PR make coordinator register successful and let
`ProcessActiveStandBy` run async. And roles may receive stop signal and
notify servers.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
"-1" as `InvalidPartitionID` previously used as All partition place
holder in delete cases. It's confusing and hard to maintain when a const
var has more than one meaning.
This PR add `AllPartitionsID` to replace these usages in delete
scenarios.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
This PR includes the following adjustments:
1. To prevent channelCP update task backlog, only one task with the same
vchannel is retained in the updater. Additionally, the lastUpdateTime is
refreshed after the flowgraph submits the update task, rather than in
the callBack function.
2. Batch updates of multiple vchannel checkpoints are performed in the
UpdateChannelCheckpoint RPC (default batch size is 128). Additionally,
the lock for channelCPs in DataCoord meta has been switched from key
lock to global lock.
3. The concurrency of UpdateChannelCheckpoint RPCs in the datanode has
been reduced from 1000 to 10.
issue: https://github.com/milvus-io/milvus/issues/30004
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Co-authored-by: jaime <yun.zhang@zilliz.com>
Co-authored-by: congqixia <congqi.xia@zilliz.com>
This PR introduces novel managerial roles for importv2:
1. ImportMeta: To manage all the import tasks;
2. ImportScheduler: To process tasks and modify their states;
3. ImportChecker: To ascertain the completion of all tasks and instigate
relevant operations.
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
This pr decoups importing segment from flush process by:
1. Exclude the importing segment from the flush policy, this approch
avoids notifying the datanode to flush the importing segment, which may
not exist.
2. When RootCoord call Flush, DataCoord directly set the importing
segment state to `Flushed`.
issue: https://github.com/milvus-io/milvus/issues/30359
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
This PR discontinuing the subscription to the mq and, instead, employing
the channel checkpoint as the DML and starting position for the import
segments.
issue: https://github.com/milvus-io/milvus/issues/30106
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
don't store logPath in meta to reduce memory, when service get
segmentinfo, generate logpath from logid.
#28885
Signed-off-by: lixinguo <xinguo.li@zilliz.com>
Co-authored-by: lixinguo <xinguo.li@zilliz.com>
See also #27675
For `GetRecoveryInfo` & `GetRecoveryInfoV2`, Level zero segment ids
shall be specified in vchan info so that querycoord could re-fetch
current segment info during watch procedure without having all segment
info
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
jaime
cai.zhang
yihao.dai
tinswzy
Zhen Ye
wei liu
XuanYang-cn
congqixia
wayblink
smellthemoon
zhenshan.cao
SimFG
yiwangdr
Bingyi Sun
aoiasd