website/content/zh/docs/concepts/services-networking/ingress.md

---
title: Ingress
content_template: templates/concept
weight: 40
---
<!--
---
reviewers:
- bprashanth
title: Ingress
content_template: templates/concept
weight: 40
---
-->

{{% capture overview %}}
{{< feature-state for_k8s_version="v1.1" state="beta" >}}
{{< glossary_definition term_id="ingress" length="all" >}}
{{% /capture %}}

{{% capture body %}}

<!--
## Terminology
-->
## 专用术语

<!-- 
For clarity, this guide defines the following terms:
-->
为了表达更加清晰，本指南定义了以下术语：

<!-- 
* Node: A worker machine in Kubernetes, part of a cluster.
* Cluster: A set of Nodes that run containerized applications managed by Kubernetes. For this example, and in most common Kubernetes deployments, nodes in the cluster are not part of the public internet.
* Edge router: A router that enforces the firewall policy for your cluster. This could be a gateway managed by a cloud provider or a physical piece of hardware.
* Cluster network: A set of links, logical or physical, that facilitate communication within a cluster according to the Kubernetes [networking model](/docs/concepts/cluster-administration/networking/).
* Service: A Kubernetes {{< glossary_tooltip term_id="service" >}} that identifies a set of Pods using {{< glossary_tooltip text="label" term_id="label" >}} selectors. Unless mentioned otherwise, Services are assumed to have virtual IPs only routable within the cluster network.
 -->
* 节点（Node）: Kubernetes 集群中其中一台工作机器，是集群的一部分。
* 集群（Cluster）: 一组运行程序（这些程序是容器化的，被 Kubernetes 管理的）的节点。 在此示例中，和在大多数常见的Kubernetes部署方案，集群中的节点都不会是公共网络。
* 边缘路由器（Edge router）: 在集群中强制性执行防火墙策略的路由器（router）。可以是由云提供商管理的网关，也可以是物理硬件。
* 集群网络（Cluster network）: 一组逻辑或物理的链接，根据 Kubernetes [网络模型](/docs/concepts/cluster-administration/networking/) 在集群内实现通信。
* 服务（Service）：Kubernetes {{< glossary_tooltip term_id="service" >}} 使用 {{< glossary_tooltip text="标签" term_id="label" >}} 选择器（selectors）标识的一组 Pod。除非另有说明，否则假定服务只具有在集群网络中可路由的虚拟 IP。

<!--
## What is Ingress?
-->
## Ingress 是什么？

<!--
[Ingress](/docs/reference/generated/kubernetes-api/{{< param "version" >}}/#ingress-v1beta1-networking-k8s-io) exposes HTTP and HTTPS routes from outside the cluster to
{{< link text="services" url="/docs/concepts/services-networking/service/" >}} within the cluster.
Traffic routing is controlled by rules defined on the Ingress resource.
-->

[Ingress](/docs/reference/generated/kubernetes-api/{{< param "version" >}}/#ingress-v1beta1-networking-k8s-io) 公开了从集群外部到集群内 {{< link text="services" url="/docs/concepts/services-networking/service/" >}} 的 HTTP 和 HTTPS 路由。
流量路由由 Ingress 资源上定义的规则控制。

```none
    internet
        |
   [ Ingress ]
   --|-----|--
   [ Services ]
```

<!-- 
An Ingress may be configured to give Services externally-reachable URLs, load balance traffic, terminate SSL / TLS, and offer name based virtual hosting. An [Ingress controller](/docs/concepts/services-networking/ingress-controllers) is responsible for fulfilling the Ingress, usually with a load balancer, though it may also configure your edge router or additional frontends to help handle the traffic.
-->
可以将 Ingress 配置为提供服务外部可访问的 URL、负载均衡流量、终止 SSL / TLS，以及提供基于名称的虚拟主机。[Ingress 控制器](/docs/concepts/services-networking/ingress-controllers) 通常负责通过负载均衡器来实现 Ingress，尽管它也可以配置边缘路由器或其他前端来帮助处理流量。

<!-- 
An Ingress does not expose arbitrary ports or protocols. Exposing services other than HTTP and HTTPS to the internet typically
uses a service of type [Service.Type=NodePort](/docs/concepts/services-networking/service/#nodeport) or
[Service.Type=LoadBalancer](/docs/concepts/services-networking/service/#loadbalancer).
-->
Ingress 不会公开任意端口或协议。
将 HTTP 和 HTTPS 以外的服务公开到 Internet 时，通常使用 [Service.Type=NodePort](/docs/concepts/services-networking/service/#nodeport) 或者 [Service.Type=LoadBalancer](/docs/concepts/services-networking/service/#loadbalancer) 类型的服务。

<!--
## Prerequisites
-->
## 环境准备

<!-- 
You must have an [ingress controller](/docs/concepts/services-networking/ingress-controllers) to satisfy an Ingress. Only creating an Ingress resource has no effect.
-->
您必须具有 [ingress 控制器](/docs/concepts/services-networking/ingress-controllers) 才能满足 Ingress 的要求。仅创建 Ingress 资源无效。

<!-- 
You may need to deploy an Ingress controller such as [ingress-nginx](https://kubernetes.github.io/ingress-nginx/deploy/). You can choose from a number of
[Ingress controllers](/docs/concepts/services-networking/ingress-controllers).
-->
您可能需要部署 Ingress 控制器，例如 [ingress-nginx](https://kubernetes.github.io/ingress-nginx/deploy/)。您可以从许多[Ingress 控制器](/docs/concepts/services-networking/ingress-controllers) 中进行选择。

<!-- 
Ideally, all Ingress controllers should fit the reference specification. In reality, the various Ingress
controllers operate slightly differently.
 -->
理想情况下，所有 Ingress 控制器都应符合参考规范。但实际上，不同的 Ingress 控制器操作略有不同。

<!--
Make sure you review your Ingress controller's documentation to understand the caveats of choosing it.
-->
{{< note >}}
确保您查看了 Ingress 控制器的文档，以了解选择它的注意事项。
{{< /note >}}

<!--
## The Ingress Resource
-->
## Ingress 资源

<!-- 
A minimal Ingress resource example:
-->
一个最小的 Ingress 资源示例：

```yaml
apiVersion: networking.k8s.io/v1beta1
kind: Ingress
metadata:
  name: test-ingress
  annotations:
    nginx.ingress.kubernetes.io/rewrite-target: /
spec:
  rules:
  - http:
      paths:
      - path: /testpath
        pathType: Prefix
        backend:
          serviceName: test
          servicePort: 80
```

<!-- 
As with all other Kubernetes resources, an Ingress needs `apiVersion`, `kind`, and `metadata` fields.
The name of an Ingress object must be a valid
[DNS subdomain name](/docs/concepts/overview/working-with-objects/names#dns-subdomain-names).
For general information about working with config files, see [deploying applications](/docs/tasks/run-application/run-stateless-application-deployment/), [configuring containers](/docs/tasks/configure-pod-container/configure-pod-configmap/), [managing resources](/docs/concepts/cluster-administration/manage-deployment/).
 Ingress frequently uses annotations to configure some options depending on the Ingress controller, an example of which
 is the [rewrite-target annotation](https://github.com/kubernetes/ingress-nginx/blob/master/docs/examples/rewrite/README.md).
Different [Ingress controller](/docs/concepts/services-networking/ingress-controllers) support different annotations. Review the documentation for
 your choice of Ingress controller to learn which annotations are supported.
-->
 与所有其他 Kubernetes 资源一样，Ingress 需要使用 `apiVersion`、`kind` 和 `metadata` 字段。
 Ingress 对象的命名必须是合法的 [DNS 子域名名称](/docs/concepts/overview/working-with-objects/names#dns-subdomain-names)。
 有关使用配置文件的一般信息，请参见[部署应用](/docs/tasks/run-application/run-stateless-application-deployment/)、 [配置容器](/docs/tasks/configure-pod-container/configure-pod-configmap/)、[管理资源](/docs/concepts/cluster-administration/manage-deployment/)。
 Ingress 经常使用注解（annotations）来配置一些选项，具体取决于 Ingress 控制器，例如 [rewrite-target annotation](https://github.com/kubernetes/ingress-nginx/blob/master/docs/examples/rewrite/README.md)。
 不同的 [Ingress 控制器](/docs/concepts/services-networking/ingress-controllers) 支持不同的注解（annotations）。查看文档以供您选择 Ingress 控制器，以了解支持哪些注解（annotations）。

<!-- 
The Ingress [spec](https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status)
has all the information needed to configure a load balancer or proxy server. Most importantly, it
contains a list of rules matched against all incoming requests. Ingress resource only supports rules
for directing HTTP traffic.
-->
Ingress [规范](https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status) 具有配置负载均衡器或者代理服务器所需的所有信息。最重要的是，它包含与所有传入请求匹配的规则列表。Ingress 资源仅支持用于定向 HTTP 流量的规则。

<!-- 
### Ingress rules
-->
### Ingress 规则

<!--
Each HTTP rule contains the following information:
-->
每个 HTTP 规则都包含以下信息：

<!-- 
* An optional host. In this example, no host is specified, so the rule applies to all inbound
  HTTP traffic through the IP address specified. If a host is provided (for example,
  foo.bar.com), the rules apply to that host.
* A list of paths (for example, `/testpath`), each of which has an associated backend defined with a `serviceName`
  and `servicePort`. Both the host and path must match the content of an incoming request before the
  load balancer directs traffic to the referenced Service.
* A backend is a combination of Service and port names as described in the
  [Service doc](/docs/concepts/services-networking/service/). HTTP (and HTTPS) requests to the
  Ingress that matches the host and path of the rule are sent to the listed backend.
-->
* 可选主机。在此示例中，未指定主机，因此该规则适用于通过指定 IP 地址的所有入站 HTTP 通信。如果提供了主机（例如 foo.bar.com），则规则适用于该主机。
* 路径列表（例如，`/testpath`）,每个路径都有一个由 `serviceName` 和 `servicePort` 定义的关联后端。在负载均衡器将流量定向到引用的服务之前，主机和路径都必须匹配传入请求的内容。
* 后端是 [Service 文档](/docs/concepts/services-networking/service/)中所述的服务和端口名称的组合。与规则的主机和路径匹配的对 Ingress 的 HTTP（和 HTTPS ）请求将发送到列出的后端。

<!-- 
A default backend is often configured in an Ingress controller to service any requests that do not
match a path in the spec. 
-->
通常在 Ingress 控制器中配置默认后端，以服务任何不符合规范中路径的请求。

<!-- 
### Default Backend
-->
### 默认后端

<!-- 
An Ingress with no rules sends all traffic to a single default backend. The default
backend is typically a configuration option of the [Ingress controller](/docs/concepts/services-networking/ingress-controllers) and is not specified in your Ingress resources.
-->
没有规则的 Ingress 将所有流量发送到单个默认后端。默认后端通常是 [Ingress 控制器](/docs/concepts/services-networking/ingress-controllers)的配置选项，并且未在 Ingress 资源中指定。

<!--
If none of the hosts or paths match the HTTP request in the Ingress objects, the traffic is
routed to your default backend.
-->
如果没有主机或路径与 Ingress 对象中的 HTTP 请求匹配，则流量将路由到您的默认后端。

<!-- 
### Path Types
 -->
### 路径类型

<!-- 
Each path in an Ingress has a corresponding path type. There are three supported
path types:
 -->
Ingress 中的每个路径都有对应的路径类型。支持三种类型：

<!-- 
* _`ImplementationSpecific`_ (default): With this path type, matching is up to
  the IngressClass. Implementations can treat this as a separate `pathType` or
  treat it identically to `Prefix` or `Exact` path types.

* _`Exact`_: Matches the URL path exactly and with case sensitivity.

* _`Prefix`_: Matches based on a URL path prefix split by `/`. Matching is case
  sensitive and done on a path element by element basis. A path element refers
  to the list of labels in the path split by the `/` separator. A request is a
  match for path _p_ if every _p_ is an element-wise prefix of _p_ of the
  request path.
    If the last element of the path is a substring of the
    last element in request path, it is not a match (for example:
    `/foo/bar` matches`/foo/bar/baz`, but does not match `/foo/barbaz`).
 -->
* _`ImplementationSpecific`_ （默认）：对于这种类型，匹配取决于 IngressClass. 具体实现可以将其作为单独的 `pathType` 处理或者与 `Prefix` 或 `Exact` 类型作相同处理。

* _`Exact`_：精确匹配 URL 路径且对大小写敏感。

* _`Prefix`_：基于以 `/` 分割的 URL 路径前缀匹配。匹配对大小写敏感，并且对路径中的元素逐个完成。路径元素指的是由 `/` 分隔符分割的路径中的标签列表。如果每个 _p_ 都是请求路径 _p_ 的元素前缀，则请求与路径 _p_ 匹配。
    {{< note >}}
    如果路径的最后一个元素是请求路径中最后一个元素的子字符串，则不会匹配（例如：`/foo/bar` 匹配 `/foo/bar/baz`, 但不匹配 `/foo/barbaz`）。
    {{< /note >}}

<!-- 
#### Multiple Matches
In some cases, multiple paths within an Ingress will match a request. In those
cases precedence will be given first to the longest matching path. If two paths
are still equally matched, precedence will be given to paths with an exact path
type over prefix path type.
 -->
#### 多重匹配

在某些情况下，Ingress 中的多条路径会匹配同一个请求。这种情况下最长的匹配路径优先。如果仍然有两条同等的匹配路径，则精确路径类型优先于前缀路径类型。

<!-- 
## Ingress Class
 -->
## Ingress 类

<!-- 
Ingresses can be implemented by different controllers, often with different
configuration. Each Ingress should specify a class, a reference to an
IngressClass resource that contains additional configuration including the name
of the controller that should implement the class.
 -->
Ingress 可以由不同的控制器实现，通常使用不同的配置。每个 Ingress 应当指定一个类，一个对 IngressClass 资源的引用，该资源包含额外的配置，其中包括应当实现该类的控制器名称。

```yaml
apiVersion: networking.k8s.io/v1beta1
kind: IngressClass
metadata:
  name: external-lb
spec:
  controller: example.com/ingress-controller
  parameters:
    apiGroup: k8s.example.com/v1alpha
    kind: IngressParameters
    name: external-lb
```

<!-- 
IngressClass resources contain an optional parameters field. This can be used to
reference additional configuration for this class.
 -->
IngressClass 资源包含一个可选的参数字段。可用于引用该类的额外配置。

<!-- 
### Deprecated Annotation
 -->
### 废弃的注解

<!-- 
Before the IngressClass resource and `ingressClassName` field were added in
Kubernetes 1.18, Ingress classes were specified with a
`kubernetes.io/ingress.class` annotation on the Ingress. This annotation was
never formally defined, but was widely supported by Ingress controllers.
 -->
在 IngressClass 资源和 `ingressClassName` 字段被引入 Kubernetes 1.18 之前，Ingress 类是通过 Ingress 中的一个 
`kubernetes.io/ingress.class` 注解来指定的。这个注解从未被正式定义过，但是得到了 Ingress 控制器的广泛支持。

<!-- 
The newer `ingressClassName` field on Ingresses is a replacement for that
annotation, but is not a direct equivalent. While the annotation was generally
used to reference the name of the Ingress controller that should implement the
Ingress, the field is a reference to an IngressClass resource that contains
additional Ingress configuration, including the name of the Ingress controller.
 -->
Ingress 中新的 `ingressClassName` 字段是该注解的替代品，但并非完全等价。该注解通常用于引用实现该 Ingress 的控制器的名称，
而这个新的字段则是对一个包含额外 Ingress 配置的 IngressClass 资源的引用，包括 Ingress 控制器的名称。

<!-- 
### Default Ingress Class
 -->
### 默认 Ingress 类

<!-- 
You can mark a particular IngressClass as default for your cluster. Setting the
`ingressclass.kubernetes.io/is-default-class` annotation to `true` on an
IngressClass resource will ensure that new Ingresses without an
`ingressClassName` field specified will be assigned this default IngressClass.
 -->
您可以将一个特定的 IngressClass 标记为集群默认项。将一个 IngressClass 资源的 `ingressclass.kubernetes.io/is-default-class` 注解设置为 `true` 将确保新的未指定 `ingressClassName` 字段的 Ingress 能够分配为这个默认的 IngressClass.

<!-- 
If you have more than one IngressClass marked as the default for your cluster,
the admission controller prevents creating new Ingress objects that don't have
an `ingressClassName` specified. You can resolve this by ensuring that at most 1
IngressClasess are marked as default in your cluster.
 -->
{{< caution >}}
如果集群中有多个 IngressClass 被标记为默认，准入控制器将阻止创建新的未指定 `ingressClassName` 字段的 Ingress 对象。
解决这个问题只需确保集群中最多只能有一个 IngressClass 被标记为默认。
{{< /caution >}}

<!--
## Types of Ingress
-->
## Ingress 类型

<!-- 
### Single Service Ingress
-->
### 单服务 Ingress

<!-- 
There are existing Kubernetes concepts that allow you to expose a single Service
(see [alternatives](#alternatives)). You can also do this with an Ingress by specifying a
*default backend* with no rules.
-->
现有的 Kubernetes 概念允许您暴露单个 Service (查看[替代方案](#alternatives))，您也可以通过指定无规则的 *默认后端* 来对 Ingress 进行此操作。

{{< codenew file="service/networking/ingress.yaml" >}}

<!-- 
If you create it using `kubectl apply -f` you should be able to view the state
of the Ingress you just added:
-->
如果使用 `kubectl apply -f` 创建它，则应该能够查看刚刚添加的 Ingress 的状态：

```shell
kubectl get ingress test-ingress
```

```
NAME           HOSTS     ADDRESS           PORTS     AGE
test-ingress   *         203.0.113.123     80        59s
```

<!-- 
Where `203.0.113.123` is the IP allocated by the Ingress controller to satisfy
this Ingress.
-->
其中 `203.0.113.123` 是由 Ingress 控制器分配以满足该 Ingress 的 IP。

<!--
Ingress controllers and load balancers may take a minute or two to allocate an IP address.
Until that time, you often see the address listed as `<pending>`.
-->
{{< note >}}
入口控制器和负载平衡器可能需要一两分钟才能分配IP地址。 在此之前，您通常会看到地址字段的值被设定为 `<pending>`。
{{< /note >}}

<!--
### Simple fanout
-->
### 简单分列

<!--
A fanout configuration routes traffic from a single IP address to more than one Service,
based on the HTTP URI being requested. An Ingress allows you to keep the number of load balancers
down to a minimum. For example, a setup like:
-->
一个分列配置根据请求的 HTTP URI 将流量从单个 IP 地址路由到多个服务。
Ingress 允许您将负载均衡器的数量降至最低。例如，这样的设置：

```none
foo.bar.com -> 178.91.123.132 -> / foo    service1:4200
                                 / bar    service2:8080
```

<!--
would require an Ingress such as:
-->
将需要一个 Ingress，例如：

```yaml
apiVersion: networking.k8s.io/v1beta1
kind: Ingress
metadata:
  name: simple-fanout-example
  annotations:
    nginx.ingress.kubernetes.io/rewrite-target: /
spec:
  rules:
  - host: foo.bar.com
    http:
      paths:
      - path: /foo
        backend:
          serviceName: service1
          servicePort: 4200
      - path: /bar
        backend:
          serviceName: service2
          servicePort: 8080
```

<!--
When you create the Ingress with `kubectl apply -f`:
-->
当您使用 `kubectl apply -f` 创建 Ingress 时：

```shell
kubectl describe ingress simple-fanout-example
```

```
Name:             simple-fanout-example
Namespace:        default
Address:          178.91.123.132
Default backend:  default-http-backend:80 (10.8.2.3:8080)
Rules:
  Host         Path  Backends
  ----         ----  --------
  foo.bar.com
               /foo   service1:4200 (10.8.0.90:4200)
               /bar   service2:8080 (10.8.0.91:8080)
Annotations:
  nginx.ingress.kubernetes.io/rewrite-target:  /
Events:
  Type     Reason  Age                From                     Message
  ----     ------  ----               ----                     -------
  Normal   ADD     22s                loadbalancer-controller  default/test
```

<!--
The Ingress controller provisions an implementation-specific load balancer
that satisfies the Ingress, as long as the Services (`service1`, `service2`) exist.
When it has done so, you can see the address of the load balancer at the
Address field.
-->

Ingress 控制器将提供实现特定的负载均衡器来满足 Ingress，只要 Service (`service1`，`service2`) 存在。
当它这样做了，您会在地址栏看到负载均衡器的地址。

<!--
Depending on the [Ingress controller](/docs/concepts/services-networking/ingress-controllers)
you are using, you may need to create a default-http-backend
[Service](/docs/concepts/services-networking/service/).
-->
{{< note >}}
根据您使用的 [Ingress 控制器](/docs/concepts/services-networking/ingress-controllers)，您可能需要创建默认 HTTP 后端 [Service](/docs/concepts/services-networking/service/)。
{{< /note >}}


<!--
### Name based virtual hosting
-->
### 基于名称的虚拟托管

<!--
Name-based virtual hosts support routing HTTP traffic to multiple host names at the same IP address.
-->
基于名称的虚拟主机支持将 HTTP 流量路由到同一 IP 地址上的多个主机名。

```none
foo.bar.com --|                 |-> foo.bar.com service1:80
              | 178.91.123.132  |
bar.foo.com --|                 |-> bar.foo.com service2:80
```


<!--
The following Ingress tells the backing load balancer to route requests based on
the [Host header](https://tools.ietf.org/html/rfc7230#section-5.4).
-->
以下 Ingress 让后台负载均衡器基于[主机 header](https://tools.ietf.org/html/rfc7230#section-5.4) 路由请求。

```yaml
apiVersion: networking.k8s.io/v1beta1
kind: Ingress
metadata:
  name: name-virtual-host-ingress
spec:
  rules:
  - host: foo.bar.com
    http:
      paths:
      - backend:
          serviceName: service1
          servicePort: 80
  - host: bar.foo.com
    http:
      paths:
      - backend:
          serviceName: service2
          servicePort: 80
```

<!-- 
If you create an Ingress resource without any hosts defined in the rules, then any
web traffic to the IP address of your Ingress controller can be matched without a name based
virtual host being required.
-->
如果您创建的 Ingress 资源没有规则中定义的任何主机，则可以匹配到您 Ingress 控制器 IP 地址的任何网络流量，而无需基于名称的虚拟主机。

<!-- 
For example, the following Ingress resource will route traffic
requested for `first.bar.com` to `service1`, `second.foo.com` to `service2`, and any traffic
to the IP address without a hostname defined in request (that is, without a request header being
presented) to `service3`.
-->
例如，以下 Ingress 资源会将 `first.bar.com` 请求的流量路由到 `service1`，将 `second.foo.com` 请求的流量路由到 `service2`，而没有在请求中定义主机名的 IP 地址的流量路由（即，不提供请求标头）到 `service3`。

```yaml
apiVersion: networking.k8s.io/v1beta1
kind: Ingress
metadata:
  name: name-virtual-host-ingress
spec:
  rules:
  - host: first.bar.com
    http:
      paths:
      - backend:
          serviceName: service1
          servicePort: 80
  - host: second.foo.com
    http:
      paths:
      - backend:
          serviceName: service2
          servicePort: 80
  - http:
      paths:
      - backend:
          serviceName: service3
          servicePort: 80
```

<!--
### TLS
-->
### TLS


<!--
You can secure an Ingress by specifying a {{< glossary_tooltip term_id="secret" >}}
that contains a TLS private key and certificate. Currently the Ingress only
supports a single TLS port, 443, and assumes TLS termination. If the TLS
configuration section in an Ingress specifies different hosts, they are
multiplexed on the same port according to the hostname specified through the
SNI TLS extension (provided the Ingress controller supports SNI). The TLS secret
must contain keys named `tls.crt` and `tls.key` that contain the certificate
and private key to use for TLS. For example:
-->

您可以通过指定包含 TLS 私钥和证书的 secret {{< glossary_tooltip term_id="secret" >}} 来加密 Ingress。
目前，Ingress 只支持单个 TLS 端口 443，并假定 TLS 终止。

如果 Ingress 中的 TLS 配置部分指定了不同的主机，那么它们将根据通过 SNI TLS 扩展指定的主机名（如果 Ingress 控制器支持 SNI）在同一端口上进行复用。
TLS Secret 必须包含名为 `tls.crt` 和 `tls.key` 的密钥，这些密钥包含用于 TLS 的证书和私钥，例如：

```yaml
apiVersion: v1
kind: Secret
metadata:
  name: testsecret-tls
  namespace: default
data:
  tls.crt: base64 encoded cert
  tls.key: base64 encoded key
type: kubernetes.io/tls
```

<!--
Referencing this secret in an Ingress tells the Ingress controller to
secure the channel from the client to the load balancer using TLS. You need to make
sure the TLS secret you created came from a certificate that contains a Common
Name (CN), also known as a Fully Qualified Domain Name (FQDN) for `sslexample.foo.com`.
-->
在 Ingress 中引用此 Secret 将会告诉 Ingress 控制器使用 TLS 加密从客户端到负载均衡器的通道。您需要确保创建的 TLS secret 来自包含 `sslexample.foo.com` 的公用名称（CN）的证书，也被称为全限定域名（FQDN）。

```yaml
apiVersion: networking.k8s.io/v1beta1
kind: Ingress
metadata:
  name: tls-example-ingress
spec:
  tls:
  - hosts:
    - sslexample.foo.com
    secretName: testsecret-tls
  rules:
    - host: sslexample.foo.com
      http:
        paths:
        - path: /
          backend:
            serviceName: service1
            servicePort: 80
```

<!-- 
There is a gap between TLS features supported by various Ingress
controllers. Please refer to documentation on
[nginx](https://kubernetes.github.io/ingress-nginx/user-guide/tls/),
[GCE](https://git.k8s.io/ingress-gce/README.md#frontend-https), or any other
platform specific Ingress controller to understand how TLS works in your environment.
-->
{{< note >}}
各种 Ingress 控制器所支持的 TLS 功能之间存在差异。请参阅有关文件
[nginx](https://kubernetes.github.io/ingress-nginx/user-guide/tls/)、
[GCE](https://git.k8s.io/ingress-gce/README.md#frontend-https) 或者任何其他平台特定的 Ingress 控制器，以了解 TLS 如何在您的环境中工作。
{{< /note >}}

<!--
### Loadbalancing
-->
### 负载均衡

<!-- 
An Ingress controller is bootstrapped with some load balancing policy settings
that it applies to all Ingress, such as the load balancing algorithm, backend
weight scheme, and others. More advanced load balancing concepts
(e.g. persistent sessions, dynamic weights) are not yet exposed through the
Ingress. You can instead get these features through the load balancer used for
a Service.
-->

Ingress 控制器使用一些适用于所有 Ingress 的负载均衡策略设置进行自举，例如负载均衡算法、后端权重方案和其他等。更高级的负载均衡概念（例如，持久会话、动态权重）尚未通过 Ingress 公开。您可以通过用于服务的负载均衡器来获取这些功能。

<!--
It's also worth noting that even though health checks are not exposed directly
through the Ingress, there exist parallel concepts in Kubernetes such as
[readiness probes](/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/)
that allow you to achieve the same end result. Please review the controller
specific documentation to see how they handle health checks (
[nginx](https://git.k8s.io/ingress-nginx/README.md),
[GCE](https://git.k8s.io/ingress-gce/README.md#health-checks)).
-->
值得注意的是，即使健康检查不是通过 Ingress 直接暴露的，但是在 Kubernetes 中存在并行概念，比如 [就绪检查](/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/)，它允许您实现相同的最终结果。
请检查控制器特殊说明文档，以了解他们是怎样处理健康检查的 (
[nginx](https://git.k8s.io/ingress-nginx/README.md)，
[GCE](https://git.k8s.io/ingress-gce/README.md#health-checks))。


<!--
## Updating an Ingress
-->
## 更新 Ingress

<!--
To update an existing Ingress to add a new Host, you can update it by editing the resource:
-->
要更新现有的 Ingress 以添加新的 Host，可以通过编辑资源来对其进行更新：

```shell
kubectl describe ingress test
```

```
Name:             test
Namespace:        default
Address:          178.91.123.132
Default backend:  default-http-backend:80 (10.8.2.3:8080)
Rules:
  Host         Path  Backends
  ----         ----  --------
  foo.bar.com
               /foo   service1:80 (10.8.0.90:80)
Annotations:
  nginx.ingress.kubernetes.io/rewrite-target:  /
Events:
  Type     Reason  Age                From                     Message
  ----     ------  ----               ----                     -------
  Normal   ADD     35s                loadbalancer-controller  default/test
```

```shell
kubectl edit ingress test
```

<!--
This pops up an editor with the existing configuration in YAML format.
Modify it to include the new Host:
-->

这将弹出具有 YAML 格式的现有配置的编辑器。
修改它来增加新的主机：

```yaml
spec:
  rules:
  - host: foo.bar.com
    http:
      paths:
      - backend:
          serviceName: service1
          servicePort: 80
        path: /foo
  - host: bar.baz.com
    http:
      paths:
      - backend:
          serviceName: service2
          servicePort: 80
        path: /foo
..
```

<!--
After you save your changes, kubectl updates the resource in the API server, which tells the
Ingress controller to reconfigure the load balancer.
-->
保存更改后，kubectl 将更新 API 服务器中的资源，该资源将告诉 Ingress 控制器重新配置负载均衡器。

<!--
Verify this:
-->
验证：

```shell
kubectl describe ingress test
```

```
Name:             test
Namespace:        default
Address:          178.91.123.132
Default backend:  default-http-backend:80 (10.8.2.3:8080)
Rules:
  Host         Path  Backends
  ----         ----  --------
  foo.bar.com
               /foo   service1:80 (10.8.0.90:80)
  bar.baz.com
               /foo   service2:80 (10.8.0.91:80)
Annotations:
  nginx.ingress.kubernetes.io/rewrite-target:  /
Events:
  Type     Reason  Age                From                     Message
  ----     ------  ----               ----                     -------
  Normal   ADD     45s                loadbalancer-controller  default/test
```


<!--
You can achieve the same outcome by invoking `kubectl replace -f` on a modified Ingress YAML file.
-->
您可以通过 `kubectl replace -f` 命令调用修改后的 Ingress yaml 文件来获得同样的结果。

<!--
## Failing across availability zones
-->
## 跨可用区失败

<!--
Techniques for spreading traffic across failure domains differs between cloud providers.
Please check the documentation of the relevant [Ingress controller](/docs/concepts/services-networking/ingress-controllers) for details. You can also refer to the [federation documentation](https://github.com/kubernetes-sigs/federation-v2)
for details on deploying Ingress in a federated cluster.
-->

用于跨故障域传播流量的技术在云提供商之间是不同的。详情请查阅相关 Ingress 控制器的文档。
请查看相关[ Ingress 控制器](/docs/concepts/services-networking/ingress-controllers) 的文档以了解详细信息。
您还可以参考[联邦文档](https://github.com/kubernetes-sigs/federation-v2)，以获取有关在联合集群中部署 Ingress 的详细信息。


<!--
## Future Work
-->
## 未来工作

<!--
Track [SIG Network](https://github.com/kubernetes/community/tree/master/sig-network)
for more details on the evolution of Ingress and related resources. You may also track the
[Ingress repository](https://github.com/kubernetes/ingress/tree/master) for more details on the
evolution of various Ingress controllers.
-->
跟踪 [SIG 网络](https://github.com/kubernetes/community/tree/master/sig-network)以获得有关 Ingress 和相关资源演变的更多细节。您还可以跟踪 [Ingress 仓库](https://github.com/kubernetes/ingress/tree/master)以获取有关各种 Ingress 控制器的更多细节。

<!--
## Alternatives
-->
## 替代方案

<!--
You can expose a Service in multiple ways that don't directly involve the Ingress resource:
-->
不直接使用 Ingress 资源，也有多种方法暴露 Service：

<!--
* Use [Service.Type=LoadBalancer](/docs/concepts/services-networking/service/#loadbalancer)
* Use [Service.Type=NodePort](/docs/concepts/services-networking/service/#nodeport)
-->
* 使用 [Service.Type=LoadBalancer](/docs/concepts/services-networking/service/#loadbalancer)
* 使用 [Service.Type=NodePort](/docs/concepts/services-networking/service/#nodeport)

{{% /capture %}}

{{% capture whatsnext %}}
<!--
* Learn about the [Ingress API](/docs/reference/generated/kubernetes-api/{{< param "version" >}}/#ingress-v1beta1-networking-k8s-io)
* Learn about [Ingress Controllers](/docs/concepts/services-networking/ingress-controllers/)
* [Set up Ingress on Minikube with the NGINX Controller](/docs/tasks/access-application-cluster/ingress-minikube)
-->
* 了解更多 [Ingress API](/docs/reference/generated/kubernetes-api/{{< param "version" >}}/#ingress-v1beta1-networking-k8s-io)
* 了解更多 [Ingress 控制器](/docs/concepts/services-networking/ingress-controllers/)
* [使用 NGINX 控制器在 Minikube 上安装 Ingress](/docs/tasks/access-application-cluster/ingress-minikube)
{{% /capture %}}