1.3 KiB
1.3 KiB
| layout |
|---|
| documentation |
{% include base.html %}
Pulseaudio Binding
This binding integrates pulseaudio devices.
Supported Things
The Pulseaudio bridge is required as a "bridge" for accessing any other Pulseaudio devices.
You need a running pulseaudio server whith module module-cli-protocol-tcp loaded and accessible by the server which runs your openHAB instance. The following pulseaudio devices are supported:
- Sink
- Source
- Sink-Input
- Source-Output
- Combined-Sink
Discovery
The Pulseaudio bridge is discovered through mDNS in the local network.
Thing Configuration
The Pulseaudio bridge requires the ip address (or a hostname) and a port (default: 4712) as a configuration value in order for the binding to know where to access it.
Channels
All devices support some of the following channels:
| Channel Type ID | Item Type | Description | ||
|---|---|---|---|---|
| volume | Dimmer | Volume of an audio device in percent | ||
| mute | Switch | Mutes the device | ||
| state | String | Current state of the device (suspended, idle, running, corked, drained) | ||
| slaves | String | Slave sinks of a combined sink | ||
| routeToSink | String | Shows the sink a sink-input is currently routed to |
Full Example
t.b.d.