4.5 KiB
| layout | title |
|---|---|
| documentation | RF9517 - ZWave |
{% include base.html %}
RF9517 Accessory Switch
This describes the Z-Wave device RF9517, manufactured by Cooper Wiring Devices with the thing type UID of cooper_rf9517_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The RF9517 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
Aspire RF Accessory Switch Compatible with Aspire RF switch (RF9501, RF9518) for wireless 3-way control eliminating the need for traditional 3-way wiring (up to 5 locations)
Inclusion Information
switch will have blinking blue LED when first powered on initiate inclusion mode on controller device press the RF9517 button once RF9517 blue LED should turn solid indicating inclusion.
Exclusion Information
initiate exclusion mode on controller device press the RF9517 button once RF9517 blue LED should begin blinking indicating inclusion.
Channels
The following table summarises the channels available for the RF9517 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
| Scene Number | scene_number | scene_number | Number |
Switch
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
Device Configuration
The following table provides a summary of the 1 configuration parameters available in the RF9517. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Delayed OFF time | The time in seconds the switch will delay when trigger the delayed off feature |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
Parameter 1: Delayed OFF time
The time in seconds the switch will delay when trigger the delayed off feature
Values in the range 0 to 255 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Switch All Mode
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The RF9517 supports 2 association groups.
Group 1: Group 1
Association group 1 supports 5 nodes.
Group 127: Group 255
Association group 127 supports 1 node.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_NODE_NAMING_V1 | |
| COMMAND_CLASS_HAIL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_INDICATOR_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.