8.5 KiB
| layout | title |
|---|---|
| documentation | ZME_TIO_4S - ZWave |
{% include base.html %}
ZME_TIO_4S TION 4S Ventilator
This describes the Z-Wave device ZME_TIO_4S, manufactured by Z-Wave.Me with the thing type UID of zwaveme_zmetio4s_00_000.
The device is in the category of HVAC, defining Air condition devices, Fans.
The ZME_TIO_4S supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
Compact ventilation system, developed by tion.ru
Inclusion Information
Turn off device until yellow light shows, press and keep power button until blue color starts blinking
Exclusion Information
Turn off device until yellow light shows, press and keep power button until blue color starts blinking
General Usage Information
Channels
The following table summarises the channels available for the ZME_TIO_4S -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Power switch | switch_binary | switch_binary | Switch | Switch |
| Thermostat mode | thermostat_mode | thermostat_mode | Temperature | Number |
| Setpoint (heating) | thermostat_setpoint | thermostat_setpoint | Heating | Number:Temperature |
| Thermostat mode 1 | thermostat_mode1 | thermostat_mode | Temperature | Number |
| Setpoint (heating) 1 | thermostat_setpoint1 | thermostat_setpoint | Heating | Number:Temperature |
| Power switch | switch_binary2 | switch_binary | Switch | Switch |
| Air Type | switch_binary3 | switch_binary | Switch | Switch |
| FanSpeed | switch_dimmer4 | switch_dimmer | DimmableLight | Dimmer |
| sensor (InflowTemperature) | sensor_temperature5 | sensor_temperature | Temperature | Number:Temperature |
| sensor (Outflow Temperature) | sensor_temperature6 | sensor_temperature | Temperature | Number:Temperature |
Power switch
on/off device switch
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Thermostat mode
Heater mode of external air
Sets the thermostat.
The thermostat_mode channel is of type thermostat_mode and supports the Number item and is in the Temperature category.
The following state translation is provided for this channel to the Number item type -:
| Value | Label |
|---|---|
| 0 | Off |
| 1 | Heat |
| 2 | Cool |
| 3 | Auto |
| 4 | Aux Heat |
| 5 | Resume |
| 6 | Fan Only |
| 7 | Furnace |
| 8 | Dry Air |
| 9 | Moist Air |
| 10 | Auto Changeover |
| 11 | Heat Economy |
| 12 | Cool Economy |
| 13 | Away |
Setpoint (heating)
Air heating temperature
Sets the thermostat setpoint.
The thermostat_setpoint channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Thermostat mode 1
Sets the thermostat.
The thermostat_mode1 channel is of type thermostat_mode and supports the Number item and is in the Temperature category.
The following state translation is provided for this channel to the Number item type -:
| Value | Label |
|---|---|
| 0 | Off |
| 1 | Heat |
| 2 | Cool |
| 3 | Auto |
| 4 | Aux Heat |
| 5 | Resume |
| 6 | Fan Only |
| 7 | Furnace |
| 8 | Dry Air |
| 9 | Moist Air |
| 10 | Auto Changeover |
| 11 | Heat Economy |
| 12 | Cool Economy |
| 13 | Away |
Setpoint (heating) 1
Sets the thermostat setpoint.
The thermostat_setpoint1 channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Power switch
Switch the power on and off.
The switch_binary2 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Air Type
off - inflow
on - room
Switch the power on and off.
The switch_binary3 channel is of type switch_binary and supports the Switch item and is in the Switch category.
FanSpeed
Fan speed, step 16
1 - 16
2 - 32
3 - 48
4 - 64
5 - 80
6 - 96
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer4 channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
sensor (InflowTemperature)
Indicates the current temperature.
The sensor_temperature5 channel is of type sensor_temperature and supports the Number:Temperature item and is in the Temperature category.
sensor (Outflow Temperature)
Indicates the current temperature.
The sensor_temperature6 channel is of type sensor_temperature and supports the Number:Temperature item and is in the Temperature category.
Device Configuration
The following table provides a summary of the 2 configuration parameters available in the ZME_TIO_4S. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 20 | AllowsFirmwareUpdates | Firmware updates |
| 66 | Fibaro | Fibaro controller compatibility |
Parameter 20: AllowsFirmwareUpdates
Firmware updates Defines if firmware update allowed Values in the range 0 to 0 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_20_4 and is of type INTEGER.
Parameter 66: Fibaro
Fibaro controller compatibility
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | fibaro |
| 1 | non fibaro |
The manufacturer defined default value is 1 (non fibaro).
This parameter has the configuration ID config_66_2 and is of type INTEGER.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The ZME_TIO_4S supports 1 association group.
Group 1: Lifeline
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation. Lifeline Lifeline group
Association group 1 supports 10 nodes.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_THERMOSTAT_MODE_V1 | |
| COMMAND_CLASS_THERMOSTAT_SETPOINT_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_V4 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | |
| COMMAND_CLASS_SECURITY_V1 |
Endpoint 1
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_THERMOSTAT_MODE_V1 | |
| COMMAND_CLASS_THERMOSTAT_SETPOINT_V1 |
Endpoint 2
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 |
Endpoint 3
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 |
Endpoint 4
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1 |
Endpoint 5
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SENSOR_MULTILEVEL_V7 |
Endpoint 6
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SENSOR_MULTILEVEL_V7 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.