3.6 KiB
| layout | title |
|---|---|
| documentation | ML LD300 - ZWave |
{% include base.html %}
ML LD300 Scene Capable Plug-in Dimmer
This describes the Z-Wave device ML LD300, manufactured by Monster Cable with the thing type UID of monster_mlld300_00_000.
The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.
The ML LD300 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
300 Watt Scene Capable Plug-In Lamp Dimming Module with Z-Wave Technology for CFL/LED/Incandescent. Turn any standard receptacle into the essence of ‘smart’ lighting with the scene capable plug in lamp dimming module. The low-power radio waves travel easily throughout the walls and floors of your home. Features: On/Off/Dim/Bright incandescent load scene and zone control switching capabilities.
Unit made by Leviton, similar to VRPD3 model
Inclusion Information
- Plug in Leviton VRPD3
- Place controller in inclusion mode
- Press button on front of VRPD3
If successful, the VRPD3 LED will turn orange during inclusion and then green. The LED will flash red if it fails.
Exclusion Information
- Place controller in exclusion mode
- Press button on front of VRPD3
If successful, the VRPD3 LED will turn orange during exclusion and then green. The LED will flash red if it fails.
Channels
The following table summarises the channels available for the ML LD300 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Scene Number | scene_number | scene_number | Number |
Dimmer
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Scene Number
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
Device Configuration
The device has no configuration parameters defined.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The ML LD300 supports 1 association group.
Group 1: Group 1
Association group 1 supports 5 nodes.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_NODE_NAMING_V1 | |
| COMMAND_CLASS_HAIL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.