openhab-docs/_addons_bindings/zwave/doc/honeywell/zw4103_0_0.md

layout	title
documentation	ZW4103 - ZWave

{% include base.html %}

ZW4103 Z-Wave Plug in Smart Switch

This describes the Z-Wave device ZW4103, manufactured by Honeywell with the thing type UID of honeywell_zw4103_00_000.

The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.

The ZW4103 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

Control, automate, and schedule your homes lighting and appliances with the Plug-In Smart Switch. Using this Smart Switch means taking control of your homes lighting and appliances regardless of if you are in a different part of your home, the couch, work or away on vacation - all from your mobile device and Z-Wave compatible hub.

The plug-in smart switch gives you wireless control of your plug-in lighting and appliances from any mobile device, computer or Z-Wave enabled remote via a Z-Wave Certified gateway/hub. Automating you lights will not only make your life easier but it will also save energy, cut costs, and boost your home’s security. Plug-in Smart Switch has 1 grounded outlet located on the left side of the module and leaves bottom outlet

Schedule timed events and customize scenes for day or night, home or away - wirelessly control from anywhere through your smartphone, tablet, PC or Z-Wave remote

• Features 1 controlled grounded outlet w/ manual ON/OFF & program button - works with all LED, CFL, halogen and incandescent bulbs and other devices
• Requires a Z-Wave Certified Hub: Compatible with the following Z-Wave Hubs: Honeywell, Ring, SmartThings, Wink, HomeSeer, Fibaro, Trane, Nexia, ADT, Vera, and more
• Simply plug the module into any in-wall outlet, then connect your light to the smart outlet located on the left side of the plug-in
• 2nd wallplate outlet still free for use

Inclusion Information

1. Follow the instructions for your Z-Wave certified controller to include the device to the Z-Wave network.
2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.
3. Once your controller has confirmed that the smart switch has been included, refresh the Z-Wave network to optimize performance.

Exclusion Information

1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.
2. Once the controller is ready to exclude your device, press and release the manual/program button on the smart switch to exclude it from the network. 

General Usage Information

Channels

The following table summarises the channels available for the ZW4103 -:

Channel Name	Channel ID	Channel Type	Category	Item Type
Switch	switch_binary	switch_binary	Switch	Switch
Scene Number	scene_number	scene_number		Number

Switch

Switch the power on and off.

The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel is of type scene_number and supports the Number item.

Device Configuration

The following table provides a summary of the 1 configuration parameters available in the ZW4103. Detailed information on each parameter can be found in the sections below.

Param	Name	Description
3	LED Light	Changes the behavior of the LED light
	Switch All Mode	Set the mode for the switch when receiving SWITCH ALL commands

Parameter 3: LED Light

Changes the behavior of the LED light

Values in the range 0 to 2 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -:

Value	Description
0	Exclude from All On and All Off groups
1	Include in All On group
2	Include in All Off group
255	Include in All On and All Off groups

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The ZW4103 supports 3 association groups.

Group 1: Lifeline

The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation. Supports device reset locally and receives unsolicited status updates

Association group 1 supports 5 nodes.

Group 2: Single Press

Association Group 2 supports BasicSet and is controlled by single pressing the button

Association group 2 supports 5 nodes.

Group 3: Double Press

Association Group 3 supports BasicSet and is controlled by double pressing the button

Association group 3 supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class	Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_BINARY_V1
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SCENE_ACTIVATION_V1
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1
COMMAND_CLASS_CRC_16_ENCAP_V1
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_ZWAVEPLUS_INFO_V1
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_VERSION_V2

Documentation Links

• Honeywell_ZW4103_UserManual

---

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.