3.0 KiB
| layout | title |
|---|---|
| documentation | GR-105N - ZWave |
{% include base.html %}
GR-105N Z-Wave Motor for water/gas ball valves
This describes the Z-Wave device GR-105N, manufactured by EcoNet Controls with the thing type UID of econet_gr105n_00_000.
The device is in the category of Valve, defining Valves used to control water or gas. e.g. a flow stop valve..
The GR-105N supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
This valve clamps onto your existing valve, allowing you to open/close the valve via Z-Wave as soon as you notice a problem.
Inclusion Information
With controller in inclusion mode, triple-press valve button within 1 second to include.
Exclusion Information
With controller in exclusion mode, triple-press valve button within 1 second to exclude.
Holding the valve button for more than 10 seconds resets to factory default settings.
Channels
The following table summarises the channels available for the GR-105N -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
Switch
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Device Configuration
The device has no configuration parameters defined.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The GR-105N supports 1 association group.
Group 1: Group1
Sends state updates when the valve is operated locally with the valve button.
Association group 1 supports 5 nodes.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.