3.1 KiB
| layout | title |
|---|---|
| documentation | VRCS2 - ZWave |
{% include base.html %}
VRCS2 Vizia RF + 2-Button Scene Controller with Switches
This describes the Z-Wave device VRCS2, manufactured by Leviton with the thing type UID of leviton_vrcs2_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
Overview
Leviton VRCS2 Vizia RF + 2-Button Scene Controller with Switches for Multi-Location Scene Control
Inclusion Information
There are three different inclusions to be completed with this device.
- Include the complete switch on the network (Press both buttons simultaneously until both sets of leds start blinking)
- Include the top button (Press the top button until led starts flashing)
- Include the bottom (Press the bottom button until the led starts flashing)
Exclusion Information
Press both buttons simultaneously until both sets of leds start blinking. Exclude device
Channels
The following table summarises the channels available for the VRCS2 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
| Scene Number | scene_number | scene_number | Number |
Switch
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
Device Configuration
The device has no configuration parameters defined.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | Linked to BASIC |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_NODE_NAMING_V1 | |
| COMMAND_CLASS_HAIL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_MANUFACTURER_PROPRIETARY_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.