3.3 KiB
| layout | title |
|---|---|
| documentation | 12387 - ZWave |
{% include base.html %}
12387 Design Pro LED Z Wave Dimmer Module
This describes the Z-Wave device 12387, manufactured by Kichler with the thing type UID of kichler_12387_00_000.
The device is in the category of Light Bulb, defining Devices that illuminate something, such as bulbs, etc..
Overview
The Kichler Z-Wave® full range dimmer is designed to allow your Kichler Design Pro LED fixtures to communicate with one another as well as to be added to an already existing Z-Wave network.
Inclusion Information
NOTE: There is a time limit of approx. 20 seconds to complete Step 1. If light fixture(s) blink 10 times while performing Step 1, this means that the time has expired and it will be necessary to repeat the process from the beginning.
- Press & release recessed RESET button. (The secondary dimmer light fixture will blink 2 times)
- Press & hold both (+) button and (-) button until both the primary dimmer light fixture and secondary dimmer light fixture blink 2 times. (Hold for approx. 2 seconds)
Exclusion Information
NOTE: There is a time limit of approx. 20 seconds to complete Step 1. If light fixture(s) blink 10 times while performing Step 1, this means that the time has expired and it will be necessary to repeat the process from the beginning.
- Press & release recessed RESET button. (Secondary dimmer light fixture will blink 2 times)
- Press & hold both (+) and (-) until both the primary and secondary dimmer light fixtures blink 2 times (Hold approx. 2 seconds)
Channels
The following table summarises the channels available for the 12387 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
Dimmer
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Device Configuration
The device has no configuration parameters defined.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The 12387 supports 1 association group.
Group 1: Group 1
Association group 1 supports 5 nodes.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1 | Linked to BASIC |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.