openhab-docs/_addons_bindings/zwave/doc/cooper/rfldmdimmer_0_0.md

layout	title
documentation	RFLDM - ZWave

{% include base.html %}

RFLDM ASPIRE RF Plug-In Z-Wave Lamp Dimmer

This describes the Z-Wave device RFLDM, manufactured by Cooper Wiring Devices with the thing type UID of cooper_rfldmdimmer_00_000.

The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.

The RFLDM supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

Plug-in dimmer; 300W. ASPIRE RF Wireless Plug-In Module 15A, 120V/AC grounding receptacle for use with a wide variety of lamps and appliances. Module can be controlled remotely by other RF devices through association of up to 5 devices.

Inclusion Information

1. This product may be added to a new or existing Z-Wave network. The device has an amber LED, which will blink when the device is not included in a Z-Wave network. The LED stops blinking when the device is in a network.
2. To include this device in a Z-Wave network, select the command on your Z Wave controller for inclusion (Install, Add Device, Add Node, Include Device, etc.). Then press the device control switch one time to include it in the network. The LED will stop blinking.

Exclusion Information

To exclude this device from a Z-Wave network, select the command on your Z-Wave controller for exclusion (Uninstall, Remove Device, Remove Node, Exclude Device, etc.). Then press the device control switch one time to exclude it from the network. The LED will start blinking.

Channels

The following table summarises the channels available for the RFLDM -:

Channel Name	Channel ID	Channel Type	Category	Item Type
Dimmer	switch_dimmer	switch_dimmer	DimmableLight	Dimmer
Scene Number	scene_number	scene_number		Number
Alarm	alarm_general	alarm_general	Alarm	Switch

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel is of type scene_number and supports the Number item.

Alarm

Indicates if an alarm is triggered.

The alarm_general channel is of type alarm_general and supports the Switch item and is in the Alarm category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value	Label
OFF	OK
ON	Alarm

Device Configuration

The following table provides a summary of the 7 configuration parameters available in the RFLDM. Detailed information on each parameter can be found in the sections below.

Param	Name	Description
1	Delayed Off
2	Panic On Time
3	Panic Off Time
4	Basic Set Value	Not available in earlier versions of the device.
5	Power p State
6	Panic Mode Enable
7	Dimmer Ramp Time
	Switch All Mode	Set the mode for the switch when receiving SWITCH ALL commands

Parameter 1: Delayed Off

Values in the range 0 to 127 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Panic On Time

Values in the range 0 to 127 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Panic Off Time

Values in the range 0 to 127 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Basic Set Value

Not available in earlier versions of the device.

Values in the range 0 to 127 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Power p State

The following option values may be configured -:

Value	Description
1	Off
2	On
3	LAST STATE

The manufacturer defined default value is 1 (OFF).

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Parameter 6: Panic Mode Enable

The following option values may be configured -:

Value	Description
0	Off
1	On

The manufacturer defined default value is 0 (OFF).

This parameter has the configuration ID config_6_1 and is of type INTEGER.

Parameter 7: Dimmer Ramp Time

Values in the range 0 to 127 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_7_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -:

Value	Description
0	Exclude from All On and All Off groups
1	Include in All On group
2	Include in All Off group
255	Include in All On and All Off groups

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The RFLDM supports 1 association group.

Group 1: Group 1

Association group 1 supports 1 node.

Technical Information

Endpoints

Endpoint 0

Command Class	Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V2
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SCENE_ACTIVATION_V1
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_ALARM_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_PROTECTION_V1
COMMAND_CLASS_NODE_NAMING_V1
COMMAND_CLASS_HAIL_V1
COMMAND_CLASS_ASSOCIATION_V1
COMMAND_CLASS_VERSION_V1

Documentation Links

• Manual

---

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.