OpenHAB
/
openhab-docs
mirror of https://github.com/openhab/openhab-docs.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
openhab-docs/_addons_bindings/zwave/doc/samsungsds/hmdm100_0_0.md

6.1 KiB
Raw Permalink Blame History

layout title
documentation hmdm100 - ZWave

{% include base.html %}

hmdm100 Doorlock Control Module for Samsung Locks

This describes the Z-Wave device hmdm100, manufactured by Samsung SDS with the thing type UID of samsungsds_hmdm100_00_000.

The device is in the category of Lock, defining Devices whose primary pupose is locking something.

hmdm100 product image

The hmdm100 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.

Overview

Chip Insert for Zwave controll of the Samsung Lock

Inclusion Information

triple press the inclusing button

Exclusion Information

Triple press inclusion button

Channels

The following table summarises the channels available for the hmdm100 -:

Channel Name Channel ID Channel Type Category Item Type
Door Lock lock_door lock_door Door Switch
Battery Level battery-level system.battery_level Battery Number

Door Lock

Lock and unlock the door.

The lock_door channel is of type lock_door and supports the Switch item and is in the Door category. The following state translation is provided for this channel to the Switch item type -:

Value Label
ON Locked
OFF Unlocked

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The system.battery-level channel is of type system.battery-level and supports the Number item and is in the Battery category. This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.

Device Configuration

The following table provides a summary of the 4 configuration parameters available in the hmdm100. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Security Function 0=Disable 1=Enable 2=SystemDisable 3=SystemEnable 4=RequestForEnable 5=Fail
2 Privacy Mode 0=Disable 1=Enable
3 Registered User ID The number of registered user codes.2
10 Platform 0=Common 1=Samsung SDS
Lock Timeout Sets the time after which the door will auto lock

Parameter 1: Security Function

0=Disable 1=Enable 2=SystemDisable 3=SystemEnable 4=RequestForEnable 5=Fail 0=Disable 1=Enable 2=SystemDisable 3=SystemEnable 4=RequestForEnable 5=Fail

  • 0x02 : Command for disable which is set by platform of Samsung SDS. After setting, if you try to get value of Security Function , '0x00' will be reported.

  • 0x03 : Command for enable which is set by platform of Samsung SDS. After setting, if you try to get value of Security Function, '0x01' will be reported.

  • 0x04 : 'Request for Enable' command which is reported by Doorlock. This cannot be set. (8th function in manual)

  • 0x05 : If the request for 'Request for Enable' command is failed in platform, this will be set by platform of Samsung SDS. Values in the range 0 to 5 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Privacy Mode

0=Disable 1=Enable 0=Disable 1=Enable Values in the range 0 to 1 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Registered User ID

The number of registered user codes.2 The number of registered user codes.

This parameter is supported to ‘Configuration Get Command’ only. Values in the range 1 to 130 may be set.

The manufacturer defined default value is 1.

This parameter has the configuration ID config_3_1 and is of type INTEGER. This is a read only parameter.

Parameter 10: Platform

0=Common 1=Samsung SDS 0=Common 1=Samsung SDS

This value set by platform after device connected with platform of Samsung SDS. Values in the range 0 to 1 may be set.

The manufacturer defined default value is 1.

This parameter has the configuration ID config_10_1 and is of type INTEGER.

Lock Timeout

Sets the time after which the door will auto lock.

This parameter has the configuration ID doorlock_timeout and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The hmdm100 supports 2 association groups.

Group 1: Group1

Association group 1 supports 5 nodes.

Group 2: Group2

Association group 2 supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_ZWAVEPLUS_INFO_V1
COMMAND_CLASS_DOOR_LOCK_V1 Linked to BASIC
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_BATTERY_V1
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_SECURITY_V1

Documentation Links

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.