25 KiB
| layout | title |
|---|---|
| documentation | Da Vinci Switch Default - ZWave |
{% include base.html %}
Da Vinci Switch Default
This describes the Z-Wave device Da Vinci Switch Default, manufactured by Avadesign Technology Co. with the thing type UID of avadesign_davincivsw9_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The Da Vinci Switch Default supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
The Da Vinci wall controller is a Multi Chanel Z-Wave device that contains up to 6 relays and up to 9 touch buttons that can be set to control either the relays (On/Off switches and shutters) or any other on/off (SWITCH_BINARY) , shutter (MULTILEVEL_SWITCH) Z-Wave device.
Inclusion Information
Press the #1 button 3 times.
Exclusion Information
Press the #1 button 3 times.
Channels
The following table summarises the channels available for the Da Vinci Switch Default -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Blinds control | blinds_control | blinds_control | Blinds | Rollershutter |
| Scene Number | scene_number | scene_number | Number | |
| Switch 1 | switch_binary1 | switch_binary | Switch | Switch |
| Scene Number 1 | scene_number1 | scene_number | Number | |
| Switch 2 | switch_binary2 | switch_binary | Switch | Switch |
| Scene Number 2 | scene_number2 | scene_number | Number | |
| Switch 3 | switch_binary3 | switch_binary | Switch | Switch |
| Scene Number 3 | scene_number3 | scene_number | Number | |
| Switch 4 | switch_binary4 | switch_binary | Switch | Switch |
| Scene Number 4 | scene_number4 | scene_number | Number | |
| Switch 5 | switch_binary5 | switch_binary | Switch | Switch |
| Scene Number 5 | scene_number5 | scene_number | Number | |
| Switch 6 | switch_binary6 | switch_binary | Switch | Switch |
| Scene Number 6 | scene_number6 | scene_number | Number | |
| Switch 7 | switch_binary7 | switch_binary | Switch | Switch |
| Scene Number 7 | scene_number7 | scene_number | Number | |
| Switch 8 | switch_binary8 | switch_binary | Switch | Switch |
| Scene Number 8 | scene_number8 | scene_number | Number | |
| Switch 9 | switch_binary9 | switch_binary | Switch | Switch |
| Scene Number 9 | scene_number9 | scene_number | Number |
Switch
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Dimmer
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Blinds control
Provides start / stop control of blinds.
The blinds_control channel is of type blinds_control and supports the Rollershutter item and is in the Blinds category.
Scene Number
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 1
Switch the power on and off.
The switch_binary1 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 1
Triggers when a scene button is pressed.
The scene_number1 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 2
Switch the power on and off.
The switch_binary2 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 2
Triggers when a scene button is pressed.
The scene_number2 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 3
Switch the power on and off.
The switch_binary3 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 3
Triggers when a scene button is pressed.
The scene_number3 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 4
Switch the power on and off.
The switch_binary4 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 4
Triggers when a scene button is pressed.
The scene_number4 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 5
Switch the power on and off.
The switch_binary5 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 5
Triggers when a scene button is pressed.
The scene_number5 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 6
Switch the power on and off.
The switch_binary6 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 6
Triggers when a scene button is pressed.
The scene_number6 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 7
Switch the power on and off.
The switch_binary7 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 7
Triggers when a scene button is pressed.
The scene_number7 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 8
Switch the power on and off.
The switch_binary8 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 8
Triggers when a scene button is pressed.
The scene_number8 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Switch 9
Switch the power on and off.
The switch_binary9 channel is of type switch_binary and supports the Switch item and is in the Switch category.
Scene Number 9
Triggers when a scene button is pressed.
The scene_number9 channel is of type scene_number and supports the Number item.
This channel provides the scene, and the event as a decimal value in the form <scene>.<event>. The scene number is set by the device, and the event is as follows -:
| Event ID | Event Description |
|---|---|
| 0 | Single key press |
| 1 | Key released |
| 2 | Key held down |
| 3 | Double keypress |
| 4 | Tripple keypress |
| 5 | 4 x keypress |
| 6 | 5 x keypress |
Device Configuration
The following table provides a summary of the 29 configuration parameters available in the Da Vinci Switch Default. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | EP 1 Type | EP 1 Type |
| 2 | EP 1 Partner Id | EP 1 Partner Id |
| 3 | EP 1 Blind Duration | EP 1 Blind Duration |
| 4 | EP 1 Output | EP 1 Output |
| 5 | EP 1 Button attribute | EP 1 Button attribute |
| 6 | EP 2 Type | EP 2 Type |
| 7 | EP 2 Partner Id | EP 2 Partner Id |
| 8 | EP 2 Blind Duration | EP 2 Blind Duration |
| 11 | EP 3 Type | EP 3 Type |
| 12 | EP 3 Partner-Id | EP 3 Partner-Id |
| 13 | EP 3 Blind Duration | EP 3 Blind Duration |
| 16 | EP 4 Type | EP 4 Type |
| 17 | EP 4 Partner-Id | EP 4 Partner-Id |
| 18 | EP 4 Blind Duration | EP 4 Blind Duration |
| 21 | EP 5 Type | EP 5 Type |
| 22 | EP 5 Partner-Id | EP 5 Partner-Id |
| 23 | EP 5 Blind Duration | EP 5 Blind Duration |
| 26 | EP 6 Type | EP 6 Type |
| 27 | EP 6 Partner-Id | EP 6 Partner-Id |
| 28 | EP 6 Blind Duration | EP 6 Blind Duration |
| 31 | EP 7 Type | EP 7 Type |
| 32 | EP 7 Partner-Id | EP 7 Partner-Id |
| 33 | EP 7 Blind Duration | EP 7 Blind Duration |
| 36 | EP 8 Type | EP 8 Type |
| 37 | EP 8 Partner-Id | EP 8 Partner-Id |
| 38 | EP 8 Blind Duration | EP 8 Blind Duration |
| 41 | EP 9 Type | EP 9 Type |
| 42 | EP 9 Partner-Id | EP 9 Partner-Id |
| 43 | EP 9 Blind Duration | EP 9 Blind Duration |
Parameter 1: EP 1 Type
EP 1 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 1 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Parameter 2: EP 1 Partner Id
EP 1 Partner Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Parameter 3: EP 1 Blind Duration
EP 1 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Parameter 4: EP 1 Output
EP 1 Output
0 = not used
1 – 6 = Num. of output
Values in the range 1 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_4_1 and is of type INTEGER.
Parameter 5: EP 1 Button attribute
EP 1 Button attribute
Bit [0] = LED enable
Bit [1] = Sound enable
Bit [2] = Dry contact enable
Bit [3] = Motor enable
Values in the range 0 to 7 may be set.
The manufacturer defined default value is 7.
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Parameter 6: EP 2 Type
EP 2 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_6_1 and is of type INTEGER.
Parameter 7: EP 2 Partner Id
EP 2 Partner Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_7_1 and is of type INTEGER.
Parameter 8: EP 2 Blind Duration
EP 2 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_8_1 and is of type INTEGER.
Parameter 11: EP 3 Type
EP 3 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_11_1 and is of type INTEGER.
Parameter 12: EP 3 Partner-Id
EP 3 Partner-Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_12_1 and is of type INTEGER.
Parameter 13: EP 3 Blind Duration
EP 3 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_13_1 and is of type INTEGER.
Parameter 16: EP 4 Type
EP 4 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_16_1 and is of type INTEGER.
Parameter 17: EP 4 Partner-Id
EP 4 Partner-Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_17_1 and is of type INTEGER.
Parameter 18: EP 4 Blind Duration
EP 4 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_18_1 and is of type INTEGER.
Parameter 21: EP 5 Type
EP 5 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_21_1 and is of type INTEGER.
Parameter 22: EP 5 Partner-Id
EP 5 Partner-Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_22_1 and is of type INTEGER.
Parameter 23: EP 5 Blind Duration
EP 5 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_23_1 and is of type INTEGER.
Parameter 26: EP 6 Type
EP 6 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_26_1 and is of type INTEGER.
Parameter 27: EP 6 Partner-Id
EP 6 Partner-Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_27_1 and is of type INTEGER.
Parameter 28: EP 6 Blind Duration
EP 6 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_28_1 and is of type INTEGER.
Parameter 31: EP 7 Type
EP 7 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_31_1 and is of type INTEGER.
Parameter 32: EP 7 Partner-Id
EP 7 Partner-Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_32_1 and is of type INTEGER.
Parameter 33: EP 7 Blind Duration
EP 7 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_33_1 and is of type INTEGER.
Parameter 36: EP 8 Type
EP 8 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_36_1 and is of type INTEGER.
Parameter 37: EP 8 Partner-Id
EP 8 Partner-Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_37_1 and is of type INTEGER.
Parameter 38: EP 8 Blind Duration
EP 8 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_38_1 and is of type INTEGER.
Parameter 41: EP 9 Type
EP 9 Type 1 = switch on/off
2 = blind up
3 = blind down
4 = switch multiway
5 = blind-up multiway
6 = blind-down multiway Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_41_1 and is of type INTEGER.
Parameter 42: EP 9 Partner-Id
EP 9 Partner-Id
Values in the range 0 to 9 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_42_1 and is of type INTEGER.
Parameter 43: EP 9 Blind Duration
EP 9 Blind Duration
Values in the range 0 to 127 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_43_1 and is of type INTEGER.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The Da Vinci Switch Default supports 1 association group.
Group 1: Lifeline
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 5 nodes.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V3 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_MULTI_CHANNEL_V2 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 1
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 2
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 3
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 4
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 5
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 6
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 7
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 8
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Endpoint 9
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_CENTRAL_SCENE_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.