4.3 KiB
| layout | title |
|---|---|
| documentation | GE 12340 (ZW4002) - ZWave |
{% include base.html %}
GE 12340 (ZW4002) In-Wall Smart Fan Control
This describes the Z-Wave device GE 12340 (ZW4002), manufactured by Jasco Products with the thing type UID of ge_12730zw4002_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The GE 12340 (ZW4002) supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Overview
Product Features
- Includes white and light almond paddles that will match most standard wall plates (wall plate not included).
- Can be controlled in groups of multiple devices.
- Easily locate the switch in a dark room with the integrated blue LED indicator.
- Use by itself or with up to four GE add-on switches in three, four, five and six-way wiring configurations.
Product Specifications
- Brand: GE/Jasco
- Model Number: 12730
- Z-Wave Cert Number: ZC08-14110015
Inclusion Information
- Follow the instructions for your Z-wave certified controller to include a device to the Z-wave network.
- Once the controller is ready to include your device, press and release the top or bottom of the smart fan control switch (rocker) to include it in the network. Note: Your controller may need to be within 10 feet of the device to be included.
- Once your controller has confirmed that the device has been included, refresh the Z-wave network to optimize performance.
Please reference the controller/gateway’s manual for instructions. Now you have complete control to turn your fixture ON/OFF and adjust fan speed levels according to groups, scenes, schedules and interactive automation programmed by your controller. If your Z-wave certified controller features Remote Access, you can now control your fixture from your mobile devices.
Note: To exclude and reset the device, follow the instructions provided by your Z-Wave controller
Exclusion Information
- Follow the instructions for your Z-wave certified controller to exclude a device to the Z-wave network.
- Once the controller is ready to exclude your device, press and release the top or bottom of the smart fan control switch (rocker) to exclude it in the network. Note: Your controller may need to be within 10 feet of the device to be exclude.
- Once your controller has confirmed that the device has been excluded, refresh the Z-wave network to optimize performance.
Channels
The following table summarises the channels available for the GE 12340 (ZW4002) -:
| Channel | Channel Id | Category | Item Type |
|---|---|---|---|
| Dimmer | switch_dimmer | DimmableLight | Dimmer |
Dimmer
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.
Device Configuration
The device has no configuration parameters defined.
Association Groups
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
Technical Information
Endpoints
Endpoint 0
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Documentation Links
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.