* Add Alexa mapping along side a channel mapping
It took me a while to find this https://community.openhab.org/t/tagging-devices-for-alexa-support/98155/3 on the Forum and its not clearly documented in the openHAB Amazon Alexa Smart Home Skill or here in Item Metadata.
I originally suggested this as an update to the openHAB Amazon Alexa Smart Home Skill documentaion, but it fits better here, then other integrations using metadata (e.g. HomeKit or Google Assistant) could refer to it as well.
* Update items.md
Nginx warns about low address bits of `192.168.0.1/24` because they are meaningless.
The correct subnet mask should be `192.168.0.0/24`
Signed-off-by: Olivier Béraud <olivierberaud@free.fr>
* Add notes for configuring Synology Diskstation
I have a working set up for SSL enabled remote access on a Synology diskstation, taking advantage of the GUI as much as possible, to ensure automatic renewal of certs from Let's Encrypt, etc. It took me about 8 hours to suss it all out, but it could be achieved in about 30 mins if you knew exactly what to do... may not be widely useful, but since Synology is officially supported, I figured this might be a good addition.
There's also a minor error in the 'allow' masks - these should be 192.168.0.0/24 to allow access to anything in the 192.168.0.xxx range.
* Updated to use one line per sentence
Updated to use one line per sentence - sorry for the delay!
* Update security.md
* Updated for one line per sentence
Updated for one line per sentence
Signed-off-by: Andrew Mills mills@prettymachine.co.nz
* Revision. (openhab#1187)
- Update of screenshots, removal of old screenshots
- Chapters for better formatting
- Removal of ZWave chapter (one example of adding things should be enough IMHO)
- Adding items in simple mode and in "manual" mode
Signed-off-by: Sascha Billian <sascha.billian@googlemail.com>
* Use one line per sentence
Signed-off-by: Sascha Billian <sascha.billian@googlemail.com>
Co-authored-by: Jerome Luckenbach <github@luckenba.ch>
* Revise Java recommendations
* Delete pine.md
Do not recommend PINE, it's not supported any longer by openHABian.
* Removed sidebar link in config
Signed-off-by: Jerome Luckenbach <github@luckenba.ch>
Co-authored-by: Jerome Luckenbach <github@luckenba.ch>
Cancelling an already canceled task has no effect. IMHO this check is not necesssary and removal would simplify the code. I came to this because I saw this pattern in many bindings during reviewing.
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Need to escape \< and \> in the sign off message format so users see them explicitly in the Contributing to the Documentation section.
Signed-off-by: Mark Theiding <mark.theiding@gmail.com>
Added additional structure around install, run, debug and update steps. Provided more pointers to interactions with Eclipse, Maven and Git.
Signed-off-by: Mark Theiding <mark.theiding@gmail.com>
Docker automatically detects the architecture and downloads the appropriate image (openhab/openhab-docker#213).
BuildKit will no longer generate new tags having the architecture (openhab/openhab-docker#293).
Signed-off-by: Wouter Born <github@maindrain.net>
I'm a beginner myself. Though I liked this tutorial very much, it took me some time trying and erroring and finally reading forum posts to get behind this. I didn't even know there was something like a more modern ping. So maybe others are happy to learn this right from the beginning.
Hopefully this will lower the hurdle for people to submit documentation contributions. I know from myself that I didn't submit various documentation improvements, because I didn't know git and thought it would be a much more involved process.
Ideally there would be a separate documentation section, but submitting this under the development contribution page for now (as per discussion with @Confectrician in https://github.com/openhab/openhab-docs/pull/1179#issuecomment-605642091).
Note that I am addressing the issue of DCO failures wrt specifying the full name that I ran into myself in https://github.com/openhab/openhab-docs/pull/1197#issuecomment-615597308. I found a good discussion of the issue at https://github.com/probot/dco/issues/43.
Signed-off-by: Mark Theiding <mark.theiding@gmail.com>
In the tutorial, the generic sitemap description says that ItemType has
to be the same as the type defined in default.items.
Looking at
https://www.openhab.org/docs/configuration/items.html#type and
https://www.openhab.org/docs/configuration/sitemaps.html#element-types
this is incorrect as they take different values.
The example is even mislading as `Switch` is one of the only types which
is common between items and sitemaps. Might be better to describe
`Default` instead.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Added more details around the installation and configuration process.
Fixed that engine no longer logs "Activated scripting support..."
Signed-off-by: Mark Theiding <mark.theiding@gmail.com>
I observed that the unique first word in the labels of items charted in a group isn't causing an empty chart anymore. I'm on openHAB 2.5.1.
Signed-off-by: Juergen Baginski opus42@gmx.de
* Correct usage of its/it's
"It's" is always a contraction of "it is" or "it has". "Its" is a
possessive. Correct a few places where they were used backwards.
Signed-off-by: Bjorn Helgaas <bjorn@helgaas.com>
* Correct "Z-Wave" spelling
Per https://www.z-wave.com/, the canonical spelling appears to be "Z-Wave".
Most places use "Z-Wave" already; change the remaining references to match.
Signed-off-by: Bjorn Helgaas <bjorn@helgaas.com>
* Correct typos and grammatical errors
Correct some typos and grammatical errors.
Signed-off-by: Bjorn Helgaas <bjorn@helgaas.com>
Ben Clark
Jerome Luckenbach
Hilbrand Bouwkamp
Giovanni Mirulla
Christoph Weitkamp
Michael Fielding
garretcook
Thomas Weiler
LeeC77
Andrew Fiddian-Green
Olivier Béraud
Andrew Mills
GumbyMan82
sihui
Wouter Born
TRS-80
Markus Storm
Fabian Wolter
Stefan Zabka
Mark Theiding
Sami Salonen
josefscript
Paulo "JCranky" Siqueira
BugSmurF
Michael Rossner
Christophe Fergeau
robnielsen
Jürgen Baginski
Bjorn Helgaas
jadcx