PlanOptimize is being checked far too frequently. This PR is the simplest change that can be made in order to ensure that PlanOptimize is not being ran too much. To alleviate the frequency I've added a lastWrite parameter to PlanOptimize and added an additional test that mocks the edge cause out in the wild that led to this PR.
Previously in test cases for PlanOptimize I was not checked to see if certain cases would be picked up by Plan I've adjusted a few of the existing test cases after modifying Plan and PlanOptimize to have the same lastWrite time.
Add FutureWriteLimit and PastWriteLimit to retention
policies. Points which are outside of
now() + FutureWriteLimit
or
now() - PastWriteLimit
will be rejected on write with a PartialWriteError.
closes https://github.com/influxdata/influxdb/issues/25424
* fix: prevent retention service from hanging
Fix issue that can cause the retention service to hang waiting on a
`Shard.Close` call. When this occurs, no other shards will be deleted
by the retention service. This is usually noticed as an increase in
disk usage because old shards are not cleaned up.
The fix adds to new methods to `Store`, `SetShardNewReadersBlocked`
and `InUse`. `InUse` can be used to poll if a shard has active readers,
which the retention service uses to skip over in-use shards to prevent
the service from hanging. `SetShardNewReadersBlocked` determines if
new read access may be granted to a shard. This is required to prevent
race conditions around the use of `InUse` and the deletion of shards.
If the retention service skips over a shard because it is in-use, the
shard will be checked again the next time the retention service is run.
It can be deleted on subsequent checks if it is no longer in-use. If
the shards is stuck in-use, the retention service will not be able to
delete the shards, which can be observed in the logs for manual
intervention. Other shards can still be deleted by the retention service
even if a shard is stuck with readers.
closes: #25054
ArrayCursors were ignoring errors, which led to panics when nil
cursors were operated on. This fix passes errors back up the stack
and uses them to enforce healthy cursor creation.
Closes https://github.com/influxdata/influxdb/issues/24789
---------
Co-authored-by: Stuart Carnie <stuart.carnie@gmail.com>
* chore: upgrade Go to 1.19.3
This re-runs ./generate.sh and ./checkfmt.sh to format and update
source code (this is primarily responsible for the huge diff.)
* fix: update tests to reflect sorting algorithm change
* feat: upgrade flux to 0.171.0
Tests failing, safety commit
First step in https://github.com/influxdata/influxdb/issues/23815
* fix: remove "org" parameter" from writeOptSource
I attempted to implement the "orgOpt" argument in a similar fashion
to f6669f7512. However, it looks like Flux doesn't accept "org" as
a parameter to "load". It responds with:
Error calling function \"load\" @113:16-113:30: error calling function \"to\" @6:19-6:47: unused arguments [org]
This brings us from 194 passing to 570 passing.
* fix: temporarily disable broken flux tests
These tests expect rows to be stored in a certain order. However,
nothing is specifying the sort order. This has been fixed in a
later update to flux: (see 3d6f47ded).
Temporarily disable these tests until we include a fixed
version of the flux tests.
* chore: add tests from a492993012
This fixes "test-flux.sh" so it runs tests within the "flux/"
directory. This uncovered some other issues with the tests
located within "flux/". These also needed to be updated
to match the newer flux API.
* feat: upgrade flux to 0.172.0
This includes changes made in "cbbf4b27da". Since "test.go" in 2.x
diverged from 1.x, some modifications were required to make this
compatible.
* feat: upgrade flux to 0.173.0
* feat: upgrade flux to v0.174.0
* fix: Update the condition when reseting cursor (#23522)
Filters that contain `or` may change between cursor resets so we must remember to update the condition in the read cursor.
```flux
|> filter(fn: (r) => ((r["_field"] == "field1" and r["_value"]==true) or (r["_field"] == "field2" and r["_value"] == false)))
```
Closes https://github.com/influxdata/flux/issues/4804
* feat: upgrade flux to 0.174.1
* feat: upgrade flux to 0.175.0
* chore: remove end-to-end tests
These were removed in a492993 for 2.x. These tests prevent "go test ./..."
from completing. As stated in the original commit, these tests should now be
handled by the "fluxtest" harness.
* feat: upgrade flux to 0.176.0
Some tests needed to be disabled within the flux harness. This is a
result of enabling "Optimize Aggregate Window" in flux@05a1065f.
These tests are not present in 2.x. Therefore, I am unsure if
the breakage is resolved in a later commit.
* feat: upgrade flux to 0.177.0
* feat: upgrade flux to 0.178.0
* feat: upgrade flux to v0.179.0
This removes all invocations of "flux.RegisterOpSpec". According
to flux@e39096d5, "flux.RegisterOpSpec" does nothing in the
current version of flux and was removed.
* chore: update fluxtest skip list (#23633)
* chore: manually backport 785a465e9a
This removes the reference to "flux.Spec".
* build(flux): update flux to v0.181.0 (#23682)
* build(flux): update flux to v0.184.2
* chore: skip more Flux acceptance tests
There are issues for each skip detailed in test-flux.sh.
* feat: upgrade flux to v0.185.0
This adds "FluxTesting" to the "HTTPD" configuration. This option is
hidden and disabled by default. When "FluxTesting" is set, it
enables the default testing flags for "Flux".
These flags allow the "vectorized float tests" and tests requiring
the "removeRedundantSortNodes" and "labelPolymorphism" flag
enabled to work. These changes are based off of d8553c002e.
flux@3d6f47ded is included within this version of Flux. Therefore
we can now include the "group_*" tests.
* feat: upgrade flux to 0.186.0
* feat: upgrade flux to 0.187.0
* feat: upgrade flux to 0.188.0
* fix: re-run ./generate.sh with updated protoc
* fix: restrict cores to match CircleCI documentation
Co-authored-by: davidby-influx <dbyrne@influxdata.com>
Co-authored-by: Markus Westerlind <marwes91@gmail.com>
Co-authored-by: Sean Brickley <sean@wabr.io>
Co-authored-by: Jonathan A. Sternberg <jonathan@influxdata.com>
Co-authored-by: Christopher M. Wolff <chris.wolff@influxdata.com>
New argument validation code for _fieldKeys system iterator
broke Enterprise tests because it is misused all over the
place. Back out the safety check.
Compaction logging will generate intermediate information on
volume of data written and output files created, as well as
improve some of the anti-entropy messages related to compaction.
This will also apply to `influx_tools compact`
Closes https://github.com/influxdata/influxdb/issues/21704
Specifically:
* renamed files for consistency between versions
* added `time-interval` schema option
* updated schema example documentation
Back port of improvements from #12710
* gen-init initializes a database based on the provided CLI spec
* gen-exec generates the data for the target database based on the same
CLI spec as gen-init
* utilizes `tsm1.Compactor#CompactFull` to fully compact the specified
shard
* the WAL is unmodified
* added `-verbose` option to show progress as TSM files are opened
WeblWabl
davidby-influx
Geoffrey Wossum
Brandon Pfeifer
Jakub Bednář
Dane Strandboge
Dane Strandboge
Sam Arnold
Edd Robinson
Stuart Carnie
Warren Harper