68 lines
1.9 KiB
Markdown
68 lines
1.9 KiB
Markdown
---
|
|
title: Bosch SHC
|
|
description: Integrate Bosch SHC.
|
|
ha_category:
|
|
- Binary Sensor
|
|
- Cover
|
|
- Hub
|
|
- Sensor
|
|
- Switch
|
|
ha_release: 2021.6
|
|
ha_iot_class: Local Push
|
|
ha_config_flow: true
|
|
ha_codeowners:
|
|
- '@tschamm'
|
|
ha_domain: bosch_shc
|
|
ha_platforms:
|
|
- binary_sensor
|
|
- cover
|
|
- sensor
|
|
- switch
|
|
ha_zeroconf: true
|
|
ha_integration_type: integration
|
|
---
|
|
|
|
The Bosch SHC integration allows you to connect your [Bosch Smart Home Controller](https://www.bosch-smarthome.com) to Home Assistant in order to control and monitor your Bosch Smart Home devices.
|
|
|
|
There is currently support for the following device types within Home Assistant:
|
|
|
|
- [Binary Sensor](#binary-sensor)
|
|
- [Cover](#cover)
|
|
- [Sensor](#sensor)
|
|
- [Switch](#switch)
|
|
|
|
{% include integrations/config_flow.md %}
|
|
|
|
### Binary Sensor
|
|
|
|
The binary sensor platform allows you to monitor the states of your shutter contact and battery sensors. Binary sensor devices are added for each of the following devices:
|
|
|
|
- Shutter Contact
|
|
- Battery powered devices
|
|
|
|
### Cover
|
|
|
|
The cover platform allows you to control your covers. Cover devices are added for each Shutter Control device.
|
|
|
|
### Sensor
|
|
|
|
The sensor platform allows you to monitor the states of your temperature, humidity, purity, air quality, power, energy, and valve tappet sensors. Sensor devices are added for each of the following devices:
|
|
|
|
- Thermostat
|
|
- Wall Thermostat
|
|
- Twinguard
|
|
- Smart Plug
|
|
- Smart Plug Compact
|
|
|
|
### Switch
|
|
|
|
The switch platform allows you to control your outlets and light switches. Switches are added for each of the following devices:
|
|
|
|
- Light Switch
|
|
- Smart Plug
|
|
- Smart Plug Compact
|
|
|
|
## Client registration
|
|
|
|
To start the client registration, press and hold the button on the controller until the LED starts flashing. During configuration, a client SSL cert/key pair is generated and registered on the controller. For this step, the system password of your controller is needed, which was created upon initial setup of the controller.
|